C2D E6400
CORSAIR XMS6400 CL44412
AQUAEXTREME MCP05 WATER BLOCK
JingTing Forcetake Full Copper Chipset Cooler
3.7G at watercooling.test
This post has been edited by kvmcom: Jan 24 2007, 10:45 PM
BIOSTAR TFOFCE 965PT/DLX Disscussion
|
|
 Sep 13 2006, 12:11 AM, updated 19y ago
Show posts by this member only | Post
#1
|
 
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI 
|
BIOSTAR TFOFCE 965 DLX BIOS 0803
C2D E6400 CORSAIR XMS6400 CL44412 AQUAEXTREME MCP05 WATER BLOCK JingTing Forcetake Full Copper Chipset Cooler 3.7G at watercooling.test This post has been edited by kvmcom: Jan 24 2007, 10:45 PM |
Quote|
|
|
|
|
Sep 13 2006, 12:19 AM
Show posts by this member only | Post
#2
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
3.7G 1.7vcove at full load with JingTing Forcetake Full Copper Chipset Cooler
48c w/o 50c JingTing Forcetake intel 965 chipset heat together cpu ...  This post has been edited by kvmcom: Sep 13 2006, 12:20 AM |
|
|
Sep 13 2006, 12:25 AM
Show posts by this member only | Post
#3
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
1.7Vcore????
 Next time pls include Core Temp screenshot too... This post has been edited by pcmoddingmy: Sep 13 2006, 12:26 AM |
|
|
Sep 13 2006, 12:52 AM
Show posts by this member only | Post
#4
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(pcmoddingmy @ Sep 13 2006, 12:25 AM) 1.7Vcore???? this isNext time pls include Core Temp screenshot too...  Attached thumbnail(s) 
|
|
|
Sep 13 2006, 01:26 AM
Show posts by this member only | Post
#5
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Dude... this is Core Temp
|
|
|
Sep 13 2006, 01:50 AM
Show posts by this member only | Post
#6
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(pcmoddingmy @ Sep 13 2006, 01:26 AM) hot lah ???Attached thumbnail(s) 
|
|
|
|
|
|
Sep 13 2006, 02:11 AM
Show posts by this member only | Post
#7
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Yeah... it should be correct
 Core Temp is written based on Intel's TAT tool. So, it is more accurate. I'm sure if you run Prime, your CPU @1.7V will go beyond 70C... even water-cooled. This post has been edited by pcmoddingmy: Sep 13 2006, 02:11 AM |
|
|
Sep 13 2006, 02:28 AM
Show posts by this member only | Post
#8
|
Senior Member
2,295 posts Joined: Jan 2005 From: Penang  
|
ya core temp are more accurate for k8 and core duo... but how bout core temp reading in opteron? i think opteron also is k8, kinda noob question.. hehe
|
|
|
Sep 13 2006, 02:34 AM
Show posts by this member only | Post
#9
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(lichyetan @ Sep 13 2006, 02:28 AM) ya core temp are more accurate for k8 and core duo... but how bout core temp reading in opteron? i think opteron also is k8, kinda noob question.. hehe I think as long as it's Rev F, it's accurate. In other words, as long as the program loads. Rev E won't work with the program i think. |
|
|
Sep 13 2006, 02:43 AM
|
Junior Member
53 posts Joined: Oct 2004
|
nice oc kvmcom, an allendale on that board can really go!
i've seen the board push past 500mhz fsb using an E6300, good stuff. btw, where did you buy that board and how much? i'm looking around for it to upgrade soon |
|
|
Sep 13 2006, 04:59 AM
|
All Stars
10,688 posts Joined: Jan 2005
|
but 1.7vcore..
 u really hardcore thanks 4 sharing |
|
|
Sep 13 2006, 09:13 AM
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh 
|
TikeE, someone selling in at garage sales for RM480
 |
|
|
Sep 13 2006, 01:31 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
value for money mobo
who wtb pls let me know i got 1 extra wts ! hehe............... This post has been edited by kvmcom: Sep 13 2006, 02:10 PM |
|
|
|
|
|
Sep 13 2006, 01:39 PM
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
this mobo had no issue oc my e66oo & 7900gt to the maxxxx........
This post has been edited by rlhc17: Sep 13 2006, 02:01 PM Attached thumbnail(s) 
|
|
|
Sep 13 2006, 03:42 PM
|
|
Senior Member
5,341 posts Joined: Jan 2003
|
Very nice o/cing...The hardwarezone's review only max at 360FSB while your can do better than their one...
|
|
|
Sep 14 2006, 12:51 AM
|
Junior Member
435 posts Joined: Aug 2005 From: J.B / SG 
|
Biostar TForce got P965 Deluxe n non Deluxe....
now m'sia juz availible the Deluxe version... btw the non Deluxe like not got different with deluxe.... |
|
|
Sep 14 2006, 01:57 AM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
E6300 @ 3.3GHz 472FSB on TForce P965 Deluxe:
 |
|
|
Sep 14 2006, 08:40 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(pcmoddingmy @ Sep 14 2006, 01:57 AM) E6300 @ 3.3GHz 472FSB on TForce P965 Deluxe: hi there, may i know wat RAMs u use??[user send image] |
|
|
Sep 14 2006, 09:41 AM
|
|
Senior Member
4,350 posts Joined: Sep 2005
|
QUOTE(raymond5105 @ Sep 13 2006, 03:42 PM) Very nice o/cing...The hardwarezone's review only max at 360FSB while your can do better than their one... I think the earlier batch had QC problems. Just like the Hardware Zone review, I couldn't OC mine even over 300fsb. Mine came with the July Bios and even after updating to the latest Bios still can't OC to above 300fsb. Tried all sort of conservative timings, still unsucessful. Keep resetting and power off if I try 350fsb. Most of the time will hang completely and have to clear the CMOS and try again. The shop where I bought last week must have been an old batch. I should have suspected something amiss when they only had one for sale. They caught a waterfish here, hehe. Anyone wants to buy a Biostar T965 Deluxe motherboard, only 1 week old This post has been edited by Ngto: Sep 14 2006, 09:44 AM |
|
|
Sep 14 2006, 09:56 AM
|
|
Senior Member
5,341 posts Joined: Jan 2003
|
QUOTE(Ngto @ Sep 14 2006, 09:41 AM) I think the earlier batch had QC problems. So bad?Even can't reach 300FSB?Then what is the FSB are you on now?29x FSB?Just like the Hardware Zone review, I couldn't OC mine even over 300fsb. Mine came with the July Bios and even after updating to the latest Bios still can't OC to above 300fsb. Tried all sort of conservative timings, still unsucessful. Keep resetting and power off if I try 350fsb. Most of the time will hang completely and have to clear the CMOS and try again. The shop where I bought last week must have been an old batch. I should have suspected something amiss when they only had one for sale. They caught a waterfish here, hehe. Anyone wants to buy a Biostar T965 Deluxe motherboard, only 1 week old |
|
|
Sep 14 2006, 10:21 AM
|
|
Senior Member
4,350 posts Joined: Sep 2005
|
QUOTE(raymond5105 @ Sep 14 2006, 09:56 AM) So bad?Even can't reach 300FSB?Then what is the FSB are you on now?29x FSB? 300fsb can. Above that big problem. But haven't installed anything yet, not even Windows, because still busy trying to solve the OC problem at Bios first.This post has been edited by Ngto: Sep 14 2006, 10:21 AM |
|
|
Sep 14 2006, 11:38 AM
|
|
Senior Member
5,341 posts Joined: Jan 2003
|
QUOTE(Ngto @ Sep 14 2006, 10:21 AM) 300fsb can. Above that big problem. But haven't installed anything yet, not even Windows, because still busy trying to solve the OC problem at Bios first. Maybe you can try on finish installing Windows first then only starts o/cing... |
|
|
Sep 14 2006, 01:17 PM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(gengstapo @ Sep 14 2006, 08:40 AM) hi there, may i know wat RAMs u use?? OCZ PC2-8000 Ti Alpha VX2 2x1GB CL4-4-4  RAM is not an issue because it was running at 472MHz only. My RAMs are rated to run at 500MHz CL4. |
|
|
Sep 14 2006, 01:48 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(pcmoddingmy @ Sep 14 2006, 01:17 PM) OCZ PC2-8000 Ti Alpha VX2 2x1GB CL4-4-4 sure no issue since u using ddr800.. hurmm wonder how far can do wif value RAMs model RAM is not an issue because it was running at 472MHz only. My RAMs are rated to run at 500MHz CL4.   |
|
|
Sep 16 2006, 12:47 AM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
new e66 conroe test in biostar t965 dlx....
