Welcome Guest ( Log In | Register )

664 Pages « < 27 28 29 30 31 > » Bottom

Outline · [ Standard ] · Linear+

TIME [OFFICIAL] TIME Fibre Broadband™ v4, Experience the ONE TRUE 2Gbps

views
     
jjj2
post Oct 10 2018, 08:20 AM

Look at all my stars!!
*******
Senior Member
3,604 posts

Joined: Feb 2006
QUOTE(locoroco2 @ Oct 10 2018, 01:02 AM)
Need help on TIME fibre installation on cabling... my building comes with VDSL infrastructure, so to install TIME, TIME will need to pull a fiber optic cable through my main entrance, I understand that normally the technician will drill a hole at the entrance wall for the fiber goes through correct?

But I am not allowed to drill any hole (tenancy agreement) at the unit. Can I request the fiber optic to go through the gap at the bottom of the main door? the door gap here is about 6mm, would install cable trunking to protect it..
*
Yes you can request for that by understanding the risk of using this method.

Thanks.
jjj2
post Oct 10 2018, 08:26 AM

Look at all my stars!!
*******
Senior Member
3,604 posts

Joined: Feb 2006
QUOTE(irone @ Oct 10 2018, 06:33 AM)
Hi, how do I upgrade the firmware since there is no "firmware" in setting?

[attachmentid=10062433]

Thanks.
*
You may use this to update.
Archer1200GatewayIP/userRpm/firmwareUpgrade.htm

Eg : http://192.168.0.1/userRpm/firmwareUpgrade.htm
Latest TIME firmware,C1200v1_eu_time-up-boot-1.0.0 Build 20180502 rel.45702 (official)

Thanks.

This post has been edited by jjj2: Oct 10 2018, 08:26 AM
jjj2
post Oct 10 2018, 08:29 AM

Look at all my stars!!
*******
Senior Member
3,604 posts

Joined: Feb 2006
QUOTE(Karen1995 @ Oct 10 2018, 01:39 AM)
1.May I know the latest free router time giving better or  Mi Router 3G?
Performance wise on par. Signal penetration Mi Router 3G is slightly better.
2.My subscription auto upgraded to 1gb from 500mbps, does it means another 24-months contract locked? (Contract finished for 500mbps)
NO contract reset, your contract continues from previous package.
*
jjj2
post Oct 10 2018, 08:31 AM

Look at all my stars!!
*******
Senior Member
3,604 posts

Joined: Feb 2006
QUOTE(sparrowed @ Oct 9 2018, 10:51 PM)
does anyone knows how to login to the Huawei HG 8240H GPON ? my Time technician told me the port configured incorrectly, thats why im getting 100mbps despite upgraded to 500.
*
There's no need to configure on that. We only do certain config under special cases or non-home broadband case.
pskk
post Oct 10 2018, 08:36 AM

Getting Started
**
Junior Member
133 posts

Joined: Sep 2005


QUOTE(locoroco2 @ Oct 10 2018, 01:02 AM)
Need help on TIME fibre installation on cabling... my building comes with VDSL infrastructure, so to install TIME, TIME will need to pull a fiber optic cable through my main entrance, I understand that normally the technician will drill a hole at the entrance wall for the fiber goes through correct?

But I am not allowed to drill any hole (tenancy agreement) at the unit. Can I request the fiber optic to go through the gap at the bottom of the main door? the door gap here is about 6mm, would install cable trunking to protect it..
*
Mine goes through the bottom gap of my front door but the gap is approx 10mm.
So far i have had no issue for more than 4 years.
Jzon
post Oct 10 2018, 08:52 AM

New Member
*
Junior Member
10 posts

Joined: Mar 2012
Guys, question im using Asus RT-AC86U for the router and for my pc wifi adapter using Tplink Archer T9E.

I am only able to get a wifi speed of 400MBPS-450MBPS. Router is just beside the computer. If i use my iphone I am able to get up to 600MBP currently subscribe to 1GBPS. Is it normal for my pc to only get up to 400-450MBPS, I havent tried using cable yet.
Lord_Ashe
post Oct 10 2018, 09:07 AM

Old Treasure Hunter Sidekick
******
Senior Member
1,495 posts

Joined: Sep 2005
From: Damansara Perdana - KL


QUOTE(pskk @ Oct 10 2018, 08:36 AM)
Mine goes through the bottom gap of my front door but the gap is approx 10mm.
So far i have had no issue for more than 4 years.
*
ya it can be done, but make sure the cable is protected. Putus kalu, mahal to fix.

