just changed to CM Hyper48 cooler. can do 2.8~3.2 with no prob (maybe more), but my ram holding me back. Can't get my ram stable even at a very relaxed timing.

+0.4vdimm 1:1 400FSB (DDR800) - 5-10-10-20 - UNSTABLE
1.32v core, the rest = stock voltage.

anymore tweaks i can do to increase the stability of my ram?

This post has been edited by BlackThyra87: Jan 18 2007, 11:42 PM

aiyo..if i knw u wan hyper 48 i shd hv sell to u cz i was thking gettin big typhoon VX wow...ddr800 @ 5-10-10-20 is super loose timing...perhaps too loose till not stable? try 5-5-5-15@2.1vdimm
im running 5-4-4-12 @ 2.0vdimm

guys, quick question..

if my proc(e6300) can run stable @ 3.2ghz (460x7), it should be able to run stable at say 475x6 (2.84ghz) rite?

or is there a fsb (not total speed) limit to each processor?

aiyo...u got hynix C4 ma... my ram chip unknown one : PROMOS 667 C5 0.09u 64Mx8 ETT ( reply by Mr.RAMGUY at Corsair forums)

anybody got solotion for my prob?

there is no FSB limit but only use lower multiplier to test ur mobo's MAX stable fsb. F9 bios can do 500MHz+ fsb with no prob HERE!

This post has been edited by BlackThyra87: Jan 19 2007, 12:10 AM

oh well.. i guess my mobo is the limiting factor then. I always thought that it was my processor.

My rams can run at 475 speeds (memtested them using the 4:5 divider) but my system wont be able to last in orthos for 5 seconds at 470x7 no matter how much vcore i pump in.

I guess I should just stop this obsession of crazy-overthetop overclocking and settle at where I am rite now. 430x7 @ 1.25v.

it might not fall into the real performance ram due to its timing, but dont forget that mine can reach very high fsb 1080fsb @ 2.2vdimm only and stable orthos.. maybe at loose timing but not many ram can reach 1000 even at loose timing
gskill hz also max out around 950fsb

This post has been edited by irenic: Jan 19 2007, 12:18 AM

Bro.. actually i have try 1.875 b4, wanna try hit 3.9Ghz from 3.7Ghz, when i set it, i use my side panel case to be my shield, scare it really burn the element flying then hit me... funny, it is.. ??!! We know it is dangerous, but we still wanna try it.... thats the humankind lah..

Wao.. so adventures, so willing to take risk u can join Extreme Overclockers club liao

Bro i got my typhoon liao.. must say its good in cooling the proc
Hehe.. very easy to mount on the mobo.. tot i would be hard and cant fit in my small case.

Wao.. now DS3 can hit 505Fsb
Hope 965 PT new BIOS realease faster la.. really cant wait..

This post has been edited by yehlai: Jan 19 2007, 01:17 AM

woah my +12v alwiz under 11.80 woh~ 11.65 and 11.58 heavy load. how eh? belum meletup eh

Time: 13.844 secs

CPU : C2D E6600
CPU clockspeed : 3.769GHz
RAM model : Corsair Dominator
RAM capacity : 1GB x2
RAM speed : 942MHz @ 4-4-4-12
RAM mode : Dual channel

http://forum.lowyat.net/index.php?act=Atta...=post&id=174021

if not terbabommm lucky for u...but its not gud for everyday usage...but if u want to take the risk...its ok then...anyway its ur own rig...

to support irenic..hehehe believe it..the Mushkin EM2 is really gud...im using it too..my overclock result 500Mhz DDR1000 with tight timing 4.0-5-4-10 @2.15v...if 400Mhz DDR800 it can run at 4.0-4-3-10 @1.95v same SPD timing as Mushkin XP2



anyways there is a new DFI Infinity P965 will be around..n its black...the review seems very tempting overclocked board armed with nice bios..



DFI Infinity P965 black mobo review

This post has been edited by flatfinger: Jan 19 2007, 04:49 PM

How much for tis board??

w00tss.. now that what i call overclocking

Yea nice result.. but also need to top up alot to get this board.
Moreover, cant just depend on mobo. To hit 3.7Ghz also require a hi-end HSF. (they use best of the best: Tuniq tower 120) Burn cash

This post has been edited by yehlai: Jan 19 2007, 04:12 PM

heehhe...nice black mobo...dfi bios always the best for overclocker...can wait how much RM??? for the board itself

wow..nice mobo
whn will it be out?

well it's not out yet so the price is not known, but Infinity series from DFI is unlikely to burn a hole in the wallet, well hopefully.

i think should be around RM600..hopefuly