idle 63c / load 83c+

yeah, thats why im trying to get a new cooler then this stock hsf

lol 83c is crazy hot

omg...
i tot the system will auto shutdown when the temperature touched 80C?

you can turn the option off in some motherboard......

but serious it good, u can get it stable at 3.8ghz, but prolong run at 1.55v is rather dangerous

ah, i never said i tried up to 1.55, thats someone else, the max i went was 1.48V, it was stable for prime95 at that voltage. anything below is not.

and yes i did change the nb/sb volt.

my current idle temp is <50C @ 1.45V, but unstable for prime, its stable for normal use, no such crashes or BSOD, gaming, superpi, everest all ran smoothly, no prob.

hmm same like me lorr like that. Did try push to 3.6 but couldnt get it to run prime or OCCT on a stable basis, but if use just like that everything seems ok

in average, can q6600 go .. runs at 3.00ghz on stock vcore?
or need to bump vcore that..

confirm can run 3.0 at stock vcore.

my q6600 is running 3.0 at 1.30v.....stock (auto setting) is 1.38. so that means u can even lower down

my q6600 can run 3.1ghz at stock vcore.

bro,ur Q6600 stock vcore is how low?

Mine runs at 3Ghz at stock vcore too!!!

so is mine
3.0ghz at 1.30vcore.

i am running q6600 3.0 at 1.25 vcore (in windows showing 1.25 or lower .. bios i set to 1.275) .. well box says 1.25v is stock anyways ..

This post has been edited by QiW: Jan 10 2008, 12:28 PM

1.275v

madman why ur auto setting so high 1 ??

hey guys, tried core temp 0.96? although i aint quad core user here, but my m0 e2140 are reporting higher temp, + 15c... compare to b4, 55 to 70c nw omg...

This post has been edited by lichyetan: Jan 10 2008, 07:57 PM

what were you using before this?

its an asus thingy la i gues....when i set to auto pc probe 2 shows 1.38 (or was it 1.36...cant remember)

most likely it needs to compensate for the vdroop

wah asus so siao 1 meh ? but compensating for v drop also no need that much i guess......... but mine is having some serious v drop issue more then 0.03v scary.....

lichyetan, i like to know also ..... the temp so high even u using water cooling... OMG... better check mine with latest version see correct or not..... later on my pc fry....

my pc..

Abit F-I90HD
Crucial Ballastix Tracer 1066 2G

i got an question..

for number 1. why my cpuz showing 'asynch.' ?

for number 2. its need to use this test 'Blend - stress CPU and RAM', and why?

nood here..

My Vcore is at 1.2375V. I took it off the auto and set it at 1.2375V. But while on load and idling its at 1.18V from Lavalys Everest. OCed it to 333x9 = 3.0Ghz..

Temps around 35-45 on idle and 55-65 on full load. Btw, using the shitty ass Stock Intel HSF... Going to change to Thermalright Ultra 120 Extreme with Silverstone FM123 and MX-2 Artic Cooling thermal paste. My Casing is Antec P182 and my 3 fans are set to Medium setting...

Here is the Screenshot of my Q6600

[attachmentid=378754]

This post has been edited by bernardryan: Jan 13 2008, 11:46 PM