Hooray! I've successfully installed Garmin Mobile XT for my Lokatoo unit!

Steps to install:

Before proceeding, make a backup of the original navigation software by copying a folder named 'Guider' under the SD card root.

1. Download GMXT from http://www.megaupload.com/?d=IPEP11SI

2. Download CEDESKTOP from http://rapidshare.com/files/37224775/ceDesktop.exe

3. Extract the downloaded GMXT. Goto \...\Garmin\Apps\WM\. Look for QueBmp240.dll and rename it to QueBmp240_orig.dll. Then look for QueBmp320.dll and rename it to QueBmp240.all.

3. Copy the folder named 'Garmin' to SD card.

4. Rename the downloaded CEDESKTOP to dp_Guider and replace it with the original one under the 'Guider' folder.

5. Reset the device by switching the ON/OFF button.

6. After resetting, tap on the navigation icon. The Windows will be started and then hidden. Tap once again and you will see a Windows CE interface.

7. Now, execute 'SD card\Garmin\Apps\WM\Que.exe' and look for the Card ID. Use the ID to generate unlock code. Create a notepad file and name it SW.UNL. Copy this file to Garmin folder.

8. Copy your GMAPSUPP.img file to the Garmin folder. Done.


Happy Journey!


Some knowns bugs:

1. Settings of Garmin will restore to default after resetting. (Right now I only leave it in Standby mode to prevent this)
2. Volume of the device will increase after configuring the backlight in Garmin. (Uncheck all the checkboxes regarding to backlight setting. Use the original setting of the unit.)
3. The taskbar of Windows CE cannot be shown properly..

This post has been edited by roiss: Sep 30 2009, 01:23 AM

Will try to install PAPAGO later.. Have you tried it?

You can get it from http://www.malfreemaps.com/viewtopic.php?f=23&t=893

It's free!

---

Added on October 1, 2009, 4:57 pmAny idea how to hard reset the unit huh? I modified the registry and now it cannot be turned off by pressing the button...

This post has been edited by roiss: Oct 1 2009, 04:57 PM

Can someone please export the registry of Lokatoo A900 and post it here? Mine has corrupted. Thank you!

My device cannot be turned off by pressing the button on top after unlocking.. Beware!

Can anyone please make a registry backup of your A900 and send it to me? Urgent! Thanks!

This post has been edited by roiss: Oct 1 2009, 08:20 PM

No luck. Sigh.. Right now it needs a program to turn it off.
Anyway, I managed to install PapaGO X3 on my device. It works like a charm! What is the resolution of your A800? The version I'm using only supports 480 x 272.

To overcome this problem, first of all, set the backlight of your unit to 'Always ON'. Then in the setting of Garmin, goto 'Settings > Display > Backlight Override' and uncheck all the check boxes. This will prevent the program to trigger the bug. Hope this helps!

---

Added on October 4, 2009, 12:32 amI peeked under my car just now. It looks more like a torsion beam. Are you a non IAFM owner, if yes then can you take a photo of your suspension? I wanna compare with mine. Thank you.

---

Added on October 4, 2009, 12:38 amMy air cond vent is vibrating too. Regarding the 'tik tik' sound, it is the sound from relay if not mistaken. Correct me if I'm wrong.

This post has been edited by roiss: Oct 4 2009, 12:38 AM

I will share it soon. But I'm not sure whether it works on A800 since the resolution is different.

And guys, I think all the Persona IAFM in M'sia are using multilink for the rear suspension. I've checked with a mechanic.

But this site, Proton Turkey states that the rear is using Torsion Beam Axle with coil springs.

@Ruztynail

Here you go:

COM 7, baud rate 4800 Click Here

COM 7, baud rate 9600 Click Here

Both with Exit function.

---

Added on October 5, 2009, 5:06 pmSorry, my fault. I have checked with mechanic. It's Multilink!

This post has been edited by roiss: Oct 5 2009, 05:06 PM

Steps to install PaPaGO X3:

1. Download software from HERE.

2. Download SETTING_EN from HERE.

3. Download patch from HERE.

4. Extract and copy the PaPaGO folder to SDMMC.

5. Replace the extracted SETTING_EN with the existing one in 'Organic > EN (English)'

6. Extract the patch, copy it to the PaPaGO folder and launch the program by using the patch.

For latest map updates, you may visit malfreemaps.

3D buildings are not supported in X2. Only regular map.

The two files are for PaPaGO X3, you may use either one (No key needed). And YES, for Garmin, you need different key for different SD cards or devices.

Tools > Settings > About

PaPaGO X3

---

Added on October 17, 2009, 2:10 pmGoing to claim my side signal housing, it's broken! About the IAFM, can I just request for shortening the rod instead of replacing a new unit? It is getting noisier ... cacat betul

This post has been edited by roiss: Oct 17 2009, 02:10 PM

Sorry, the link is broken.. Reuploaded. BTW, mine is still working fine with the original map.

Setting_EN Click HERE

Navi74800.exe Click HERE

This post has been edited by roiss: Oct 19 2009, 07:23 PM

Serial GPS COM 7

Opps! Forgotten yours is A800. My fault. I'm not sure which port is A800 using. You try it one by one until you get the 'Scanning Attached' done. If the right COM port is selected. You will see a number of satellites in the bar graph and also the orbit else wrong COM port. Tell me if it works.

Yupe, it works on A1000.

This post has been edited by roiss: Oct 20 2009, 11:32 PM

Yeah, I've the POI copied into the Garmin folder.. Nice! (Night markets, TnG, Speedcam... bla bla bla)
Anyway, is your Garmin lagging on A800? Mine refresh very slowly.. I'm only using 2D view for navigation..

---

Added on October 21, 2009, 6:39 pm1. Yes, root folder.
2. You just need to rename 'ceDesktop' to 'dp_Guider' and replace it.

Both are good in performance and accuracy, it's just the matter of insufficiency in memory for the Garmin to perform properly. So, I'll recommend you PaPaGO X3 as it runs smoothly, moreover it has 3D buildings + junction view.

---

Added on October 21, 2009, 6:40 pmWhat error did you encounter?

This post has been edited by roiss: Oct 21 2009, 06:40 PM