1.e66 week 26 2.xp90+ 9+12cm nmb fan 3.corsair 667 cl4 pi1m test...............  |
|
|
Sep 16 2006, 06:36 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
max bootable to winxp using Biostar P965 Deluxe
Attached thumbnail(s) 
|
|
|
Sep 16 2006, 10:01 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
-- OFFTOPIC --
wher can i get this kinda Biostar TForce 965 Deluxe at LYP?? thanks |
|
|
Sep 16 2006, 10:25 PM
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(gengstapo @ Sep 16 2006, 10:01 PM) -- OFFTOPIC -- I only know ATE is selling biostar mobos. Maybe u phone them to confirm?wher can i get this kinda Biostar TForce 965 Deluxe at LYP?? thanks |
|
|
Sep 16 2006, 11:30 PM
|
|
Senior Member
4,350 posts Joined: Sep 2005
|
QUOTE(gengstapo @ Sep 16 2006, 10:01 PM) -- OFFTOPIC -- I sell you mine cheap, want? wher can i get this kinda Biostar TForce 965 Deluxe at LYP?? thanks |
|
|
Sep 17 2006, 03:06 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
Testing Biostar w/ati x1950xtx on stock
Attached thumbnail(s) 
|
|
|
Sep 17 2006, 04:21 PM
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya 
|
biostar is the cheapest but the best board i've test so far!
unless u r concern bout on board firewire, dual lan, 8 phase , dual pci-e slots, u wont regret buying this biostar .. |
|
|
Sep 17 2006, 04:53 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(irenic @ Sep 17 2006, 04:21 PM) biostar is the cheapest but the best board i've test so far! cheapest but quite oc-able unless u r concern bout on board firewire, dual lan, 8 phase , dual pci-e slots, u wont regret buying this biostar .. |
|
|
Sep 18 2006, 06:08 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(irenic @ Sep 17 2006, 04:21 PM) biostar is the cheapest but the best board i've test so far! unless u r concern bout on board firewire, dual lan, 8 phase , dual pci-e slots, u wont regret buying this biostar .. QUOTE(kvmcom @ Sep 17 2006, 04:53 PM) cheapest but quite oc-able |
|
|
Sep 18 2006, 07:40 PM
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
sorry,forgot to open one more cpuz for mobo details
Attached thumbnail(s) 
|
|
|
Sep 18 2006, 07:48 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(coolice @ Sep 18 2006, 07:40 PM) sorry,forgot to open one more cpuz for mobo details hello bro,welcome to the Biostar Club  |
|
|
Sep 18 2006, 07:52 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
waaaa.. i want biostar.. i want it
btw, nice OC there  |
|
|
Sep 19 2006, 09:00 AM
|
Junior Member
208 posts Joined: Jun 2006 From: Penang
|
sorry out of topic. i'm looking for brand new BIOSTAR TFOFCE 965 DLX pls pm me....
|
|
|
Sep 19 2006, 12:55 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
brand new ask shop lah...
hehe |
|
|
Sep 19 2006, 01:12 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(irenic @ Sep 19 2006, 12:55 PM) brand new ask shop lah... i'm selling ma........ hehe |
|
|
Sep 20 2006, 12:32 AM
|
|
Senior Member
808 posts Joined: Jan 2003
|
With the latest bios, what is the Vdimm range of this mobo? And is it able to downclock the multiplier?
|
|
|
Sep 20 2006, 01:21 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(parsona @ Sep 20 2006, 12:32 AM) With the latest bios, what is the Vdimm range of this mobo? And is it able to downclock the multiplier? max vdimm 2.2v only  still can't downclock multiplier |
|
|
Sep 20 2006, 01:48 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
got latest bios ar? :-/
|
|
|
Sep 20 2006, 02:33 AM
|
Senior Member
912 posts Joined: Jun 2005 From: Cyber-LaLa
|
last few days i want to buy this mobo but that kdai man told me this mobo not so good enuff...nway that time less of review of this mobo.but now it proven
|
|
|
Sep 20 2006, 03:36 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
proven what? :-"
|
|
|
Sep 20 2006, 03:44 AM
|
|
Senior Member
912 posts Joined: Jun 2005 From: Cyber-LaLa
|
QUOTE(irenic @ Sep 20 2006, 03:36 AM) proven what? :-" proven it's the budget mobo that good in OC la geng..last time u have one biostar aite?....still using it?or sold alredy? |
|
|
Sep 20 2006, 09:56 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
biostar with e66 1.68vcore easy go 400x9 new t/t big ty vx temps .......
This post has been edited by kvmcom: Sep 20 2006, 09:59 PM Attached thumbnail(s) 
|
|
|
Sep 20 2006, 10:27 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
e66 put 1.8 vcore at bios full load with t/t vx hsf only 72c....
