damn, still failed to stable at 3.4Ghz, running orthos & suddenly auto-restart
guess what?

it my temp, reach 85c..

BIOS 1.46V, Windows 1.42V
dunno what happen with my quad.. p0or week production maybe

dya run prime95 to ensure stability?

nice ehh.. maybe ur proc better than mine

yepp, kinda crazy to spot the stable setup at 2.4Ghz   

hahaa.. yeah typo -.-.. should be 3.4Ghz

btw, ur 1.39V is load period(uguru sensor) or in BIOS?

confirm ka bro?
very less voltage needed eh..   

3.6 for 1.5v? is kinda high...got any vdroop?

ahh, as long no burn mark, we can always RMA it
no need worry, for next 3 years, there should be better processor than this kentsfield..   

anyone else can give me some tip to get 3.2ghz on my q6600. my full spec is:

1) Intel Core 2 Dua Quad6600
2) Gigabyte P35-Ds3 Mainboard
3)Kington Hyper X PC6400 2GB DDR2-800mhz
4) Seagate 320GB SATA 2
5)Galaxy 8800GTS 512 MN DDR3 256bit
6)Cooler master Real power 620watts Modula

ya..i used OCCT.

Huh?
Why not?

I just change the multiplier in the first page where you change the FSB, the ram to cpu ratio and voltage changing page lor.
It's there under the place where you change the FSB.

Have u tried updating the bios?

Sorry man, i don't want to risk burning either the processor or motherboard since the board is based on 4 phase PWM & the PCB is only based on 4 layers which is a bit too weak for quad core processors.

I have something to ask though, you seriously can't change the multiplier even at any FSB?

I can change the multiplier at any FSB on any bios.
Even on the first bios release i can change the multiplier.

Now i'm on v14 bios, and i'm on 400MHz X 8 too.

Yes, high achievement, but mostly using Core2Duo, not Core2Quad.
I use 1.32Volts when i'm on 400x9.
Didn't test the stability though since i want the processor to only run at highest speed at stock vcore.

Sorry man, i don't want to risk burning either the processor or motherboard since the board is based on 4 phase PWM & the PCB is only based on 4 layers which is a bit too weak for quad core processors.

wow ! you and me same board and processor !!!
what is your temp ??? and settings ?
Temp is around 66C at full load !!! 
im at 3.6Ghz and temp is

44C idle
66C full load

next step i will apply MX-2 to see how is the temp !

What ram are you using CSC? im stuck at 3.6 ghz 400x9 temps seem to be alright tho ... its only at 50C in coretemp

3.6ghz at stock vcore is really something there............

so far mine need around 1.54v to reach 3.6ghz...... but temp is way too high around 65oC, so i back it down...... now back to 3.2ghz...

i'm suspecting that my board is holding me back, 4 phase power seems to be lacking stability........ anyone have comment on this ?

My Vcore now is 1.4V
My ram is Crucial.. look at my sig
wow, thanks for the useful update ! gonna get it now !!!
Guys, Q6600 is well known for its HOT temp !!

hey guys, i'm curious, CoreTemp reports my Q6600 G0 temp around 45C at idle @ stock speed, is this normal? ambient temp is 30C.

even at load the temps just increase to about 47C, sorry i'm kinda a noob in this.

i want to OC my proc to at least 3.6 soon, so wanna makesure 1st.