My Vcore is at 1.2375V. I took it off the auto and set it at 1.2375V. But while on load and idling its at 1.18V from Lavalys Everest. OCed it to 333x9 = 3.0Ghz..

Temps around 35-45 on idle and 55-65 on full load. Btw, using the shitty ass Stock Intel HSF... Going to change to Thermalright Ultra 120 Extreme with Silverstone FM123 and MX-2 Artic Cooling thermal paste. My Casing is Antec P182 and my 3 fans are set to Medium setting...

Here is the Screenshot of my Q6600

[attachmentid=378754]

This post has been edited by bernardryan: Jan 13 2008, 11:46 PM

I just OCed my Q6600 to 3.6Ghz 400MhzX9... The Vcore i put is 1.385V. But in Everest and CPUID shows around 1.33V.. This is pretty good i think. My proc doesn't need 1.385V. I tried putting 1.375V and ran a Stability test using everest.. It BSODed after around 5 mins.. so i changed the Vcore to 1.385V and ran it.. It ran fine for 10 mins and i stopped it. I ran SuperPI 32M and it ran for 15 mins and nothing happened.. Everything is all good.. My temps also went up on load to around 65C.

Update.. I just finished playing Call of Duty 4 at 3.6Ghz 1.3875Vcore.. It was fine...

Then I restarted my comp and tried running OCCT test.. for 1 hour..

After 5 mins into the test.. it says its crashed..

Well.. i looked at my Intel box and it says max Voltage is 1.35V..

Got any advise? Now my system is back to stock.. cause i'm just too lazy to fiddle around and all.. i want to sleep also..