Attached thumbnail(s) 
|
|
|
Sep 20 2006, 11:19 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
1.8vcore
 i suggest u to try run prime n see ur coretemp temp after 10mins  |
|
|
Sep 20 2006, 11:36 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(irenic @ Sep 20 2006, 11:19 PM) 1.8vcore just testing only now down back 1.68 haha i suggest u to try run prime n see ur coretemp temp after 10mins if long time use i thing send rma ald...now nomal use 1.68 3.3g fast ald Attached thumbnail(s) 
|
|
|
Sep 20 2006, 11:47 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
latest bios : http://www.lejabeach.com/Biostar/p965deluxe/p965deluxe.html
calling irenic & kvmcom to test 1st haha......... |
|
|
Sep 21 2006, 12:19 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
haha kvmcom 1st lah.. he is hardcore!
|
|
|
Sep 21 2006, 12:21 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(irenic @ Sep 21 2006, 12:19 AM) haha kvmcom 1st lah.. he is hardcore! not hardcore but gila only......... |
|
|
Sep 21 2006, 12:28 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
just flashed it..no more nb/sb volt but mch volt,range from 1.25v~1.55v
max fsb range increased to 600 |
|
|
Sep 21 2006, 12:50 AM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(coolice @ Sep 21 2006, 12:28 AM) just flashed it..no more nb/sb volt but mch volt,range from 1.25v~1.55v no good bios cant boot at 350x9 flash back 0803...max fsb range increased to 600 |
|
|
Sep 21 2006, 12:51 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
how bout vdimm?
|
|
|
Sep 21 2006, 12:52 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(irenic @ Sep 21 2006, 12:51 AM) how bout vdimm? any cpu multiplier ? |
|
|
Sep 21 2006, 12:53 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(kvmcom @ Sep 21 2006, 12:50 AM) no good bios cant boot at 350x9 flash back 0803... not sure,did u try 400 fsb?just now i primed 452fsb for 2hrs++ just now w/o hang using stilt modded bios,but hang after few minutes with this bios |
|
|
Sep 21 2006, 12:54 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(irenic @ Sep 21 2006, 12:51 AM) how bout vdimm? same QUOTE(rlhc17 @ Sep 21 2006, 12:52 AM) any cpu multiplier ? is there such function for conroe except x6800?  |
|
|
Sep 21 2006, 01:03 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
yes! asus n gigabyte board does have cpu multiplier unlocked downward for us who are using el cheapo allendale and conroe
|
|
|
Sep 21 2006, 08:46 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
i hope they come out the bios with fixed 4:5 divier cant boot prob..
|
|
|
Sep 21 2006, 02:01 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
even asus p5b deluxe also has problem with 4:5 divider.. maybe the problem comes from the chipset..
|
|
|
Sep 25 2006, 09:43 PM
|
|
Senior Member
737 posts Joined: Oct 2005
|
p965 deluxe vmod from The Stilt XS..
 |
|
|
Sep 30 2006, 10:31 AM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Baok, I booted up at 472MHz FSB direct from BIOS. Although ClockGen worked for me, it didn't help much because my CPU maxed out at 3.3GHz.
|
|
|
Oct 4 2006, 04:35 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
good mobo not problem using 2x1gb d9 chips
Attached thumbnail(s) 
|
|
|
Oct 5 2006, 05:35 PM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Knocky knocky!
Any TForce P965 DLX users here seeking for simple pencil VDIMM mod? I have a working pencil VDIMM mod for this board....  |
|
|
Oct 5 2006, 06:24 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(pcmoddingmy @ Oct 5 2006, 05:35 PM) Knocky knocky! pls post here......... Any TForce P965 DLX users here seeking for simple pencil VDIMM mod? I have a working pencil VDIMM mod for this board.... thx |
|
|
Oct 6 2006, 07:03 AM
|
Junior Member
500 posts Joined: Sep 2005 From: Taiping/Perak
|
Any Idea....whick ram do best overclock at T-Force 965??
|
|
|
Oct 7 2006, 02:17 PM
|
Senior Member
1,476 posts Joined: Jan 2003 From: Hong Kong
|
Testbed:
Intel Core2 Duo E6600 L626 A479 @ 1.325v Vcore BIOS set Biostar T965 Deluxe date 03/08/2006 4x 512MB Hynix DDR2 800 @ 1000MHz 2:3 CL5-5-5-15 1.8v Palit Sonic Geforce 7300GS non-oc 256MB GDDR3 Enlight 420W True Powder PSU rclxub.gif Intel Stock 0.2A Heatsink Fan for LGA775 C2D FSB Voltage 1.2v MCH Voltage 1.5v EIST and Fan speed control all disabled. All voltage running at stock setting only, very satisfied !!!!!!!  3.0GHz (9x 334MHz) on air in panel closed casing. Running SP2004 Stress CPU x2 passed 8 hours already. Max load temp is quite high cos the Intel 0.2A cpu fan is not powerful For the photos of these toys please downlaod here: http://kcbox.net/my/Nabeh.zip Attached thumbnail(s) 
|
|
|
Oct 7 2006, 04:20 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
is there any diff between 965pt and p965 deluxe beside southbridge and lesser 2 sata ports in 965pt?
|
|
|
Oct 14 2006, 10:53 PM
|
Senior Member
1,436 posts Joined: Mar 2005
|
more cheers for Biostar user. check it out. 5.1ghz on cascade
http://www.xtremesystems.org/forums/showthread.php?t=119383 |
|
|
Dec 15 2006, 10:01 AM
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(coolice @ Oct 7 2006, 04:20 PM) is there any diff between 965pt and p965 deluxe beside southbridge and lesser 2 sata ports in 965pt? dunt thing so...i think the PT is the final/stable version of this mobo...its oso actually same as Albatron PXP965...well not very sure |
|
|
Dec 15 2006, 11:24 PM
|
|
Junior Member
85 posts Joined: Dec 2006
|
my testing on BIOSTAR 965PT
  |
|
|
Dec 16 2006, 01:43 AM
|
|
Senior Member
780 posts Joined: Aug 2006
|
QUOTE(Lodewijk @ Dec 15 2006, 11:24 PM) my testing on BIOSTAR 965PT juz wonder wat cooling system using.....anyway it eally impressed...good |
|
|
Dec 16 2006, 06:53 PM
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
-- Wrong Post--
This post has been edited by yehlai: Dec 16 2006, 08:51 PM |
|
|
Dec 19 2006, 10:39 PM
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
so biostar 965pt better than ds3?... hmmm interesting mobo wit quite good price..
|
|
|
Dec 20 2006, 08:49 AM
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
I m just found this thread.. !! My TForce 965PT
I not sure is that my Atrix T500 and Cheap Air Cooler stop me geting higher........ 
|
|
|
Dec 20 2006, 10:01 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
searching for new/latest bios for 965PT...i found this one
Biostar bios Link Update Date 2006/12/15 Size 432KB Download Ip96a921bs.exe Description Resolve POST problem with Nvidia 7950GX-2 VGA anyone have test this new bios on PT?? |
|
|
Dec 20 2006, 11:41 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(flatfinger @ Dec 20 2006, 10:01 AM) searching for new/latest bios for 965PT...i found this one Not try yet, bcoz i dun have 7950GX-2, Biostar bios Link Update Date 2006/12/15 Size 432KB Download Ip96a921bs.exe Description Resolve POST problem with Nvidia 7950GX-2 VGA anyone have test this new bios on PT?? |
|
|
Dec 20 2006, 12:12 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nakata101 @ Dec 20 2006, 11:41 AM) Not try yet, bcoz i dun have 7950GX-2,  hehe..by the way change ur signiture la..the spelling on TForce  This post has been edited by flatfinger: Dec 20 2006, 12:13 PM |
|
|
Dec 20 2006, 11:06 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(flatfinger @ Dec 20 2006, 12:12 PM) hehe..by the way change ur signiture la..the spelling on TForce |
|
|
Dec 21 2006, 10:44 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(nakata101 @ Dec 20 2006, 11:06 PM) Thx.. u r the 7th members who care about my sig, 4 month ago the first member who ask me is that spell of bahasa malaysia... TForse = Tforce, then wht is 7600GST?? |
|
|
Dec 22 2006, 07:43 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Dec 21 2006, 10:44 PM) then wht is 7600GST?? GST isn't typing error, is it only the name for 7600GS with DDR3. U can check at Inno3d website. |
|
|
Dec 22 2006, 02:27 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nakata101 @ Dec 22 2006, 07:43 AM) GST isn't typing error, is it only the name for 7600GS with DDR3. U can check at Inno3d website. yup inno3d got the 76gst version...its likely the upgrade version of 76gs that using DDR2 to DDR3... |
|
|
Dec 22 2006, 05:10 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Guys where to get the 2.4v vDimm adaptor? How much it cost?
