jjj2 any idea what is causing my connection to disconnect?

Done pppoe connection,after a while it will just hang. When i try to dial again it says password incorrect.

I have to keep resetting modem. Sometimes it work sometimes it doeant. Seem like my port is limited to 500mbps still? ( instead of 1gbps).

* got momentary reach 980mbps after that it just auto disconnect. Even succesaful login only 500mbps afterwards.

This post has been edited by beetch: Oct 7 2018, 10:01 PM

jjj2

Yes auto disconnect.

This is my "so called" 1gbps plan.

I am using asus rt ac5300 + tplink t9e. I dont think hardware is an issue? Maybe i should upgrade my pcie card to asus pce-ac88?

Both wifi and lan cable gets 600mbps only.

Impossibru.

Set QOS loh.

Already tried.

Its the same.

Is like the ISP clone my mac address or something and put a limit to it.

First when i get the 1gbps is very fast. Speedtest 980mbps. Then i tried DL 80gb of 4k movie to test the speed. Not 5 minutes later it disconnect. Cannot login for maybe half an hour then managed to login. Speedtest all become 500-600mbps ish. Once it hit 600mbps it will auto disconnect.

Weird stuff. Router seems to be ok. Router cpu utilization also very low.

This post has been edited by beetch: Oct 8 2018, 12:07 PM

I got my hardisk from them though. Order sunday got on tuesday.

Asus rtac5300

Those are limited to 2x2 mimo and only capable of 500mbps. As a matter of fact all phones are 500mbps limited to my knowledge.

U wanna 800mbps+ wireless u gotta look for 3x3 or 4x4 mimo. One good one is pce-ac88. Fastest wireless adapter in the world.

Which wifi adapter u using?

Doubt the iphone x can reach 1gbps speed. The mcbook though can.

Those wifi chip is built into laptop casing. Without those antenna like pcie cards reckon quite hard to reach 1gbps unless u next to it.

Either that or the router is not real 3x3 mimo. Not much exp with tplink 5400 to be honest but kinda surprisrd hw cheap it is.

Like that i think better use wire now.

Wait for ac802.11ax router release next few months.

Those new standard ax can 1gbps over wifi no problem but the product will only get popular next year.

Anyone use archer c5400 + asus pce-ac88 ?

Please report if wifi can do 800mbps

Iphone 600mbps? Impossibru.

520-550ish still believeable.

Upgrade ur T9E. it is not 4x4 mu-mimo so theorethically 450mbps is the max u can get (33% of total 1300mbps for 5ghz)

calvin871989 How is that ugreen cat7 cable?

Mine even worse. 932mbps on time server, other servers all 650mbps-ish.

My area must be congested as f.

I just read some of the comments for ugreen seller on cat7. It seems like got one guy say the cat7 cannot use for poe. That means the cat7 is not real copper cat7, is what we called CCA cable. The core is aluminium but clad with copper. No wonder so cheap and it is confirmed inferior compared to nornal full copper cat6 cable.

Haiz, i already bought 2 before reading the comment. Hopefully the 20m i ordered is not shitty. Should had paid a bit more to get real copper cat6 product or made my own.

Very hard to say. Aluminium is a cheaper material compared to copper. Therefore a lot of "china" product clad the aluminium with copper to reduce cost. Safety wise is a hazard as alumium melts easier than copper. Unfortunately the only way to tell this is to cut open the wires and do a burn test. Aluminium will just be like tin foil, once caught fire will wither and melt straight away.

American lan cable such as those commscope or german shneider is 100% copper.

Well, since i already bought 2 myself lets just hope it works and lasts.

Please google CCA lan cable. It will tell u more. It is cheap for a reason and maybe dangerous too. There are many inferior fake lan cables nowadays.

If use for ethernet cable should be ok i guess. Hopefully it delivers.

Yah but dont forget CCA cables are brittle. Bend extremely and it is likely the cable cannot be used anymore. If can use just use but dont expect it to last super long.