bro, having it at 4Ghz is not an issue, but maintaining the heat is another.. and also the side effects of extreme overclocking over a period of time.. hmm

why i cant see the voltage?
what's your vcore in bios?
i already asked you twice here.

This post has been edited by sukhoi37: Jan 17 2008, 08:41 PM

well maintaining it at 3.6 is sufficient enough....

his v core is secret.......... ho ho ho ........

btw 3.4 ghz is suffficent for me, temp also much lower compare to 3.6ghz........ i think i have max out the HR-01 ability, cant maintain below 60oC at 3.6 ghz.

btw anyone uses q6700 ?

whats ur vcore for 3.4 lexus??

Bios setting 1.45, cpu-z show around 1.412 or so......serious v drop.

my q6600 need a lot of volrage to get from 3.2 and above.

I just bought Q6600.. Has managed to push it to 3.0 but, my concern is, why does my multiplier fluctuate from 6 to 9, based on CPU-z? Can I do something to fix the multiplier ?

My spec:
Mobo: Asus P5K
RAM: 2GB Kingston HyperX DDR2800

Currently @ default vcore

coz u didnt disable EIST & C1E function in BIOS

Hmm, i have disabled all the CPU features there, but when I save and reboot, it changes back to default.. Any idea why this is happening ?

EDITED: On top of that, I have flashed my bios to the latest version.. Still, the same problem is occurring..

This post has been edited by vivre: Jan 19 2008, 11:47 AM

Hi guys,im runnning a Q6600 too on G Skill 2x2G rams. The bulk kingmaker is running. What speed you guys suggest i push to using stock cooling? My mobo Fatality F I90HD.

I just OCed my Q6600 to 3.6Ghz 400MhzX9... The Vcore i put is 1.385V. But in Everest and CPUID shows around 1.33V.. This is pretty good i think. My proc doesn't need 1.385V. I tried putting 1.375V and ran a Stability test using everest.. It BSODed after around 5 mins.. so i changed the Vcore to 1.385V and ran it.. It ran fine for 10 mins and i stopped it. I ran SuperPI 32M and it ran for 15 mins and nothing happened.. Everything is all good.. My temps also went up on load to around 65C.

@bernard

try OCCT for 1 hour or run Orthos. Then if u do pass those two, then its considered stable.

4Ghz its around 60C kenot withstand daily use.

what's your vcore?
4ghz with only 60C?!!
aircooling or watercooling?

it might be 60c idle...coretemp might be 70ish

i see.
but most of the time overclocker only bothers the load temp.
if idle at 60C then fulload will pass 80C easily.
mine idle at 39C fulload 69C, vcore 1.51v, ambiet temp 30C.

yeah, u prolly right and prolly the 60c is logical for load since the vcore is only 1.38v to achieve 4G...a gem proc i guess

congratualation bernardryan, u got a good processor there.... hard to get this kind of processor. Try run orthos or OCCT for an hours then u know how good it is.

intel recommended temperature is around 71oC rite, so as long as you run it below the max threshold then it should be ok.

mine is 48C at idle if running 4Ghz !!!!!

wow at multiplier x 9 running at 4GHZ 48c??not bad what about your load,i guess your v core should be around 1.40v to 1.45v..