Thanks. |
|
|
Dec 22 2006, 05:32 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Dec 22 2006, 05:10 PM) Guys where to get the 2.4v vDimm adaptor? How much it cost? Me also looking for this item, but really dunno where to get it...Thanks. |
|
|
Dec 22 2006, 05:38 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
|
|
|
Dec 22 2006, 05:45 PM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Why look for "VDIMM adaptor" when you can just a pencil to mod it?
 Check out my guide for Biostar TForce 965 Deluxe VDIMM Pencil Mod This post has been edited by pcmoddingmy: Dec 22 2006, 05:46 PM |
|
|
Dec 22 2006, 05:53 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Wao.. thanks for sharing
. 965PT can use rite?? 965PT is different wth 965PT Deluxe?? This post has been edited by yehlai: Dec 22 2006, 05:54 PM |
|
|
Dec 22 2006, 05:57 PM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(yehlai @ Dec 22 2006, 05:53 PM) Wao.. thanks for sharing. 965PT can use rite?? No probs... the guide was up for quite sometime already.. hehe965PT is different wth 965PT Deluxe?? Well actually, the 965 Deluxe and 965PT uses exact same PCB. The only difference is the SB chipset (without RAID) and only 4xSATA on the 965PT. In fact, some users have successfully flashed 965 Deluxe BIOS onto the 965PT. Anyways, I suggest you check out the VDIMM controller near the 2.2V jumper just to make sure that it reads "RT9202". If its not the same, I suggest you snap a picture of it and let me check it out. The VDIMM pencil mod should be similar... |
|
|
Dec 22 2006, 06:00 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Dec 22 2006, 05:53 PM) Wao.. thanks for sharing Not much different lah, 2 thing not same only....PT can support up to 8G memory but Deluxe only 4G... . 965PT can use rite?? 965PT is different wth 965PT Deluxe?? This post has been edited by nakata101: Dec 22 2006, 06:03 PM |
|
|
Dec 22 2006, 06:02 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(pcmoddingmy @ Dec 22 2006, 05:57 PM) No probs... the guide was up for quite sometime already.. hehe Thand you so much.. Bro... hope my ram will not burn by 2.4v.....Well actually, the 965 Deluxe and 965PT uses exact same PCB. The only difference is the SB chipset (without RAID) and only 4xSATA on the 965PT. In fact, some users have successfully flashed 965 Deluxe BIOS onto the 965PT. Anyways, I suggest you check out the VDIMM controller near the 2.2V jumper just to make sure that it reads "RT9202". If its not the same, I suggest you snap a picture of it and let me check it out. The VDIMM pencil mod should be similar... |
|
|
Dec 22 2006, 06:40 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(nakata101 @ Dec 22 2006, 06:02 PM) Thand you so much.. Bro... hope my ram will not burn by 2.4v..... last time i use 2.4v for almost one month,ntg happen..hehe..but remember get a fan to blow it  |
|
|
Dec 22 2006, 06:54 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(coolice @ Dec 22 2006, 06:40 PM) last time i use 2.4v for almost one month,ntg happen..hehe..but remember get a fan to blow it wao.. u r cool!! Then what happen after 1 month? |
|
|
Dec 22 2006, 06:56 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(nakata101 @ Dec 22 2006, 06:54 PM) wao.. u r cool!! sold off my ram and get d9 Then what happen after 1 month? |
|
|
Dec 22 2006, 09:24 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(pcmoddingmy @ Dec 22 2006, 05:45 PM) Why look for "VDIMM adaptor" when you can just a pencil to mod it? 1 question....this only apply when we set the 2.2V jumper is enabled and shade the resistor rite??...if after shading we set back the jumper down to normal state...the vdimm can be ctrl back or not??Check out my guide for Biostar TForce 965 Deluxe VDIMM Pencil Mod This post has been edited by flatfinger: Dec 22 2006, 09:36 PM |
|
|
Dec 22 2006, 09:32 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(pcmoddingmy @ Dec 22 2006, 05:57 PM) Anyways, I suggest you check out the VDIMM controller near the 2.2V jumper just to make sure that it reads "RT9202". If its not the same, I suggest you snap a picture of it and let me check it out. The VDIMM pencil mod should be similar... QUOTE(coolice @ Dec 22 2006, 06:56 PM) sold off my ram and get d9 Your 965PT got compatible prob with D9 RAM or not?This post has been edited by yehlai: Dec 22 2006, 09:35 PM |
|
|
Dec 22 2006, 10:48 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Dec 22 2006, 09:32 PM) Thanx bro, but im noob... so not dare to try pencil mod yet.. im not pro like u lol D9 is ir mean D9GKX? I m using this ram now... no problem at all... Your 965PT got compatible prob with D9 RAM or not? |
|
|
Dec 22 2006, 11:20 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(nakata101 @ Dec 22 2006, 10:48 PM) D9 is ir mean D9GKX? I m using this ram now... no problem at all... Okay thanks |
|
|
Dec 22 2006, 11:21 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(yehlai @ Dec 22 2006, 09:32 PM) Thanx bro, but im noob... so not dare to try pencil mod yet.. im not pro like u lol im using 965 Deluxe anyway.. Your 965PT got compatible prob with D9 RAM or not? nope..work very well with it.. 2.15-2.17 vdimm capable 616mhz 5-5-4-9 but too bad i din snap screenshot QUOTE(nakata101 @ Dec 22 2006, 10:48 PM) D9 is ir mean D9GKX? I m using this ram now... no problem at all... yup |
|
|
Dec 22 2006, 11:27 PM
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(flatfinger @ Dec 22 2006, 09:24 PM) 1 question....this only apply when we set the 2.2V jumper is enabled and shade the resistor rite??...if after shading we set back the jumper down to normal state...the vdimm can be ctrl back or not?? Yes, if you set the jumper back to normal position, VDIMM will be back to normal. |
|
|
Dec 23 2006, 06:49 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(pcmoddingmy @ Dec 22 2006, 11:27 PM) Yes, if you set the jumper back to normal position, VDIMM will be back to normal. maybe will try later...malas remove mobo from casing... |
|
|
Jan 8 2007, 03:33 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
|
|
|
Jan 8 2007, 04:47 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
|
|
|
Jan 9 2007, 10:10 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 8 2007, 03:33 PM)  thank you bro.. i just think to ask for the latest BIOS for this mobo.. |
|
|
Jan 9 2007, 10:13 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nakata101 @ Jan 8 2007, 04:47 PM) Taiwan link still on P96cac29bs...the china link is the newest 103QUOTE(yehlai @ Jan 9 2007, 10:10 AM) thank you bro.. i just think to ask for the latest BIOS for this mobo.. now im currently running @3.5ghz stable....even boot n run super PI 1M @3.66....previous bios can't... This post has been edited by flatfinger: Jan 9 2007, 10:30 AM |
