Just wondering is this ok....can anybody give some comment plz

pic of my primetest

add:
and why when i installed and tried to use core temp 0.95, my screen went blank and nothing else happens after that. Then i restarted the pc all went ok to normal

This post has been edited by ir1z: Dec 30 2007, 06:43 AM

thats the funny thing i dont really know how to use the program anyway. And not sure why there is two cpu readings

add:
after installing asus probe2, the temp on that thing doesnot show any irregularities showing a cpu temp of only 34celcius

This post has been edited by ir1z: Dec 30 2007, 12:53 PM

Ive touch it and it feels warm not hot at all and btw im using the thermaltake v1...

Ive done another one and here is what is shown:



add:

done some benchmark got this:



This post has been edited by ir1z: Dec 30 2007, 01:55 PM

Anyway are those temp for the mb, nb and sb normal or is is too hot, coz i havent oced the proc yet and planning to at least oc the proc to 3Ghz minimum

This post has been edited by ir1z: Dec 30 2007, 09:46 PM

i have used speed fan 4.33 and its still not the same shows lower by 7c compared to core temp.

a few question of mine

1. why when i try to oc to 3.2 using any multiplier 8/9 and use occt to stress out occt keep giving me errors (come out graph result saying error detected)after a few minutes? or the pc would just restart itself? (keep in mind im using custom set vcore)

2. tried using stock vcore and still the problem persist. Using prime95 also gave the same result.

3. Things that i change on my mobo asus maximus formula was only the multiplier 8/9, fsb 333/366/400 and vcore to anywhere btw 1.275-1.54
i did not change any other function on the mobo besided those three options

plz in need of dire help

im using mushkin 4gb of rams without doing any changes for it in bios...

did u change the nb and sb volt as well when u did this? as u said before u tried even up to 1.55 but couldnt get it to stable before?

the moderno shop is located is at subang jaya ss19...

hmm same like me lorr like that. Did try push to 3.6 but couldnt get it to run prime or OCCT on a stable basis, but if use just like that everything seems ok

what were you using before this?

currently at what nb/sb volt are u using if i may ask. coz thinking of doing the same as well....

well maintaining it at 3.6 is sufficient enough....

whats ur vcore for 3.4 lexus??

yaa man... you can put it to 1.5v as long as have good HSF.....that is

well be waiting for ur arrival Xen0

the speedfan must be joking. at idle room temp should not be 22C. u would need an aircond room at least to get those temp. Unless that is if ur using besides air colling on ur rig....

this is my current result after some help from a sifu.....

running at 8x400=3.2
vcore at bios=1.272
others can see in pic provided below


This post has been edited by ir1z: Mar 31 2008, 02:14 PM