forgot to mention bout my rig (mobo = Biostar TA690, =RAM Patriot PC6400 but tried @940Mhz o.k) , PSU=cooler master 430W. Might try pushing it higher but want to stress the cpu more to check stability . One thing was after 2500Mhz had to reduce Ram speed from DDR800 to DDR533 or else could not boot. Tried increasing DDR volt but unable to post. Last time had weird problem when cpu multi was at 10.5x .

what that wierd problem???

try to use the lowest divider that u can set and OC the proc to max to know it ability....

bro it can push higher??
i think it will reach limit and u cant get 3ghz rite??

if not try u would never know....
proc after some time burn in....
it can go more higher then usual....

want advise.
higher vcore that can set for brisby?

~xixo_12~

dont know ar...
it depends on ur proc...
need to try and check for error....

what i hear the hifgest Vcore for brisby to get 3.0ghz is 1.4v something....
there also higher vcore needed...

so it depends....

1.5 maybe
My setup 1.525 24/7

-pWs-

mine 1.5

270x10.5

wa...isnt that....abit high for brisby? =/

Asus announce that several mobo like my M2N32 Sli Deluxe and M2N-E can be used for AM2+ after BIOS update. I am aiming for Quad Core Phenom soon.

Mr_47, we have similair setup. I reach 2.83ghz stable. Quite hard to go up. Please advise how much vcore i need to put for 2.9-3.0. My current vcore is 1.46 (but i set 1.44).

Yeah, 3ghz fail orthos. So close to 3ghz, haha. Will try 1.425 or 1.45v next time.
No time to test cause need to use pc for assignments.

i thought phenom can be used already for AM2 mobo??only got few features not available??

edit:M2N32-SLI shouldn't be prob to reach 3.0Ghz i think as it can pump up higher Vdimm compared to M2N-E.maybe u should lower a bit ur HT multiplier??

This post has been edited by rainingzero: Sep 8 2007, 06:31 PM

haha.. told alredi.. same like me, a lot asinment to do.. lazy to othos.. better i do my asinment than looking at the GO..GO..GO.> and then STOPPING.. frust ...

---

Added on September 8, 2007, 8:33 pmur rig quite good.. why not lowering ur ram.. maybe can push until 4.0ghz

---

Added on September 8, 2007, 8:35 pmmaybe.. have to wait until i get the title milionaire..
will try.. bcoz u doesnt have any prob with 1.525

This post has been edited by xixo_12: Sep 8 2007, 08:35 PM

readlly , then asus got announce update more vdmim ? joke

for those who are waiting for phonemX4 or X2 , the faster day realese will be on end of the year or early of the next year ..

this maybe a noob question, so please bear with me

in biostar 690g bios, where to find fsb:dram divider?
i cant find it anywhere

i dont think u can find it anywhere, basically, divider means fsb:ram frequency. say.. 200fsb : DDR400 = 1:1 divider. 400fsb : DDR400 = 2:1 divider, keep in mind that DDR represents the effective clockspeed. Example, DDR2 667 is actually achieved by 333mhz X 2.

This post has been edited by AoiNatsume: Sep 9 2007, 03:46 AM

mana ada.. just find the (DDR400,DDR533,DDR667,DDR8000) changing option

~xixo_12~

there is schedule of fsb:ram devider at 1st post...u can refer to those....

juz got my brother a brisbane with biostar mobo..

manage to go up till 2.7Ghz with stock cooler

3600+ X2 Brisbane G1 | arc_archive | Biostar TF560 A2+ | Crucial 10th Ann 2x1GB PC5300 667Mhz| AMD Stock Cooler | 2700MHz





actually,i felt a bit diffrence when orthosing using AMD proc compare 2 intel...it seems much smoother and much faster to load program while orthosing.

thought to used this brisby rather than giving to my brother edi..and got him ANOTHER proc+mobo

its been a while ive dumped my amd and now i feel the difference!!

This post has been edited by arc_archive: Sep 9 2007, 08:59 PM

omg, 400 divider?
your crucial 10th is crying there
just kidding
have you try to push ur ram further?
i would say that it is very OCable
look at mine, the power of crucial 10th. havent fully utilise it yet


This post has been edited by dblooi: Sep 9 2007, 09:31 PM


Attached thumbnail(s)