basic electronics knowledge require
anyway i can made 1 for u
pencil mod will be easier

U can make for ppl??
But if pencil Mod, then how many shades should apply??
If too dark can cause over 'over voltage' ? like 2.6v then can cause burn chips ??
How u measure it?? u know how many shades needs in order to raise 0.1v ?

This post has been edited by yehlai: Jan 21 2007, 01:28 PM

pencil mod guide :
http://www.pcmoddingmy.com/e107_plugins/co...php?content.390

U selling your Abit AW9D-Max??
Wht cooling u use to reach 3.8Ghz ??

rlhc is a great modder.. even with simple cooling he can easily beat those with high end wc

huh?how

i mean his max clockspeed lah... eventhough he use simple cooling only but still can go very far..

yo guys. prime 95 stress test good?

use orthos it is specialized for dual core processor

dl it here :

http://sp2004.fre3.com/beta/orthos_exe_20060420.cab

thanks.

how long u guys usually do the stress test?
thinking to bump my fsb to 450mhz.

used blend test...around 6 hours plus should be ok...

Some screenies as promised. Guys can you add me to the owner list.

Pic ture is Here

guys am i overvolting my cpu? im running 1.40 now?

Do u really need 1.40 v to run at 3ghz?

Whatever it is, 1.4v is still within 10% of the default vcore. 1.55v would be overvolting your processor.

Note: I do not take any responsibility for any failure, explosion whatsoever coming from direct, indirect, perpendicular use of the rated vcore!

anyway, try playing around with your vcore, you 'should' be able to hit 3.0ghz with less than stock vcore. Mine is 3.0ghz @ 1.25v

Here's a good guide for overclocking e6300 (or any other conroe for that matter)
3.0 GHZ easy

thanks. i now downgrading my voltage to 1.3v

one last question guys.

im oc to 3.15ghz.
what you guys normally set the voltage.
i see many of u use it at 3.15ghz.

devilman, u need to oc step by step. increase ur fsb, then run orthos for 5-10mins, if no prob, increase fsb again, i say 5 fsb each, then run orthos again.. repeat until iorthos fail and then u need to increase ur vcore.

hehehe, okie. but what i want is to reach a min level.
3.15ghz is fast enough for me. only i think im over volating it at 1.275v.
thinking to decrease it. now running orthos fine, idle 38c max 52c.

Final result:
3.15ghz, 450mhz fsb x7.
ram 900mhz with 5-5-5-12 2.2v
idle 32c max load 53c.

Thanks guys for the help.



This post has been edited by DevilMan: Jan 21 2007, 07:25 PM