|
|
Jan 9 2007, 11:12 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(nakata101 @ Jan 8 2007, 04:47 PM) Hey guys i saw from this website.. why got TF 965 one?? I never see this mobo b4, cant find in lyp too. Izzit different with TF 965PT?? |
|
|
Jan 9 2007, 11:15 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Jan 9 2007, 11:12 AM) Hey guys i saw from this website.. why got TF 965 one?? I cant remember which lyt member said the different between 965 and 965PT, 965PT only got 4 sata port but 965 got 6.I never see this mobo b4, cant find in lyp too. Izzit different with TF 965PT?? QUOTE(flatfinger @ Jan 9 2007, 10:13 AM) Taiwan link still on P96cac29bs...the china link is the newest 103 Ic.. look like the Taiwan TFroce r little bit late.... they still the release date on 5-1-2007.. This post has been edited by nakata101: Jan 9 2007, 11:20 AM |
|
|
Jan 9 2007, 11:57 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 9 2007, 11:12 AM) Hey guys i saw from this website.. why got TF 965 one?? TF 965 and TF 965 Deluxe got 6 sata...but only TF 965 Deluxe have Raid....TF 965PT got 4 sata...I never see this mobo b4, cant find in lyp too. Izzit different with TF 965PT?? the other diff is TF 965 using diff intergrated audio than TF 965 Deluxe n TF 965PT... correct me if im wrong |
|
|
Jan 9 2007, 10:00 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
http://www.xtremesystems.org/forums/showth...174#post1941174
Combination of 5.134Mhz. E6600 with Biostar TF 965 Deluxe |
|
|
Jan 10 2007, 10:42 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
he done all the vmod...
|
|
|
Jan 10 2007, 10:52 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(flatfinger @ Jan 9 2007, 11:57 AM) TF 965 and TF 965 Deluxe got 6 sata...but only TF 965 Deluxe have Raid....TF 965PT got 4 sata... Yup.. i m not sure is that TF965 using diffrent intergrated audio than 965 DLX and 956PT, i know that 965DLX only support up to 4G memory only, but 965/PT can support up to 8G memory.the other diff is TF 965 using diff intergrated audio than TF 965 Deluxe n TF 965PT... correct me if im wrong |
|
|
Jan 10 2007, 11:09 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nakata101 @ Jan 10 2007, 10:52 AM) Yup.. i m not sure is that TF965 using diffrent intergrated audio than 965 DLX and 956PT, i know that 965DLX only support up to 4G memory only, but 965/PT can support up to 8G memory. yup..forgot that part.. |
|
|
Jan 10 2007, 05:24 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 10 2007, 10:42 AM) he done all the vmod... I saw vCore 1.113v only. Is tht vmod? How to see got vMod enlighten me please?This post has been edited by yehlai: Jan 10 2007, 05:24 PM |
|
|
Jan 10 2007, 06:40 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 10 2007, 05:24 PM) I saw vCore 1.113v only. Is tht vmod? How to see got vMod enlighten me please? haiya u see only ka...read the 1st post..he already stated it"Biostar P965 TForce Deluxe bios 914 Rebels Heaven mod (Vcore, Vdroop, Vdimm mods)" and "I've already benched @5050MHz with 1.90Vcore" and post #29 "Let me share this nice Super Pi 32M done with only 1.71Vcore..." <----the cpu-z display 1.113 n as u know cpu-z read wrong voltage This post has been edited by flatfinger: Jan 10 2007, 06:47 PM |
|
|
Jan 10 2007, 06:54 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
@flatfinger
OH.. thanks bro, now i see arldy. vCore = 1.89v. His E6600 can take such vCore... really unbelieveble. This post has been edited by yehlai: Jan 10 2007, 06:58 PM |
|
|
Jan 10 2007, 06:59 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 10 2007, 06:54 PM) @flatfinger they using 2-stager cooling method that give -ve temp lor....OH.. thanks bro, now i see arldy. vCore = 1.89v. His E6600 can take such vCore... really unbelieveble. like this one Cooling: Cascade (R290+R170 refrigerants, 8082+7950Btu/h rotaries compressors, @ about -100°C)  This post has been edited by flatfinger: Jan 10 2007, 07:11 PM |
|
|
Jan 13 2007, 12:25 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 10 2007, 06:59 PM) they using 2-stager cooling method that give -ve temp lor.... yea... phase cooling haha.like this one Cooling: Cascade (R290+R170 refrigerants, 8082+7950Btu/h rotaries compressors, @ about -100°C) Thanks im noob in cooling la haha |
|
|
Jan 16 2007, 01:28 AM
|
Junior Member
5 posts Joined: Oct 2006 From: Sibu ^^  
|
pro.. pro.. wait i get my rigs, i'll call u up. help me do that. haha. thanks for sharing.
|
|
|
Jan 16 2007, 08:41 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(Lov3Lov3 @ Jan 16 2007, 01:28 AM) pro.. pro.. wait i get my rigs, i'll call u up. help me do that. haha. thanks for sharing. help u do wht ?? |
|
|
Jan 17 2007, 07:52 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Jan 16 2007, 08:41 PM) help u do wht ?? kamon bro, show us some of ur new setup benchies |
|
|
Jan 17 2007, 08:37 PM
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
hello guys
im just wondering what hsf can i use for my cpu coz the cpu placement is near the edge of the board and close to the psu in my casing |
|
|
Jan 18 2007, 01:05 AM
|
Senior Member
813 posts Joined: Apr 2005
|
Do you all experience any temperature problem with new bios? I am having 68C reading with coretemp for both core. But using biostar monitor is 37C. Weird
|
|
|
Jan 18 2007, 06:59 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(linkeong @ Jan 18 2007, 01:05 AM) Do you all experience any temperature problem with new bios? I am having 68C reading with coretemp for both core. But using biostar monitor is 37C. Weird Bro... all ES version still cant fully support the Core Temp or TAT, so thats nothing wrong with this mobo bios. Dun worry about it ~~ |
|
|
Jan 18 2007, 08:52 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(linkeong @ Jan 18 2007, 01:05 AM) Do you all experience any temperature problem with new bios? I am having 68C reading with coretemp for both core. But using biostar monitor is 37C. Weird Last time my Gigabyte+ Retail E6300 also have same problem.. BIOS temp reading should be diff with TAT or Core temp. Normally BIOS reading is lower. This post has been edited by yehlai: Jan 18 2007, 08:52 PM |
|
|
Jan 19 2007, 01:44 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
minna.. got a lill prob wit my965pt.... in bios can read the cpu fan speed.. but the given software cant read the fan...(mb5 oso cant).. btw im using 965duluxe cd for the driver and software....
