asus p5q pro is good mobo, mine also user of p5q pro and i m new on q6600 go (just got it yesterday).

will update to ya when i start play with my new toy. (not so soon)

This post has been edited by atomik: May 24 2009, 04:20 AM

mobo dead already. waiting for RMA.

http://www.overclockersclub.com/reviews/asus_p5q_pro/3.htm

the links for reference.
i read last night forum on Q6600 (on other website), they said kinda hard to kill the proc. for 4GHz, i think might kill the proc. sory for noob question, i m new on Q core.

anyway, 4GHz on WC or AC, kinda interested to know ur setting

owh. guys, i cant past 3.1Ghz

i set ram timing 5-5-5-15 @ 1.8V @ 836MHz (stock speed 4-4-4-12) and vcore stock volt 1.325V @ 9x 345

this is first timer with quad proc. can guide me a lil bit.

i know nothing about adjust anything other than Mch, vcore, vDimm, cpu multiplier, FSB.

EIST and C1E disabled. others left auto.

thank in advance.

This post has been edited by atomik: Jun 17 2009, 07:29 AM


Attached thumbnail(s)

it failed because of ram timing?


Attached thumbnail(s)

yah. i mixed the ram. 1 stick of 1GB n 1 stick of 2GB. both timing 4-4-4-12 (stock) 800MHz.

This post has been edited by atomik: Jun 17 2009, 12:41 PM

ahaks, why dont tell me earlier. might try this night.

thanks guys, now achieve my expectation 3.2Ghz

will push more later.

This post has been edited by atomik: Jun 20 2009, 12:14 PM


Attached thumbnail(s)

dun worry. i got lot of time to tweak here n there.

patience is the key to success. am i right?

u mean going Fanless? right now using thermalright true 120 for cpu cooler.

i think P&P can help me a lil bit.

last night i try up the FSB about 5-8, and FSB strap to NB in AUTO, then ram running on 890MHz, after 14 miutes OCCT test, core 0 error, i edy try increase the Vcore n Vmch but still not solve the prob. is it my ram is the barrier?

356x9 - 364x9
vcore 1.39v
Vmch 1.22v
Vdimm 1.89v

3.2Ghz edy achived.

over 3.2Ghz cant go. blue screen if running the ram 870Mhz or more.

if running below 800MHz (736MHz), got error on OCCT test. no idea. just tested increase vcore, vmch, n vdimm kaw2 but issues still remain the same. i think the ram ler.

dont poison me ler. WC is away expensive n bomb my 4$$ . (but a good suggestion)

how to make the ram divider going 1:1? last time i oc'ed e8400, the ram automatically set to 1:1. only this time ii happen with 5:6.

(still noobs )

i think both u meaning this one? (the link below can story what is the optimal RAM perform at q6600)

http://www.memoryc.co.uk/pages/oc_guide_pg3.html

about change divider i use the article from the link below. its useful for me. n get better ram like gamers maniac said.

click me pls..

i try to adjust FSB strap to 400MHz and ram 724MHz. and edy get 1:1 divider.



Attached thumbnail(s)

nice oc u got there ibenq, (suppose call u ibenq or ur new name ar?)

DDR3 is the killer on this thingy. mind to tell me ur mobo ar? DDR3 so tempting nowadays.

@terryfoo

no need to buy the 8700 zalman unless u use for stock speed. i owned it b4 n really frustrating me. even core 2 duo it cant handle the heat. core 2 quad

how about the CCF or red scorpion? i heard the cooler is efficient tho.

@EricCYL

err, currently using the thermalright true 120.

i guess next month will looking new ram since i cant pass above 3.3Ghz.

try look at my worker thread 4, i done primetest 95 about 8 hours and xx minutes. then appears hardware failure detected. what does it means by

Fatal error rounding was 0.5 and expected less than 0.4

AFAIK primetest 95 running 7 hours consider pass right? (correct me if im wrong) noob


Attached thumbnail(s)

dunno la why its fail after 7 hours. but now testing for 3.4Ghz. hopefully pass the prime. just curious with my windows xp sp3 to use intel burn test. no 64 bit n no 4GB ram.

85c load n idle 52c. on prime n OCCT.

@vigilant
mind to show ur post like vcore. mch, VTT, mch ref, and so on.