it failed because of ram timing?


Attached thumbnail(s)

could be.. seems ur timing already loose..
u mixed the ram?

try increase the vNB or something..

yah. i mixed the ram. 1 stick of 1GB n 1 stick of 2GB. both timing 4-4-4-12 (stock) 800MHz.

This post has been edited by atomik: Jun 17 2009, 12:41 PM

Nah, ram timing does not contribute to core failure during prime stress test
if your ram or the timing is problematic, you just simply gonna get BSOD or crash

try up the vcore, maybe the vdroop is just too much during cpu load.
looking at your CPU-Z obviously 1.325 drops to 1.248 is not good, need around 1.27v-1.28v for the cores to retain stability.

but with 1.325v I can reach 3.2 easily

This post has been edited by Vigilant: Jun 17 2009, 06:06 PM

This case almost same like me.
3Ghz no problem... 3.1Ghz... hell for me.

i did 3.2 wit 1.29xxx vcore setting @ bios & a little bit of NB voltage bump with C1E & ESIT enable.
but the real vcore is a bit lower den wat the bios said, just 1.264 max in real time.
tested wit 5 loops of IBT, stable.
vdrop during load is 1.232

This post has been edited by tech3910: Jun 17 2009, 07:00 PM

aiseh bang 3910 pakai quad ker ... main oc giler giler pulak tuh

This post has been edited by iBenQ: Jun 17 2009, 08:45 PM

ahaks, why dont tell me earlier. might try this night.

thats vdrop and vdroop.

thanks guys, now achieve my expectation 3.2Ghz

will push more later.

This post has been edited by atomik: Jun 20 2009, 12:14 PM


Attached thumbnail(s)

Go push more, get at least 3.4Ghz or 3.6Ghz
That would be better

Dude don't push him lar.

3.2Ghz at 81'c is very danger =.=" 3.4Ghz?

dun worry. i got lot of time to tweak here n there.

patience is the key to success. am i right?

Bro, try to get a better CPU cooler. There will be better protection and enhance the performance for your processor.

Could you suggest one?
He already on TRUE there

u mean going Fanless? right now using thermalright true 120 for cpu cooler.

i think P&P can help me a lil bit.

last night i try up the FSB about 5-8, and FSB strap to NB in AUTO, then ram running on 890MHz, after 14 miutes OCCT test, core 0 error, i edy try increase the Vcore n Vmch but still not solve the prob. is it my ram is the barrier?

356x9 - 364x9
vcore 1.39v
Vmch 1.22v
Vdimm 1.89v

aik? I thought you already got 3.2ghz?

3.2Ghz edy achived.

over 3.2Ghz cant go. blue screen if running the ram 870Mhz or more.

if running below 800MHz (736MHz), got error on OCCT test. no idea. just tested increase vcore, vmch, n vdimm kaw2 but issues still remain the same. i think the ram ler.

try 1.45vcore

go wit 1:1 ratio 1st.
wen u happy wit the core speed, den only tweak the ram.