yup, all those 3 stuff on BIX 2

btw how come u took the radiator not enuf toys ar ?



mine 1.275v stock vcore

your ram should be capable of running 475x8

but not all quad can do high fsb, you can try playing with multi x9 instead

i noe bro . shud be able to run 475x8 .
but d problem is i whenever i go for 415FSB oso will get BSOD .
i think its my RAM really noob wan .
mind share anything bro ?

try multi 6x, and pump your fsb and see how high it can go. How about your ram ? tested stable ? what about alpha timings ?

my Q6600 to 3.6GHz
i setting to 1.375 v to run the 3D mark 06.idle 48 ,full load 70

What stepping is your proc? G0?


Yes, BurgerRI my proc is G0 stepping de.Can u give me some idea to clock till 3.6ghz with stable????Thanks

wah 1.375 for 3.6ghz very nice ur proc !
i nid 1.45 but still considered ok la .

hmm uzairi me dunno play RAM so much ^^, hehe
i tried reducing timer, add voltage, tRFD set 50 PL lvl 8 , watsoever oso cant get it stable .

is there by chance dat my proc wont allow me do 3.8ghz ?

running 3dmark06 doesnt mean that your proc is stable at that clock with that voltage

Try to clock as much as you can with stock vcore, see how much you can get till you hit the ceiling with the stock vcore. From there only you can progress further notch by notch. There's no shortcut to success

There is no particular reason for your proc unable to run at 3.8ghz if every combination and setting were met, unless your q66 are already at its limit.

dun think so woo , i did get to boot even at 4.05ghz .
but cant get it stable >.<"
mostly BSOD all d way .

Able to boot doesnt mean its stable, tried 3.7ghz and 3.8ghz ? Make them stable first, then only aim for higher clock.

Try to play with vtt, vnb and gtlref. You should know you ram limit too so that you know that its not the ram that is the culprit.

thats y ddr3 is so good... i never have to care about ram freq if i wanna go for high clocks... but maybe if wanna go for very high fsb, it could be limiting it T_T... previously managed to get 510mhz bus speed for q6600, my q9650 now, gets only 514mhz... will buy ocz xmp edition once i got me pay ... my highest clock, but never get the chance to enter windows, 4.4ghz hahahahahahaha... benchmark stable, 4.05ghz lo T_T

ow well , i noe dat bootable doesnt mean stable , but dat's wat im trying to tell u , even if i raise FSB up to 405 , i get BSOD >.<"
even when i pump +0.1v for dimm .

Do you guys do any setting at advanced timing control? i left it auto @@
btw i using gigabyte mobo. no sure Asus mobo got this setting or not.

got got

i got play with it oso

but i drop 1 or 2 timing oni, my value ram aint that almighty, no point trying harder

wat is diz minor timing, alpha timing, beta timing ?
mind share wif us ar ?

u rich ma

can oc i7 920 with cm v8?? if yes then reccomended volt

not that im rich, i jz have normal ddr3 board and value ddr3 T_T.. any oc'ers would get good boards+performance ram = same price like my mobo+ram

yes u can?but here's for q6600 not for i7...

consider rich also ddr3 T.T i only using ddr2 T.T
hmm....any else nice mobo that can support ddr3 for reco?

u can find my thread in garage sales, the mobo is as my cpu-z validation link

that time i was planning to get p5q3 pro :'(