This sounds good. Thanks for the update

Aisehman, my bad.

just done my 1gbps install, gotten the dlink, speedtest using s22u or ip15pro can get 1.4gbps, but then biggest problem i have is wifi connection, the router sits at ground floor, where i work upstairs, and the wifi connection is really bad, saw some suggestions here to use bridge or ap, so i've used my existing ax73 to be used as ap, wifi improved, but i have intention to upgrade my ax73 to something like be550/be805 or xe75 (1 pack) or be65 (1 pack), but i saw some seniors say if using these as AP, it will waste the hardware, but i just need wider & stronger wifi, and quite happy with the dlink since can achieve 1.4gbps, and bridge will just limits to 940mbps. please advise.

Any reason you need full speed on phone?

I'm using 500mbps. Have requested unifi to change to public IP.
Reason given by them is either i need to have CCTV installed with proof given. Otherwise i will stuck in Private IP.

Does anyone know to export the Fiberhome HG6145F3 config settings to a txt file?

Just got this too.. Thanks for the info

500mbps should come with public IP by default.

Just noticed my 5GHz WiFi channel gets reset to 44 every day on my DIR-X1860Z router.

Is it just me or is it common on this Unifi provided device?

I've been skimming through the old posts and just found out that 300mbps is getting cgnat too. Since when?

Since they "finally" updated their database to reflect the correct package.
I had to email them to get public IP back.

So just now I chat with CS to check if my ip address (300mbps plan) is public ip or private and she told me this. Can someone clarify? I thought 300mbps plan should come with public ip by default?

PRIVATE IP
30 Mbps
50 Mbps
100 Mbps
300 Mbps

PUBLIC IP
500 Mbps
800 Mbps
1 Gbps
2 Gbps

Since October 2023

Later touch n go will come to say
Pls apply 500mbps for public ip
I happy rm119 6 month free 500mbps no problem

Actually the post just few above, asking 300mbps

after switched to time fibre, long time never pay attention to the price of unifi, seems like now unifi is also very affordable for 300Mbps/500Mbps now too... not bad...



so it is strictly no public ip for 300Mbps and below or one can still request for that?



what plan are u using? so 300Mbps and below can still request for public ip?

This post has been edited by westlife: Nov 9 2024, 12:52 PM

how do you optimize speed through MTU tho? using unifi provided router skyworth gn630v and asus rt-ac86u(merlinwrt) instead

or is they any tips and tricks around it?

GN630V run it on bridge mode

Use PPPOE on ASUS router, stick to default MTU 1492 unless you are facing issues

1492 is the highest possible MTU on Unifi

gn630v i did try before for bridge doesn't want to run

Anyone having problem using Rustdesk? I can connect without any problem at my location, but 2 of my clients at different location cannot connect to the Rustdesk server with or without custom DNS, very strange.

Can request but it depend on the Unifi Expert Team who will site visit your premise to check whether it is eligible or not.