What if i'm still under contract and move to other apartment that don't have TIME coverage? Will TIME charge me RM500 penalty? Thanks.

Hi guys,

Im on 500mbps plan and seeking suggestions on the right router since the plans have been upgraded.

Im using ASUS RT-N56U and my max speed is at 160mbps at most on my Android and my pc/iphone in my room max 60 mbps. On top of that im using 2 powerlines as the the wifi is very weak.

Hence, I need to upgrade my router to a better one and keen on Asus or perhaps a mesh wifi. If i do purchase a better router, do i need to search for cat 6 copper cable separately as the cables provided with router is not cat 6?

Thanks all

How's the performance for the powerline?

How fast is the speed ? I know expensive routers are the way to go but I have many walls in my home so even the most expensive wireless router will not give me the speeds I desire at the rooms located far away from the router. I'm using the Tenda AC 15 router - was good before - now with the 500 Mbps speed I can't achieve the published speed unless I'm very close to the router when on 5Ghz.

I suggest mesh wifi instead of powerline.

If it doesn't involve running cables then I'm ok - but need to figure out how it works for some places with no power adapter where I want to locate the module for the mesh wifi...

anyone can help to post out the ipv6 setting for dlink 850l ? I factory reset and did not copy the ipv6 setting . or advise how to set it back ? thanks

Ah, that would be about difficult.
Just leave IPv6 disabled. You don’t really need it.

my 100mbps package is still running at 94.4+- mbps after the upgrade

checked my selfcare portal it says i m on 500mbps

using tp link archer 1200. use cable also cannot hit 100mbps

called them to check they cannot figure out whats wrong too

so this ipv6 doesnt really matter ?with or without it ?

i also have this issue after upgrade to 500Mbps, after reset and reconfigure router only can get full speed

now using 1Gbps   

i also have this issue after upgrade to 500Mbps, after reset and reconfigure router only can get full speed

now using 1Gbps   

my router just newly configured.

let me try again when m home later

thanks for the tips bro

Hi bro, could you please let me know how you reconfigure your rOuter? Just reset to factory default settings and after that do we need to manually input user id or what for TIME settings? Thanks in advance

Hi. Which router that you're currently using?

You need to get the PPPoE details ready.
After you factory reset you need to key in your PPPoE details.

For example, ID: XXXX@timebb
I can guide you with the configuration.

Thanks.

Hi sir, thanks in advance, sorry my router is TP-Link AC1200 which is stock router from Time , and how to get my PPPoE ? Can just copy paste from my router before reset?

And I’m going to buy J5 USB3.0 to Gigabit ethernet for my macbook, has anyone here tried it? Max speed? Thanks in advance

Hi sir, thanks in advance, sorry my router is TP-Link AC1200 which is stock router from Time , and how to get my PPPoE ? Can just copy paste from my router before reset?

And I’m going to buy J5 USB3.0 to Gigabit ethernet for my macbook, has anyone here tried it? Max speed? Thanks in advance

Without is fine.