Hi guys, I just move to a new house. In this new house, each room has its own ethernet ports.

I want to connect my PC but it's not working. How do I activate them? Should i just contact TIME?

https://imgur.com/fFxcpe5
https://imgur.com/XvJNftK
https://imgur.com/KLmleCR

Have you tried connecting to another ports.
Might need to check one by one which one is through that port.
Check behind the Wall Port and check whether is there any cable behind wall port.
Some developers never put wire or connect the wire.

do I need to connect a cable from the modem to the switch?

Hi guys, I just move to a new house. In this new house, each room has its own ethernet ports.

I want to connect my PC but it's not working. How do I activate them? Should i just contact TIME?

https://imgur.com/fFxcpe5
https://imgur.com/XvJNftK
https://imgur.com/KLmleCR

Except for the cable from your modem to your switch, I don't see any other ethernet cable.

I think the right combination should be from the modem to the router and from the router to the switch (Modem > Router > Switch). From the switch each port in the room with ethernet port should be connected to that switch (Switch > Room with ethernet port). Only then can your PC or other gadget connect to internet using your room ethernet port.

The function of the router is obviously to dial in via PPOE through your modem while separating the internet connection (1) via the switch to all connecting LAN and (2) via its wifi to all connecting wifi devices.

Does that mean my main router should be placed in the networking box? Cuz it's currently in the living room

You need to place a switch at the place where all LAN cables from rooms are located.
From your router pull one LAN cable to your switch.

(if all LAN cables from room is coming near to your router, then you can place the switch there too)

https://imgur.com/KLmleCR

so that black thing isn't a switch? dang that sounds complicated, i think i'll just use ethernet cable from living room to bedroom at 3rd floor LOL

Hi, I having a issue on my home network here.
This problem has been persist for over half year now.

I got upgraded with Huawei Omnimesh wa8021v5 mesh WIFI half year ago, it is suppose to cover the WIFI blind spots in my home (apartment). The installer installed both mesh WIFI in different part of the house.

Router is TP-Link AC1350 EC230-G1 also provided by TIME.

The problem I am facing right now is, my phone unable to roam between mesh WIFI, meaning that when I go to certain part of the house although my phone indicated that my WIFI signal is connected and strong but I couldn't access to the internet until I toggle off and on the WIFI.
This is a known problem. Try placing the Mesh Nodes within line of sight, avoid L-corners if possible.

This problem happen on my phone and sometimes my android tablet, I have reset both my devices yet still the same problem.

May I know what's the reason?
And I also noticed that one of the SSID from the mesh WIFI said "5Ghz" but the network is "2.4Ghz" according to the WIFI analyzer app.
Probably your case the link between Node 1 & Node 2 is meshed with 2.4GHz band.

Hi guys, I just move to a new house. In this new house, each room has its own ethernet ports.

I want to connect my PC but it's not working. How do I activate them? Should i just contact TIME?

https://imgur.com/fFxcpe5
https://imgur.com/XvJNftK
https://imgur.com/KLmleCR

hi guys. appreciate your help.

i will end my time fiber by end of the year due to relocation. already submit the form needed via online. do i need to return any modem or etc to time fiber center?

ps : already beyond 24months contract period.

No need return at this moment of writing.

Thanks.

https://imgur.com/KLmleCR

so that black thing isn't a switch? dang that sounds complicated, i think i'll just use ethernet cable from living room to bedroom at 3rd floor LOL