|
|
|
Jan 19 2007, 05:25 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Jan 18 2007, 08:52 PM) Last time my Gigabyte+ Retail E6300 also have same problem.. Ur retail also got this problem, also report on lowest temp or highest temp?BIOS temp reading should be diff with TAT or Core temp. Normally BIOS reading is lower. |
|
|
Jan 19 2007, 09:22 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 19 2007, 01:44 AM) minna.. got a lill prob wit my965pt.... in bios can read the cpu fan speed.. but the given software cant read the fan...(mb5 oso cant).. btw im using 965duluxe cd for the driver and software.... im not using the given software anymore..but last time its ok...maybe u can used others program to monitor ur reading...i recommended u to use EVEREST ultimate edition... |
|
|
Jan 19 2007, 01:32 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
When will 965PT release their new BIOS..
Argh.. now DS3 also can hit 505Fsb with E6300 alrdy with their new BIOS. Cmon Biostar.. |
|
|
Jan 19 2007, 02:41 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 19 2007, 01:32 PM) When will 965PT release their new BIOS.. u r using what cpu multiplier? n divider? to get ur ES running at 3.6Ghz..i notice if ur ram is at 543Mhz...Argh.. now DS3 also can hit 505Fsb with E6300 alrdy with their new BIOS. Cmon Biostar.. |
|
|
Jan 19 2007, 03:16 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 19 2007, 02:41 PM) u r using what cpu multiplier? n divider? to get ur ES running at 3.6Ghz..i notice if ur ram is at 543Mhz... oh.. the sigg i dint change yet BTW how to get higher vDimm?? 2.2v is too low. I want to clock my RAM now.. try get higher clock @Cl-4. |
|
|
Jan 19 2007, 03:34 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 19 2007, 03:16 PM) oh.. the sigg i dint change yet on 965PT??? u have to do the vdimm mod... BTW how to get higher vDimm?? 2.2v is too low. I want to clock my RAM now.. try get higher clock @Cl-4. |
|
|
Jan 19 2007, 03:38 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 19 2007, 03:34 PM) on 965PT??? u have to do the vdimm mod... But i saw last time they have one converter.. dunno where to buy.I tot the converter is bundle with mobo one.. b4 i purchasse it. 2.2v is way to low. lol This post has been edited by yehlai: Jan 19 2007, 03:38 PM |
|
|
Jan 19 2007, 03:46 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 19 2007, 03:38 PM) But i saw last time they have one converter.. dunno where to buy. then do the pencil vdimm mod by pcmodding lor...easier...I tot the converter is bundle with mobo one.. b4 i purchasse it. 2.2v is way to low. lol anyway e6600 doesn't need high ram freq to oc it...unless u r using e6300... 9x400Mhz = 3.6Ghz 8x450Mhz = 3.6Ghz i think ur d9 already nice without the vdimm mod... |
|
|
Jan 19 2007, 03:57 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 19 2007, 03:46 PM) then do the pencil vdimm mod by pcmodding lor...easier... Ya agree.. anyway e6600 doesn't need high ram freq to oc it...unless u r using e6300... 9x400Mhz = 3.6Ghz 8x450Mhz = 3.6Ghz i think ur d9 already nice without the vdimm mod... But tight lanterncy can get better Super PI. Now using CL-4. This post has been edited by yehlai: Jan 19 2007, 03:57 PM |
|
|
Jan 19 2007, 03:59 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 19 2007, 03:57 PM) Ya agree.. there's d9 can run at cas 3...try it..maybe ur chip is one of them try at 3-3-3-8 400Mhz But tight lanterncy can get better Super PI. Now using CL-4. |
|
|
Jan 19 2007, 04:06 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 19 2007, 03:59 PM) there's d9 can run at cas 3...try it..maybe ur chip is one of them try at 3-3-3-8 400Mhz Now cant alrdy.. last time Gigabyte vDimm can set 2.4v to run CL-3. Super PI @ 3.0Ghz faster than 3.15Ghz. Use RAM to pawn them lol. This post has been edited by yehlai: Jan 19 2007, 04:07 PM |
|
|
Jan 19 2007, 04:08 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 19 2007, 04:06 PM) Now cant alrdy.. last time Gigabyte vDimm can set 2.4v to run CL-3. heheh..either u do the vmod...or we wait for newer bios..Super PI @ 3.0Ghz faster than 3.15Ghz. Use RAM to pawn them lol. |
|
|
Jan 19 2007, 08:37 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
ehh.. wat is cl 4... izzit the first number in ram timing... btw i saw this setting in bios errmmm... the max is 1.5vc if not mistaken... seems like to abort something if v rise to 1.5v(if i set to 1.5)...
|
|
|
Jan 19 2007, 10:03 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 19 2007, 08:37 PM) ehh.. wat is cl 4... izzit the first number in ram timing... btw i saw this setting in bios errmmm... the max is 1.5vc if not mistaken... seems like to abort something if v rise to 1.5v(if i set to 1.5)... its call cas latency...yes the 1st number ...example 4-4-4-12..should be cas latency 4...the lower ur cas with higher frequency is the best.... |
|
|
Jan 19 2007, 10:25 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
owh.. and for the nonsense explaination of the bios option.... edi found what they call it...FSB termination... and MCH voltage.... what r these option.. how do u set ..n bout pci-e thinggy(dunno the term) .. the default is 100... i just ignore this option coz dunno how it works... maybe that why i got vga error led ....
|
|
|
Jan 20 2007, 02:03 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 19 2007, 10:25 PM) owh.. and for the nonsense explaination of the bios option.... edi found what they call it...FSB termination... and MCH voltage.... what r these option.. how do u set ..n bout pci-e thinggy(dunno the term) .. the default is 100... i just ignore this option coz dunno how it works... maybe that why i got vga error led .... im not very sure about fsb termination maybe its likely linked to ur fsb setting...vmch is ur intel chipset voltage on the motherboard...both of the voltage setting is used to stablize ur overclock...u have to try n error to get the correct setting...no one can explain it..its based on experience by urself futhermore not all using the same hardware.pci-e setting is for ur gfx used..if u wanna overclocked them...mostly ppl just leave it at 100 or auto setting. |
|
|
Jan 20 2007, 02:19 PM
|
|
Senior Member
813 posts Joined: Apr 2005
|
Most fo the time people try to push as far as they can at default voltage or lower. When you overclock doesnt boots only you up the vmch.