QUOTE(Jzon @ Oct 10 2018, 08:52 AM)
Guys, question im using Asus RT-AC86U for the router and for my pc wifi adapter using Tplink Archer T9E.

I am only able to get a wifi speed of 400MBPS-450MBPS. Router is just beside the computer. If i use my iphone I am able to get up to 600MBP currently subscribe to 1GBPS. Is it normal for my pc to only get up to 400-450MBPS, I havent tried using cable yet.
*
Sounds like you've maxed out your router's wifi speed. Test with direct cable connection.
Jzon
post Oct 10 2018, 09:20 AM

New Member
*
Junior Member
10 posts

Joined: Mar 2012
QUOTE(Proton2.0 @ Oct 10 2018, 09:12 AM)
Could it be your HDD bottleneck? Avg hdd throughput around 50MB/s, which is around 400Mbps. Try testing with a PC with SSD.
*
I am currently using SSD for my desktop. I might try using cable connection to isolate the issue.
fujkenasai
post Oct 10 2018, 09:27 AM

Regular
******
Senior Member
1,137 posts

Joined: Mar 2006
QUOTE(mds14 @ Oct 10 2018, 01:10 AM)
no wonder, if use ssd can get more speed. I use hdd only can get about 32MB/s only
*
That's the max speed a hdd can go...

Some says they need nvme for full utilization
locoroco2
post Oct 10 2018, 10:07 AM

Getting Started
**
Junior Member
257 posts

Joined: Aug 2009
QUOTE(Proton2.0 @ Oct 10 2018, 07:17 AM)
Your landlord don't allow? Maybe talk to him. You are not simply drilling anyhoies. One the cable is laid, future user of the place can use also. Anyway, the installer does a very good job, after drill, cover nicely at the corner. Put some paint on it and you won't notice unless you stare into the corner.
*
The unit here is furnished with wooden panel at the entrance wall inside out so I can understand the landlord try to avoid that now sweat.gif btw can you pls snap/share a photo of the drilled hole with cover provided by TIME? thanks in advance bro! notworthy.gif
locoroco2
post Oct 10 2018, 10:19 AM

Getting Started
**
Junior Member
257 posts

Joined: Aug 2009
QUOTE(stasio @ Oct 10 2018, 03:45 AM)
As you have VDSL infrastructure or copper phone line in apartment, installer will follow that same phone truncking to pull fiber in premise.
*
Thanks bro! thumbsup.gif I think if not mistaken the installer will follow the VDSL trunking up to my floor level then to my main entrance, after that will need to drill a hole or pull through the door bottom gap to enter the unit smile.gif

QUOTE(jjj2 @ Oct 10 2018, 08:20 AM)
Yes you can request for that by understanding the risk of using this method.
Thanks.
*
Noted thanks bro! thumbsup.gif

QUOTE(pskk @ Oct 10 2018, 08:36 AM)
Mine goes through the bottom gap of my front door but the gap is approx 10mm.
So far i have had no issue for more than 4 years.
*
Great sharing there bro! thumbup.gif are you using any special trunking system to protect the fibre optic cable at the bottom of the door?
SilentVampire
post Oct 10 2018, 10:20 AM

Networking Enthusiast
*******
Senior Member
5,714 posts

Joined: Mar 2007



QUOTE(Proton2.0 @ Oct 10 2018, 09:09 AM)
Say, i want to ask. Is there beamforming in the tplink AC1900? How do i enable this? Do i need to enable beamforming in my devices too to take advantage of it?
*
You don't need to enable anything. It is there by default. No, you do not need to enable beamforming in devices.
ryansxs
post Oct 10 2018, 10:37 AM

Look at all my stars!!
*******
Senior Member
2,377 posts

Joined: Dec 2005


QUOTE(HarrionX @ Oct 10 2018, 12:23 AM)
Speed got upgraded to 500Mbps, but still speed stuck at 100 or 120mbps only.

