I have a theory for why this happens.
In this whole world, only Nokia ASIC can do HQoS. All other ASIC must do HQoS in software.

Now as TM try to nest their configuration deeper and deeper, it gets progressively more expensive to perform HQoS and the CPU is pegged.

For DPDK in general, which means all telco grade equipment, each stream will be processed by different core.

In your case by using a IDM, you are basically doing multiple streams, hence on TM side, multiple CPU core is involved and you can saturate your subscribed speed.

How much each core can do HQoS is kind of a trade secret that only vendor and customer knows. Juniper MX Trio 4 ASIC for example, will be pegged at around 5Gbps.

I use Cisco ASR for another example. They quote aggregated bandwidth due to this same reason. Want single stream to max out the port speed? Buy their Silicon One ASIC.

You know what, I try all speedtest server, only Digi at Seri Kembangan can saturate my 2Gbps


All other server give crap speed

What do you think?

ibse02.mc give 7ms before
ibse02.rsh now 12ms, that 5ms increase, even stay in Seremban Town, ping make I stay in Kampung,

This one sounds like the classic case of local congestion.
You keep changing server until you hit the MPLS circuit that's not congested and you get full speed.

HQoS will not cause certain remote endpoint to go faster or slower, they will all sucks equally

well,

two thing now
1. GPON never designed to support 2Gbps (that XGSPON job)
2. My Unifi now congested anywhere, all server slow, except DiGi Seri Kembangan...

It's slow even with PON stick? You are on Nokia OLT now right? Or change already?

Maybe you ask the so called Elite team when their XG/25G/50G PON will come or if they can connect you as trial customer.

The thing now is TM infrastructure is quite old. They had news ZTE installed their next gen network but from what I can observe, ZTE 404.

Even they give you Skyworth on Monday, it still surely EOL by year end after Y units delivered. Let's face it, that's reality.

I haven't try yet, I, currently testing V2.0 hardware and firmware:





Now in open case, I going to try Skyworth Bridge mode see what up speedtest, make sure it's fair test

Anime4000
Care posting a traceroute to both ipv4 and ipv6 of the domain?

How do you do speedtest with DiGi Sri Kembangan?
I only got:
Kuala Lumpur
Petaling Jaya
Subang Jaya
Shah Alam
Penang

Mind getting me the speedtest server ID?

Did the Skyworth or D-Link works without PLOAM password too? This is strange

Indeed! many victim of D-Link now using PON Stick

ZTE, Nokia can accept 16 T-CONT that I spam and upload speed is fixed

when I do same with Huawei OLT, O5 without VLAN given, so...
I had to reduce T-CONT to 4 in disappointment

If you have less than 6 months contract, you can go and apply for SWU.
Previously before moving to SWU 3.0 I had like ~3 months contract left.
Then 3.0 to 5.0 had ~5 months left.

Both were waived and refreshed back to 2 years, no issue

My current package: SWU3.0 RM119/m with free STD.

Digging thru this threads.
What is the best play here to get smoothest upgraded from SWU 3.0> SWU 5.0?
1. Apply online account termination and wait TM sales to call for offer?
2. Apply port out from TM to Allo fiber, Digi fiber, Astro fiber RM90/m and wait TM counter offer?
3. Visit TM point and request for SWU 5.0 but might force to bundle with Unifi mobile?

I don't care about Disney+, Netflix or any entertainment packages.
My ideal package is to get cheapest package RM90/m with free STD, because I think getting a fixed fee is better than temporary free 6 months deal in a long run.
If we ever get boosted again, from 500mpbs > 800Mbps+STD with RM90/m. I think is a crazy deal.

Hi, want to ask, in the last free speed upgrade 2023, those with 800Mbps got speed bump to what speed? 1gbps or 2 gbps?

My SWU 3.0 contract end in Oct 2025, but Unifi allow me to renew SWU 5.0 with no penalty, new contract will start from May 2025 instead of Oct 2025. Die die ask me to take Unifi mobile, gonna cancel it next week.
Request to change my BTU unit as well as my BTU already 10 years.

I suddenly recall TM used to cheat speedtest by prioritizing its traffic.
Maybe in the new HQoS change they forgot to prioritize it anymore hence your speedtest is showing the true speed you are getting.