|
|
|
Jan 20 2007, 02:42 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(linkeong @ Jan 20 2007, 02:19 PM) Most fo the time people try to push as far as they can at default voltage or lower. When you overclock doesnt boots only you up the vmch. FYI..the datasheet for the North Bridge (G)mch chip(965P) states 1.375V is the absolute maximum voltage...the default in bios is actually 1.28v |
|
|
Jan 20 2007, 08:02 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(linkeong @ Jan 20 2007, 03:19 PM) Most fo the time people try to push as far as they can at default voltage or lower. When you overclock doesnt boots only you up the vmch. owh... now i got the point but edi fry my nb... i use the max for vmch... maybe that what cause my mobo fryy.. |
|
|
Jan 20 2007, 08:18 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 20 2007, 08:02 PM) owh... now i got the point but edi fry my nb... i use the max for vmch... maybe that what cause my mobo fryy.. u can push higher...but u have to put active cooling...like a fan blow to ur NB... |
|
|
Jan 20 2007, 08:47 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(flatfinger @ Jan 20 2007, 09:18 PM) u can push higher...but u have to put active cooling...like a fan blow to ur NB... will remember that.... hav to wait RMA... so wat nb cooling that u guys use... |
|
|
Jan 20 2007, 09:25 PM
|
|
Senior Member
813 posts Joined: Apr 2005
|
I didnt use any nb cooling, big typhoon so big push air through the nb heatsink the heatsink not even warm, feel like normal when pc not on temps.
|
|
|
Jan 21 2007, 01:05 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Hey guys when i o'c to 3.6GHz i can feel the NB is so hot.. cant even touch it!! Its hot like an iron.
Do u guys encounter the same problme?? |
|
|
Jan 21 2007, 01:23 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(yehlai @ Jan 21 2007, 01:05 PM) Hey guys when i o'c to 3.6GHz i can feel the NB is so hot.. cant even touch it!! Its hot like an iron. change ur chipset cooler Do u guys encounter the same problme?? ..biostar still using cheapo chipset cooler |
|
|
Jan 21 2007, 01:36 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(coolice @ Jan 21 2007, 01:23 PM) change ur chipset cooler But Biostar have good o'c result.. thts why i switch to Bisotar ..biostar still using cheapo chipset cooler neway i can make my own NB cooler with active cooling. Just looking for some other stuff now. I had modifief my TTBT b4, now its run 4-5C cooler than b4. |
|
|
Jan 21 2007, 05:05 PM
|
Junior Member
8 posts Joined: Jan 2007 From: penang
|
Guys..this mobo really rocks! im using pentium d 2.8 ghz n patriot ram 1 gb.no problem oc them to 3.15ghz at ddr2 900!! this is kewl! i manage 2 get below 55 degree!
|
|
|
Jan 21 2007, 08:09 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(kamaruissma @ Jan 21 2007, 05:05 PM) Guys..this mobo really rocks! im using pentium d 2.8 ghz n patriot ram 1 gb.no problem oc them to 3.15ghz at ddr2 900!! this is kewl! i manage 2 get below 55 degree! I tot Pent.D 2.8Ghz can easily reach 3.6Ghz one.. . |
|
|
Jan 21 2007, 08:43 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Jan 21 2007, 08:09 PM) I tot Pent.D 2.8Ghz can easily reach 3.6Ghz one.. . yupp, should be 3.8Ghz no probmy pentium d 930 oso lastime easily reach 4.2Ghz  |
|
|
Jan 21 2007, 08:45 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Hey guys when i o'c to 3.6GHz i can feel the NB is so hot.. cant even accidenly touch it!! Its hot like an iron.
Do u guys encounter the same problme?? |
|
|
Jan 21 2007, 10:57 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 21 2007, 08:45 PM) Hey guys when i o'c to 3.6GHz i can feel the NB is so hot.. cant even accidenly touch it!! Its hot like an iron. if ya put the NB voltage above 1.35v actually 1.47v....just put some active cooling like a fan blow to it...unless u change it with 3rd party chipset cooler...Do u guys encounter the same problme?? |
|
|
Jan 21 2007, 11:04 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(flatfinger @ Jan 21 2007, 11:57 PM) if ya put the NB voltage above 1.35v actually 1.47v....just put some active cooling like a fan blow to it...unless u change it with 3rd party chipset cooler... u mean the reading is not accurate laa... izzit.. |
|
|
Jan 21 2007, 11:11 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 21 2007, 11:04 PM) u mean the reading is not accurate laa... izzit.. yes not accurate..pls refer hereActual Voltage Measurements Actual Vcore Measurements 1.400V = 1.39V 1.450V = 1.44V (BIOS displays 1.42V) 1.500V = 1.49V 1.550V = 1.54V 1.600V = 1.59V Actual Vdimm Measurements 1.8 = 1.86V 2.0 = 1.95V 2.1 = 2.05V 2.2 = 2.15V 2.2 Jumper = 2.18V-2.20V Actual Vmch Measurements 1.25V = 1.28V 1.35V = 1.47V 1.45V = 1.67V 1.55V = 1.87V This post has been edited by flatfinger: Jan 21 2007, 11:12 PM |
|
|
Jan 22 2007, 12:47 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
2.2 = 2.15V
2.2 Jumper = 2.18V-2.20V then wat the different between these jumper n no jumper vdimm... seems to be the same value to me... |
|
|
Jan 22 2007, 07:29 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 22 2007, 12:47 AM) 2.2 = 2.15V depend on ur mobo...but if the 2.2 jumper enable it suppose to give value near 2.2v...2.2 Jumper = 2.18V-2.20V then wat the different between these jumper n no jumper vdimm... seems to be the same value to me... |
|
|
Jan 22 2007, 10:37 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 21 2007, 11:11 PM) yes not accurate..pls refer here Where u got those figures?? Actual Voltage Measurements Actual Vcore Measurements 1.400V = 1.39V 1.450V = 1.44V (BIOS displays 1.42V) 1.500V = 1.49V 1.550V = 1.54V 1.600V = 1.59V Actual Vdimm Measurements 1.8 = 1.86V 2.0 = 1.95V 2.1 = 2.05V 2.2 = 2.15V 2.2 Jumper = 2.18V-2.20V Actual Vmch Measurements 1.25V = 1.28V 1.35V = 1.47V 1.45V = 1.67V 1.55V = 1.87V 1.55v MCH = 1.87v. !?!??! Wao.. tht was too much over voltage!! no wonder my NB is so hot. Biostar's vMCH is crazee.. .if keep pumping 1.87v i think will burn the NB soon. This post has been edited by yehlai: Jan 22 2007, 10:41 AM |
|
|
Jan 22 2007, 11:14 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 22 2007, 10:37 AM) Where u got those figures?? its a bug...dont put 1.55v lor...burn ur NB...1.35v already at 1.47v....that max already..1.55v MCH = 1.87v. !?!??! Wao.. tht was too much over voltage!! no wonder my NB is so hot. Biostar's vMCH is crazee.. .if keep pumping 1.87v i think will burn the NB soon. |
|
|
Jan 22 2007, 11:20 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 22 2007, 11:14 AM) its a bug...dont put 1.55v lor...burn ur NB...1.35v already at 1.47v....that max already.. Lucky saw ur post. I always set 1.55v for MCH. if keep doing this sure my NB will die soon.. thinking to get the Noctua chipset cooler.. but cost RM90. So expensive... |