Thinking to downgrade.

It stated if downgrade within contract , "12/24 months contract reset"

Does that mean if I left 2 more month to contract end, then I downgrade, it will reset become 24 months back?
*
thats right. not worth to pay high, while speed suffers to break 150mbps number.
better to pay less for 100mbps. (which is good enough for most users)
beetch
post Oct 10 2018, 11:19 AM

Casual
***
Junior Member
429 posts

Joined: Jan 2003
QUOTE(Jzon @ Oct 10 2018, 08:52 AM)
Guys, question im using Asus RT-AC86U for the router and for my pc wifi adapter using Tplink Archer T9E.

I am only able to get a wifi speed of 400MBPS-450MBPS. Router is just beside the computer. If i use my iphone I am able to get up to 600MBP currently subscribe to 1GBPS. Is it normal for my pc to only get up to 400-450MBPS, I havent tried using cable yet.
*
Iphone 600mbps? Impossibru.

520-550ish still believeable.

Upgrade ur T9E. it is not 4x4 mu-mimo so theorethically 450mbps is the max u can get (33% of total 1300mbps for 5ghz)
Jzon
post Oct 10 2018, 11:24 AM

New Member
*
Junior Member
10 posts

Joined: Mar 2012
QUOTE(beetch @ Oct 10 2018, 11:19 AM)
Iphone 600mbps? Impossibru.

520-550ish still believeable.

Upgrade ur T9E. it is not 4x4 mu-mimo so theorethically 450mbps is the max u can get (33% of total 1300mbps for 5ghz)
*
Heres the screenshot i am able to achieve 600mbps for my iphone 8 plus

This post has been edited by Jzon: Oct 10 2018, 11:24 AM


Attached thumbnail(s)
Attached Image
gin&tonic
post Oct 10 2018, 11:37 AM

Look at all my stars!!
*******
Senior Member
4,874 posts

Joined: Sep 2011


QUOTE(Jzon @ Oct 10 2018, 11:24 AM)
Heres the screenshot i am able to achieve 600mbps for my iphone 8 plus
*
So powoar. Nice.
D-Zire
post Oct 10 2018, 11:39 AM

On my way
****
Senior Member
560 posts

Joined: Jul 2007
From: Pew Pew


Didnt get a response from Time FB messenger so I thought I will ask here.

I’m an existing (still under contract, 1 last month remaining) user for Time which has just been upgraded the speed from 100 to 500. So when I login to Selfcare page, I can see that I’m able to redeem a free router - TP-Link AC1200 but will have a contract renewal of 2 years. So my question is can I get the DLink router DIR-882 instead? I can top up the difference.
ryansxs
post Oct 10 2018, 11:54 AM

Look at all my stars!!
*******
Senior Member
2,377 posts

Joined: Dec 2005


QUOTE(D-Zire @ Oct 10 2018, 11:39 AM)
Didnt get a response from Time FB messenger so I thought I will ask here.

I’m an existing (still under contract, 1 last month remaining) user for Time which has just been upgraded the speed from 100 to 500. So when I login to Selfcare page, I can see that I’m able to redeem a free router - TP-Link AC1200 but will have a contract renewal of 2 years. So my question is can I get the DLink router DIR-882 instead? I can top up the difference.
*
i would suggest, better get a router yourself.
one good performing router is what you need.
Karen1995
post Oct 10 2018, 11:55 AM

Enthusiast
*****
Senior Member
704 posts

Joined: Aug 2016
QUOTE(jjj2 @ Oct 10 2018, 08:29 AM)

*
Apart from restart router, what else I need to do? because the speed remain the same even though my self care displayed 1GB subscription is active.

user posted image
XyDi
post Oct 10 2018, 11:55 AM

New Member
*
Junior Member
32 posts

Joined: Apr 2014


im switching from unifi to time. Need some advice from u guys. Will POWERLINE WiFi EXTENDER be suitable for condo? I want to install it specific to my gaming room.

664 Pages « < 27 28 29 30 31 > » Top
 

Change to:
| Lo-Fi Version
0.0201sec    0.37    6 queries    GZIP Disabled
Time is now: 3rd December 2025 - 03:33 AM