If you buy directly from spare part shop then the original lamp could be cheaper. Most workshop mark-up the price from spare part shop. That's the trick..

---

Added on September 8, 2009, 1:18 pmHave you check the offset. Mostly standard rims is 6.5JJ while aftermarket doing 7.0JJ

This post has been edited by b48753: Sep 8 2009, 01:18 PM

Anyone repair their headlamp left-right adjuster before ? I'm unable to adjust it as it's over-screwed. Please help.

Anyway , is 7.0J offset rim is okay compare with standard rims 6.5J ? Besides that , is those cheapo rims dependable on ? Finding either 15" ori stock rim or 16".

I've never adjust the headlamp, still stock

7.0 JJ is better coz the rim's width is bigger, better on handling, but beware when rain comes. El-cheapo like Lenso or K-Speed should be ok, but the most important find the lightweight rims so not sacrifice the performance.

Hi guys,
I remembered reading one of the reply about Waja CPS hangout until late in the morning.
One of the cars in the picture attached in the post has a BRIGHT WHITE FOG LAMP.
I totally forgot the brand of that fog lamp already.

Thinking of changing the fog lamp to that BRIGHT WHITE COLOUR also

my rim pic below



weight is same with lenso & KII.. (already test lift up.. really light.. actually want to buy lenso.. but the shop take RM200 for my old rim so i go another shop that offer RM350... )
brand = volkner racing
offset = 6.5JJ
performance achieve = better handling, light steering control, acceleration increase (or just my feeling.. )
cons = tyre noise louder (same tyre use)..

forget to mention.. I already done sound proofing inside cabin (except engine wall area)...
so still sound intrusion not like normal old waja..

finally, after long sleep, my waja give a problem, windows at driver side not functioning, not sure is it the switch or the windows regulator or something malfunction, try to press the switch, its like stuck, oh well, need to go to workshop to check, or maybe anybody have idea to repair it?

Hi everyone! Just bought a 2nd hand 2004 Waja! Really interested to join in to know more about this car.

Welcome to Lowyat Waja Club, orentakumi. Feel free to ask question.....wajarians here r very nice and helpful 1.

I already accumulate 3 problems with the power window:

1) the motor 'kong' - 1 1/2 years after purchase
Synthoms:Windows not moving at all..lucky it happens when the window is closed.
2) power windows button - 3 years after purchase
Synthoms:Windows moving down only. Can't wind up. Click down still can hear motor is working.Very unlcky if this happens.
3) window regulator - 5 years after purchase
Synthoms:Windows moving down smoothly, but winding up stuck. So need to slowly wind up and down abeit again and up, holding the windows in order to full upwind and close the window.

This all happens to the driver side. And i advice you to go directly to parts shop to get the replacement. If not for sure get 'sembelih'..

i have been driving the waja for a month and i must say it is really comfortable... the only problem is that i hear a strange sound when i release the accelerator and when its going 60>km/h.. the sound goes like this 'woooooooo' a wind-like sound... anything i can do make the irritating sound go away?

Is your tranny auto or manual? If say Auto the sound could be possible happens. Did you change the stock rims?

yes... it is auto... nope, still using the stock rims..

For those who want to change their power window regulator or window assembly...can try go to "unhuat auto acc" in front of jusco alpha angle wangsa maju...

they just charge rm150 per side included installation...

i just changed last week..

cheers!

same with mine as well. never really bothered about it, haha.

it happened to me once or twice before. where the switch gets stuck. when pressing cannot feel the "click" right? i took out the power window buttons panel and looked around... took out the button using a screwdriver and put it back on... and it works again. duno why also. i realised the button console heated up pretty much when i could not wind up the window. give it a try before spending

How to open waja front and rear door panel? How many screw need to remove? Thanks.

izzit normal to have this sound? really there's no solution?

I think the sound is caused by the belts? Mine started making that sound recently only.. or perhaps we are talking about different sounds

i dont think its the belt... maybe i should bring it to the mech to check what are the thing that causes it..

If not mistaken 5 nos. Two with the small black cap, one at door jamb handle and two at hand holder..