malaysia got gigabyte DS3 rev2.0 mah????????

This post has been edited by F@NT@sy_G@RRic: Nov 15 2006, 11:53 PM

i believe it's a yes. try to ask around in lowyat and the box for C1 and C2 for DS3 is different. one with intel logo, one without. C2 is with the logo. something like that. hehe... good luck

ds3 beta BIOS F8i is out...
I think it fixed the D9 issue

testing it right now

Evogenix

How was it? Any improvement?

hrmm... kinda curious here, how come no 680i fever going on in lyn? no one is getting any of them? and no one is doing bulk on this? the price for one is a bit more expensive from P5B-D if i'm not mistaken after converting from newegg. but it's relatively very new than P5B-D. just wondering how come no fuss about it in lyn.

btw, Bad Axe2 also not mush news on it. it's rather a good oc board. all focus on asus, abit and biostar? is it because of Malaysia market only bring in those stuff? getting sick of Malaysia IT market!!!

This post has been edited by Sanko: Nov 16 2006, 04:14 PM

bcoz it's very new ler.. still not available in lyp

btw i got ur receipt already

hmm... what i knew so far is, this f8i dont increase any proc oc-ing from previos f7/ f8a
I dont hv D9 ram, so no idea bout the D9 ram stablity part.
So, far my proc stable at stated in my siggy below. Hoping the final release can make it stable @ 500fsb


Evogenix

E6400@450FSB
DS3@F8I
Mushkin DDR2-667 2Gb@auto timing(2.1v)

cant run Orthos cpu stress even pump it with 1.6v, failed at 1 min sumthing.

Any advice?

more info needed
how about voltage? (vfsb, vMCH??)
try to fix the timing @ 5-5-5-15
memory divider set to 2.0

Evogenix

yea of coz 1:1 ratio and timing 5-5-5-15. vfsb & vmch both +0.2. for sure my ram was capable of 900fsb. maybe my proc limiting me. btw, how was the performance of the E6400 w26? i know w28 oc crazy....

your oc-ing not bad at all. 3.6GHz just nice for a e6400
try to max up the vFSB and vMCH
mine set max for both

Evogenix

Joining the C2D OC club...
Everything on stock: stock HSF, stock VCore, VDimm etc...

E6700 @ 3.15GHz @ 1.325V (stock)
315 x 10
5-5-5-15 512x2 Corsair DDR2 1.8V 1:1
P5B Deluxe
Orthos stable 6+ hrs
Max temp on stock HSF: 75C on CoreTemp

Tried but failed on 317 so 315 is the max I can go on stock.
Thinking of dropping multi before having to bump up voltage.
I seriously need to get a better HSF.

<Double-post; my bad>

This post has been edited by cks2k2: Nov 17 2006, 11:32 PM

Ya...75C on load is not cool at all. There are Scythe Infinity on sale from Rlhh...I am sure it will cool down at least 10C compare to stock.

new noob question here... how to change RAM timing for GA-965P-DS4...?

did any1 compare DS4 and DS3 for OC ar...? i wanna know the diff la...

DS4 got heatpipe design for chipset cooler while DS3 dun

ABIT IN9 32X MAX

anyone with nF680i Sli mobo yet? i cant find any review

btw seems like we dun have any abit user yet in this thread...i wonder how the AW9D MAX perform

i guess its time i retired from 'gila' pc / oc..
makes me broke~

This post has been edited by siauann: Nov 19 2006, 11:32 AM

Are U sure U google enough? Here is 1 review from VR-Zone about eVGA n680i http://sg.vr-zone.com/?i=4215. Sanko who got the mobo plan to sell it by the way...want to buy and make a review here?

U might want to check out the n680i chipset review. They compare a lot with intel P975 and P965. http://www.xbitlabs.com/articles/chipsets/...e-680i-sli.html

This post has been edited by mikelanding: Nov 19 2006, 12:19 PM

hehe... if no one wants it then i'll keep it. btw, if i'm not mistaken now only evga, striker etreme and bfg available for 680i. while the abit IN9 32X MAX will only hit retailers on january. and seems like czone now accepting pre order for the striker, RM1799!!!!! lol

This post has been edited by Sanko: Nov 19 2006, 05:39 PM