I see, thank you bro. I think I can find the RT-N14UHP locally around Kota Bharu. Hopefully it'll work fine and better.

changed my dir615 router to a new router which is DLink L7-N-R2000. My 30mbps Unifi seems to only get a constant 20Mbps, sometimes 15, after using this L7 router. Is it because of the router?

obviously.stock routers are pretty bad

insane packet loss while playing Dota 2 using Unifi30

With dir615 i can get 30mbps.. is there any setting that i missed on the new router

So i guess no difference the VIP30 and 50 then with the same errors keep popping up and speeds less than 80% capacity.

Not really. I for one doesn't have that problem or any problem with my unifi 50. Even both of and android app store working no problem. Currently using unifi 50 with mikrotik router

lan cable still provides the best performance and stability

Have you guys tried reporting the issue to http://www.complaint.cfm.org.my/ ?

also anyone working for tmnut can share whether they are working on this routing issue, and when can we expect a fix ?

it's just nearly impossible to play diablo 3. the lag just kills me even though i try walk out of molten on floor, but due to banding and time lag 5-10 seconds at times, i just can't avoid when creeps explode or theres arcane or whatever.

i cannot recommend playing hardcore until this issue is fixed.

before this issue, i use to get a flat 200ms which worked fine. but now latency fluctuates when stable as 250-350ms, and will then go as high as 600-800 and maybe even 1000ms

Peak 2000. Most of the time 1300-1500.

Are you using the stock router or changed/upgraded?

Not yet.

Changed my old router to be an access point.

me too

Anyone here got offer for Unifi 30mbps with Jumbo pack for RM 219 ?

I guess RM219 before gst? Then it's RM10 less

refer to my post #1863

seems that tplink router got issue with hypptv signal.
anyŵay, i just use tm supplied router for the time being.

updating the driver doesn't solve it in my case.

TM UniFi 30 Mbps speed test

Router: Asus RT-N12HP
Connection type: VDSL2
Crowded environment in condo, many neighboring wireless APs.

For this who keep complaining about poor speeds, if you are using wireless, please try to do speed test using cable connection.

This post has been edited by jolmy: Sep 13 2015, 04:55 PM


Attached thumbnail(s)

Ping seems a bit on the high side. Ethernet should be less than 10ms.

For users using VDSL2 (Fiber to building, then copper to BTU), the ping of 30ms to 50ms is normal.