Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits

views
     
Evogenix
post Nov 16 2006, 10:41 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
ds3 beta BIOS F8i is out...
I think it fixed the D9 issue

testing it right now tongue.gif

Evogenix
Evogenix
post Nov 16 2006, 05:34 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(tAmp0i @ Nov 16 2006, 11:48 AM)
How was it? Any improvement? rolleyes.gif
*
hmm... what i knew so far is, this f8i dont increase any proc oc-ing from previos f7/ f8a
I dont hv D9 ram, so no idea bout the D9 ram stablity part.
So, far my proc stable at stated in my siggy below. Hoping the final release can make it stable @ 500fsb laugh.gif


Evogenix
Evogenix
post Nov 17 2006, 10:03 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(cyberion86 @ Nov 17 2006, 09:58 AM)
E6400@450FSB
DS3@F8I
Mushkin DDR2-667 2Gb@auto timing(2.1v)

cant run Orthos cpu stress even pump it with 1.6v, failed at 1 min sumthing.

Any advice?
*
more info needed
how about voltage? (vfsb, vMCH??)
try to fix the timing @ 5-5-5-15
memory divider set to 2.0

Evogenix
Evogenix
post Nov 17 2006, 12:07 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(cyberion86 @ Nov 17 2006, 11:43 AM)
yea of coz 1:1 ratio and timing 5-5-5-15.  vfsb & vmch both +0.2. for sure my ram was capable of 900fsb. maybe my proc limiting me. btw, how was the performance of the E6400 w26? i know w28 oc crazy....
*
your oc-ing not bad at all. 3.6GHz just nice for a e6400
try to max up the vFSB and vMCH
mine set max for both

Evogenix
Evogenix
post Nov 22 2006, 01:23 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(yehlai @ Nov 21 2006, 08:49 PM)
Sorry guys OFF TOPIC.
OC means warranty void for proc and mobo??
*
if follow by the rules, yes! warranty will be voided.
but if no burn mark on the board, you might still able to claim for warranty laugh.gif

Evogenix
Evogenix
post Nov 22 2006, 01:24 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
i believed there will be "low-end" quad-core series by early of next year right? brows.gif

Evogenix
Evogenix
post Dec 12 2006, 03:31 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
Announcement to ds3 user, F8j BIOS is out

Credit to bingo13 @ XS
http://rapidshare.com/files/7130218/965pds3f8janandtech.zip

Evogenix
Evogenix
post Dec 12 2006, 04:45 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 03:32 PM)
waz the changes made?
*
I'm using it right now.
din notice any changes/ oc-ing improvment from previous F8i

ps : sum1 just killed his board on this F8j BIOS, use it on your own risk

Evogenix

This post has been edited by Evogenix: Dec 12 2006, 04:50 PM
Evogenix
post Dec 12 2006, 07:38 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 05:26 PM)
if i were you, i rather wait release from gigabyte website then risking to kill my own mobo without knowing what this do
*
thats what we called "fun" with oc-ing - to test out with the Betas. If everytime waiting fot the final release, no syok anymore la... laugh.gif

QUOTE(gengstapo @ Dec 12 2006, 05:30 PM)
nahh.. even currently im using F8i

wanna c if i able to raise my speed  doh.gif  doh.gif
*
Bro, Good luck for ya... Mine still stucked at 499fsb with the F8j sweat.gif

QUOTE(deric88 @ Dec 12 2006, 07:26 PM)
i just need explanation on those +0.1v dimm,pcie,fsb,mch stuff... waz tht?
will it dmg my components etc etc....
*
its +0.1v to your default voltage. For vdimm, the default is 1.8v. Max up vpcie, vfsb and vmch wont kill you board if u got proper cooling, I max up everything, and its running rox stable after months of folding thumbup.gif

Evogenix
Evogenix
post Dec 12 2006, 08:01 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 07:51 PM)
easy for you to say, you are water cooled....
*
its nothing to do with the "water" or "ln2" cooled. You should able to watch up the temp from time to time when oc-ing even on air. I used xp120 before switch into water, setting still da same thumbup.gif thumbup.gif

Evogenix

This post has been edited by Evogenix: Dec 12 2006, 08:01 PM
Evogenix
post Dec 12 2006, 09:09 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 08:49 PM)
waz mch?
max u mean put to maximum?
*
max = highest value available lor...
max for vmch is +0.3 which equal to around 1.6v. I use MM to check onboard, the reading around 1.55-1.58v lik that

Evogenix
Evogenix
post Dec 12 2006, 09:44 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 09:12 PM)
is 65C 100%orthos considered hot
*
consider ok lor... mine arond that temp as well...
remember this, you wont on Orthos 24/7, so normal usage will around 52-58 lik that nia smile.gif

QUOTE(yehlai @ Dec 12 2006, 09:31 PM)
@Evogenix
I cant find new BIOS for PS3 at Xtremesystem.
Cant even find where to d/L BIOS for Gigabyte mobo.
Can u gimme some hint please??
*
PS3? is it S3? not all board got Betas BIOS, I saw got DS3, DS4, and DQ6(if not mistaken) only
Normally d betas wont post up on the official GGB website

Evogenix
Evogenix
post Dec 12 2006, 10:04 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(deric88 @ Dec 12 2006, 09:50 PM)
folding also something like orthos what? also 100%
how to play with ram timing?
*
oh ya.. just saw your lil folding tag beside laugh.gif
folding is loaded @ 100%, but the temp will 3-4C lesser than Orthos.

ram timing arr.. just play around with 4/5-4/5-4/5-x, find the most stable setting for your self will do. If not stable, lossen the timing more.

Evogenix
Evogenix
post Dec 12 2006, 10:45 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(yehlai @ Dec 12 2006, 10:34 PM)
Dont need to run so tight if run 24/7, CL-5 is good enough
@Evogenix
u think porc week will affect o'c result a lot??
*
personal opinion. Nope.
I saw a lot of oc-ed results from the same weeks/batches. But, the results seem kinda not consistant at all.
Some ppl just believe into those weeks theories. No comment on that. All based on your self.

Normally, e6300 can reach min of 3.0GHz with closing eyes. If wanna oc above of that, need to see how good is your proc can be oc-ed. Sometime, vCore must applied to increase the oc-ing as well.

Evogenix
Evogenix
post Dec 12 2006, 11:12 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(yehlai @ Dec 12 2006, 10:55 PM)
Ya mine is over 3Ghz (can see my sign).. after reach tht clock speed add vCore or vFSB/vMCH also no use. So frustrated.. but nothing more i can do.
If E6400 i think have higher potential to hit 3.6Ghz.
*
yes, got a large percentage can reach 3.5GHz above with e6400
But, if wanna get e6400, rather go for e6600 with the extra caches.

Every cent that spent on that extra caches are worth it.

Evogenix
Evogenix
post Dec 15 2006, 08:50 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(rlhc17 @ Dec 15 2006, 02:06 AM)
yup,the best p965 mobo cheap & very OC-able thumbup.gif 
mine doing ddr1200 with 2.35vdimm mod
*
omg, thats insane clocking on your ram... Nice result!

Evogenix
Evogenix
post Dec 17 2006, 01:39 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
» Click to show Spoiler - click again to hide... «


Here some results to heat everyone up tongue.gif
playing with my 24/7 folding setting

Evogenix
Evogenix
post Dec 17 2006, 10:57 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
found this in my screenies collection
laugh.gif laugh.gif laugh.gif
» Click to show Spoiler - click again to hide... «


Evogenix
« Next Oldest · Overclockers United · Next Newest »
 

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0447sec    0.59    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 09:46 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.