No. It is best (budget wise) to add motion sensor fitted onto the dashboard wired to the stock alarm system. And buy a portable brake lock. Do not buy those stupid steering lock locking the steering wheel and the brake pedal. Those are soo easily cut (at the steering wheel) and removed.

It is something like this






This post has been edited by 2fast2furious: Oct 2 2009, 04:55 PM

If i'm not mistaken, in the manual book, it state persona non-iafm use multilink..and with iafm it state torsion beam... I red it from persona se manual.

I'm just curious. If you said persona use multilink, then it's multilink la

This post has been edited by eastwest: Oct 2 2009, 05:32 PM

wow...is it???..but so far i see most persona on the road also multilink wor...hahaha..could be some error printing..

its error printing la...

proton got no $$$ to create a new platform la...

unless proton slam a persona bodyshell over the exora platform

how much it cost the motion sensor and the brake lock, does that exceed rm200 and where to install the motion sensor? im so noob about car

Hi all

may i know any good proton SC around sunway or subang??

how bro? u managed to get yr back up? sry cant help u here. i hv a a800 only..

Luckily its multilink.... if torsion beam... the ride quality will be different already. but then in terms of maintenance, torsion beam cost less because of the less parts and bushings.

No luck. Sigh.. Right now it needs a program to turn it off.
Anyway, I managed to install PapaGO X3 on my device. It works like a charm! What is the resolution of your A800? The version I'm using only supports 480 x 272.

anyone remove their cat con? how is the performance compare to a 4-2-1?

Anyone know where to get this 7 spoke rims ? This one is from Waja and Gen 2 MME. I reckon this would be 195/50 R16.

yeah me too..got some vibrating sound from aircond...do u hav tik tik sound when activate d wiper?

i think its smaller. i dont really know but i am following yr every instructions.

now i hv a buggy problem. i can shut down properly. but!!! my volume automatically increases whn i run the map nvigation. say i reduced the volume to 20%. whn i run "go to" select destination, thn it calculate the best route. thats whn the volume automatically increases.. to 100%!!! tats very annoying. trying to look for a remedy to it. so far i cant find any

To overcome this problem, first of all, set the backlight of your unit to 'Always ON'. Then in the setting of Garmin, goto 'Settings > Display > Backlight Override' and uncheck all the check boxes. This will prevent the program to trigger the bug. Hope this helps!

---

Added on October 4, 2009, 12:32 amI peeked under my car just now. It looks more like a torsion beam. Are you a non IAFM owner, if yes then can you take a photo of your suspension? I wanna compare with mine. Thank you.

---

Added on October 4, 2009, 12:38 amMy air cond vent is vibrating too. Regarding the 'tik tik' sound, it is the sound from relay if not mistaken. Correct me if I'm wrong.

This post has been edited by roiss: Oct 4 2009, 12:38 AM

Hi fren, thanks for sharing out the garmin files & installation guide.
Currently myself is using Garmin on my Nokia xpress 5800. I found that the orignal GPS from my A800 is not user friendly. Therefore I just 'jail' it in my kampung
Now, with your kind sharing, I hope that my A800 can work with garmin and can be released from 'jail'

Btw, roiss, can you share us the Papago's files and installation guide as well
If A800 really cannot work with Garmin, at least I can go for 2nd choice. Thanks fren, good job

---

Added on October 4, 2009, 10:36 amI sent my car to Sungai Besi Eon Service Centre. A guy told me that campro engine is full filled with 4L engine oil, he said only those old engine fill with less than 4L. Dunno he tipu me or not.

At 1st, still thinking to bring back the remaining engine oil, keep the stock and combine it become another 4L

Btw, your SC allow you all to bring you own engine oil?? My SC said NO WAY.must use theirs.

This post has been edited by nofear1979: Oct 4 2009, 10:36 AM

....the engine does not need 4L..la...even let 3.6/3.7 is more than enough as it will show MAX mark or even lower a bit......overfill is not a good thing as it will weaken the seals in the long run thus leaking next time.....best is 1mm below MAX or put in between of MIN & MAX is also enough as it give better FC and lighter acceleration.....just go drain it...la....go normal workshop and tell them to drain it as its overfilled....or best is change oil filter and the oil will decrease a bit......

I will share it soon. But I'm not sure whether it works on A800 since the resolution is different.

And guys, I think all the Persona IAFM in M'sia are using multilink for the rear suspension. I've checked with a mechanic.

But this site, Proton Turkey states that the rear is using Torsion Beam Axle with coil springs.

wats the reso for the papago? can work on A900?

I am using Nokie 5800 too, tomorrow gonna fit the vehicle suction mount...

any good news for us folks who wanna install papago? thanks mate!!