I wonder if it's possible to access the BTU and get the reading, like how we could do it with ADSL modems.

Kepong area, I get rather slow connections these few days even Lowyat.

With UniFi also slow.... this is no good then.

Fyi,
they got the reading through a handheld machine/tablet, not from BTU.


This post has been edited by cherroy: Mar 9 2011, 05:40 PM

no need to un plug the btu optic wire cause it no conduct electric. But you can turn off the device to prevent power down during thunder storm. Or install an AVR To protect it.

Past few days uTorrent seem to be slow, speed up & down really vary, not sure whether it's the seeds problem or UniFi doing something .....
Just did some SpeedTest on my 110x IP seem to be ok:

To Washington



To Melbourne



To HongKong




Just get some torrents also seem to be ok even I already exceeded 60GB download this month:


Hope to maintain the same and get the extra 80GB soon
So I think there is no cap, yet,


But I noticed the following on my RB750 past few days:



It was all zero since I put-up those firewall rules on my RB750 2 weeks ago, not sure whether it's normal, or it's some kind of attack/hacking going on

Finally joined the vip5 club.

Here's a few issues:

1)So much for free installation and one month free.Charged me rm400(rm300 for line and stuff and rm100 for installing through the ceiling).Very lame...

2)IMHO please do change the router to another one.Using the tp link router now.For default router wifi number cannot change(for what reason i have no idea).I even gotta call up unifi call centre to get the router password.

For any new subscribers just be wary of the above issues.

my unifi everynight will go slow
like below 2mb speed...sigh~
im on VIP 10 btw..
so it's like crazy weh..
a few of my frenz having d same promblem also

http://twitter.com/TMCorp/status/45330947834523648

Did you know: More than 700,000 km of fibre core access has been deployed to date under the HSBB project

There is a table of charges which includes what is given in free installation and what is not, I presume you had checked it before agreeing to pay? Installation can basically be free if you don't mind a hole through your wall and placing your BTU within 15m fibre from that spot. But you really shouldn't expect people to crawl through your ceiling FOC.

Yea it is just a heads up.There should at least clarify better what is free installation.Guess i gonna enjoy it to the max to recoup my sadness of paying the initial cost..

I saw some houses have PVC plastic conduit n some don't have. So I called the sales n they said it's provided. Is it correct ? I don't want to argue later with the contractor later as cheat if they said it's chargeable.

---

Added on March 9, 2011, 10:12 pmI thought 1m is rm 50? My neighbor contractor told me this quote. How come different?

This post has been edited by hackwire: Mar 9 2011, 10:12 PM

Ya, if you installed 1M also Rm50.
2m - RM50.
3M - Rm50
5M - Rm50
6M - Rm100

They count by 5m per block, as far as I was told.

I think TM can clarify about the need to give up old telephone number when getting Unfii.

One of neighbours enquired with TM about subscribing to Unifi and was told that he cannot maintain the old telephone number and he will be given a new number. He told them that this was a deal breaker and he didn't want to subscribe to Unifi anymore if he had to change the number.

However, the next day someone from TM call back and told him that he can maintain current landline by:
1. Register for Unifi with new phone line
2. Cancel existing Streamyx but maintain old telephone line for one month
3. Then they can do the switch from 2nd month onwards....i.e, old telephone number will be ported into Unifi number.
4. From 2nd month onwards there won't be any rental charges for old telephone - only Unifi package charges.

I think TM needs to clarify this. Their own salespeople are unaware of this. Obviously all the resellers selling Unifi will not have any clue at all that there is a possibility of maintaining old telephone number! The cost is only one month rental for all telephone line.

(Sorry for the repost - thought it would be good to get a reply on the "official" Unifi topic).

I'm running on VIP10 package and yet



Even to local server the download rate is barely 5% of what I'm paying for.

Its been like this for at least 2 weeks

Any idea what's up ?

That seems overly expensive. I only got charged rm150. With 10m extra cable and going thru ceiling somemore.

The default password should be... no password! Check http://unifi.athena.my for the list of all possible ones. The wifi ssid, channel n all can be changed via manual wireless configuration.

log a report to TM helpdesk .

Oops sorry not router password but the pppoe password.

Saw the receipt given by the contractor.It says 15m x rm21=rm315 but they charged rm300 and rm100 for climbing ceiling.Sure is good money for them.

Hehe, I experienced almost similar thing like what has happened to you. Since I was the first, they took longer time though Im staying at the high rise condo. Apparently there was some pairing mistake that they did during the preliminary setup. The pairing was connected to other apartment next to mine. They took more than 2 hours to really locate the problem, but eventually it works

Fortunately, I have been dealing with very nice Unifi technicians so far..

Btw, my post on Sreamyx vs Unifi !

Now i got another problem.Using the TL-WR841N currently and i cannot seem to be able to log in into playstation network.I tried doing wired connection and disabled media server as well.Please advise.

Edit:Hold on Playstation network seems to be having maintenance.Darn.

This post has been edited by Neptern: Mar 10 2011, 02:47 AM