Yes you can, bigwater offcourse, but rather then spending your money getting bigwater, it's better for you to use high end aircooling heatsink.

Quoted from the sifu of watercooling:


If you're serious into watercooling, fork out at least RM600.

Those watercooling set that is on RM300, is just a pure waste of money.

rm300 u better use it for air cooling bro
my second hand set already cost me rm1k.... btw the pump and tubing is new

oh yea....i've big water set before ,even i equip with good pump good RAD it's waste ...just everything not gonna be hold the heat from CPU,water block and Tube ID too small ,pump too weak, rad too small....

now i change mine to swiffty very much better...

m considering joining the WC but first and foremost, would like to know (based on experience gathered by you all people) other than having a good or decent WC materials, what else should i consider...
if u go thru my siggy, u can see that i'm using CM Praetorian 732...i wonder whether it will hold my WC stuff nicely...if anyone has came across someone using WC wif this casing, pls let me know their setup...
really apreciate it...

@sHawTY, pls dont ask me to do it 'naked'...i mean without the casing like u ...btw, r u getting the LCD or the Temjin?

This post has been edited by remysix: Jun 25 2007, 07:52 PM

Who's getting temjin?
Aku tgh pilih antara LCD ngan LL V2000 lar, temjin never came across thru my head.

aiseyman...tersilap...it's LL V2000...sorry kalau rasa terhina (no offense SS owner )
anyway...back to my ori question...

This post has been edited by remysix: Jun 25 2007, 10:20 PM

I feel paiseh everyone quotes me as sifu... LOL

I think you should be able to fit a 2x120mm radiator at the top, but you might not be able to use 1 or 2 drive bays, except for short devices like fan controllers. You have to mod two 120mm fan intakes/exhausts for the top.

ic ic...hmmm...sounds promising...will think it thru...proper planning doesnt hurt, rite ...need to go thru the casing and see where to put the stuff like the pump...resorvoir and all...

btw, Metal, where r u from? puchong jaya???i'm from puchong perdana...just in case IF i decided to go for WC...might need u help ...

@remysix

MTZ is from Ipoh

Anyway, you seriously need to consider WC. Do help alot during OC. Can push higher when the temp is lower

@UPM_Parasite
Ur budget is too low for any decent WC. Prepare at least 600++ and contact MTZ. He will help you out. My WC sifu!

Actually i'm no longer staying there, back in Ipoh already, although once in a while I do stay there if I come down to KL.

haha...stret away changed ur profile...
nvm, will give a serious thought about it...irangan has already told me twice about changing to WC when i changed my C2D to C2Q...will contact u for sure when i decide to go WC

LOL, i haven't changed it since half a year when I came back. Cheers.

This post has been edited by MetalZone: Jun 26 2007, 01:37 PM

sifu MetalZone ...i still waitng the MCW60...one last part to complete my setup...wait...waiting...

Sorry to keep you waiting. Hope to get the next shipment moving soon.
btw, wrong thread to post this ler

what's with the barbs laaa sifu? Tak sabar2 edi

supplier says, this week or next week coming. so keeping my fingers crossed.

finally big day is done, i can continue to hunt for case mod a bit n then installing the wc kit... mtz, i guess i nid 10ft of the tubes lar... inform me when gpu block n radbox reach ur place... might even add another 240mm rad...

---

Added on July 4, 2007, 7:43 pmanyone has a drawing (softcopy) of holes for a 240mm radiator??? i wanna cut 2 x 120mm blowholes for my rad on top of my case... please...!

This post has been edited by HaHaNoCluE: Jul 4 2007, 07:43 PM

I have an autocad drawing I did myself...
Swiftech's website got the drawings for it also actually: http://www.swiftnets.com/assets/images/pro...TIC-708X749.gif

Swiftech, CoolingWorks radiators, the fans are flush next to each other with no gap.
Cool-Trek radiators, there is an approx 3mm gap between the fans (silicone fan dampener/gasket's are provided which covers the gaps air can escape from).
Thermochill radiators, there's an even larger gap between the fans. cant remember off hand how much, but you can find it at their website. they also provide a neoprene gasket to seal the gaps if i'm not mistaken.

This post has been edited by MetalZone: Jul 4 2007, 09:22 PM

been gone through xtremesystem forums before, for the mcp-655(D5) i think its not so good to overvolt it as it only generate for heat and just a littile head pressure if i am not wrong... those xtremesystem forum people do did a test but u got to go there find for it as its an old topic there...
http://www.xtremesystems.org/forums/