|
|
Jan 22 2007, 11:46 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 22 2007, 11:20 AM) Lucky saw ur post. I always set 1.55v for MCH. im going for zalman ZM-NBF47 only...gud n nice performance..moderno sale it RM38..dunt know he has stock or not....by the way...my oc setup only used default vmch at 1.25v actually 1.28vif keep doing this sure my NB will die soon.. thinking to get the Noctua chipset cooler.. but cost RM90. So expensive... This post has been edited by flatfinger: Jan 22 2007, 11:48 AM |
|
|
Jan 22 2007, 01:45 PM
|
|
Junior Member
8 posts Joined: Jan 2007 From: penang
|
QUOTE(gengstapo @ Jan 21 2007, 08:43 PM) yupp, should be 3.8Ghz no prob whoa!! sori guys..im just statrting to oc..what coolant u use gettin 3.8? yeah,its true..i've tried to oc to 3.5 but my NB so hot la..like iron haha..i think my pc under utilized.suppose to get conroe next time my pentium d 930 oso lastime easily reach 4.2Ghz |
|
|
Jan 22 2007, 09:01 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 22 2007, 11:46 AM) im going for zalman ZM-NBF47 only...gud n nice performance..moderno sale it RM38..dunt know he has stock or not....by the way...my oc setup only used default vmch at 1.25v actually 1.28v Zalman.. hope its good. My MCH is 1.25v also @3.2Ghz. Only set higher vCore. But the NB still quite hot. This post has been edited by yehlai: Jan 22 2007, 09:27 PM |
|
|
Jan 23 2007, 08:44 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 22 2007, 09:01 PM) Zalman.. hope its good. well from the review...its gud...even beat the HR-05...my setting still at default vMCH even at 3.5Ghz..My MCH is 1.25v also @3.2Ghz. Only set higher vCore. But the NB still quite hot. |
|
|
Jan 23 2007, 12:14 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
vdimm mod module for Biostar T-Force P965
 Attached thumbnail(s) 
|
|
|
Jan 23 2007, 01:17 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(rlhc17 @ Jan 23 2007, 12:14 PM) vdimm mod module for Biostar T-Force P965 u jual ka??? kekekkee |
|
|
Jan 23 2007, 06:46 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jan 23 2007, 08:44 AM) well from the review...its gud...even beat the HR-05...my setting still at default vMCH even at 3.5Ghz.. Wao.. really? Then i might get it.. But i hv google it b4, cant find any reviews on Zalman NB QUOTE(rlhc17 @ Jan 23 2007, 12:14 PM) vdimm mod module for Biostar T-Force P965 Intrestin'Its a bit diff with the one i saw last time.. It come with Biostar mobo?? This post has been edited by yehlai: Jan 23 2007, 06:48 PM |
|
|
Jan 24 2007, 04:22 AM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(flatfinger @ Jan 23 2007, 01:17 PM) u jual ka??? kekekkee why not ! i can make another set ma.......... QUOTE(yehlai @ Jan 23 2007, 06:46 PM) Wao.. really? Then i might get it.. this one using better quality vr But i hv google it b4, cant find any reviews on Zalman NB Intrestin' Its a bit diff with the one i saw last time.. It come with Biostar mobo?? |
|
|
Jan 24 2007, 06:41 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(rlhc17 @ Jan 24 2007, 04:22 AM) why not ! i can make another set ma.......... Make one more set for me, how much u gonna sell it, bro... |
|
|
Jan 24 2007, 06:55 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 23 2007, 06:46 PM) Wao.. really? Then i might get it.. aiyarrr...u not using google in the rite way...heres the reviewBut i hv google it b4, cant find any reviews on Zalman NB Chipset Cooler Roundup link QUOTE(rlhc17 @ Jan 24 2007, 04:22 AM) why not ! i can make another set ma.......... huhuu..nice..how much u wanna sale it...cheap2x one lor....it would be nice...my Ballistix is coming...This post has been edited by flatfinger: Jan 24 2007, 07:02 AM |
|
|
Jan 24 2007, 09:38 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(rlhc17 @ Jan 24 2007, 04:22 AM) this one using better quality vr Very intrested here... faster reg a copyright and start sell it !! |
|
|
Jan 29 2007, 09:05 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
new bios update for Biostar 965PT by Rabel Heaven Mod
new bios P96CA119rh2 link RHCF Releases Mod BIOS P96CA119rh2 With Memtest 1.7 Update! The Rebels Haven releases a second mod version of the brand new Beta 119 BIOS. Note that this BIOS will work on the Deluxe, but you may lose the RAID function... Here's the changelog: Module Update **Update Integrated Memtest to 1.70 version **The Beta BIOS was released to add support for the 4000 series of Conroe by adding a 400 Memory setting to the 533, 667, 800. Changed Default Setting Full Screen Logo: Set to Disable EPA Logo: Set to Enable Summary Screen: Set to Enable C1E Function: Set to Disable Execute Disable Bit: Set to Disable Virtualization Technology: Set to Disable Unhid CPU L1 & L2 Cache Auto Detect PCI Clk: Set to Disable Spread Spectrum: Set Startup to Disable |
|
|
Jan 29 2007, 07:39 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Hey the new BIOS is good. Nakata.. flatfinger u guys alrdy tried it??
Can improve 5-10FSB i think. |
|
|
Jan 29 2007, 09:58 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 29 2007, 07:39 PM) Hey the new BIOS is good. Nakata.. flatfinger u guys alrdy tried it?? not yet lor...im waiting for my ram to arrived...looking forward to ur result..hope it go higher...Can improve 5-10FSB i think. |
|
|
Jan 30 2007, 02:40 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
Added on January 30, 2007, 2:42 amhuh.... i tot this thread edi dying.. .. btw bout the new bios, izzit a moded bios.... or the official one... (hehe juz got back my mobo).. p/s:yehlai, u stilll want the voltage reading screeniees... This post has been edited by PVCpipe: Jan 30 2007, 02:45 AM |
|
|
Jan 30 2007, 10:25 AM
|
Junior Member
16 posts Joined: Aug 2006 From: Sg besi, kuala lumpur
|
noob question..maybe out of topic..
is it possible for me to put this mobo into mico atx casing?? |
|
|
Jan 30 2007, 10:31 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(Zulhuzairi @ Jan 30 2007, 10:25 AM) noob question..maybe out of topic.. no, unless ur micro casing can fit normal atx mobo is it possible for me to put this mobo into mico atx casing?? |
|
|
Jan 30 2007, 10:57 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Jan 30 2007, 02:40 AM) Added on January 30, 2007, 2:42 amhuh.... i tot this thread edi dying.. .. btw bout the new bios, izzit a moded bios.... or the official one... (hehe juz got back my mobo).. p/s:yehlai, u stilll want the voltage reading screeniees... |
|
|
Jan 30 2007, 05:57 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(PVCpipe @ Jan 30 2007, 02:40 AM) Added on January 30, 2007, 2:42 amhuh.... i tot this thread edi dying.. .. btw bout the new bios, izzit a moded bios.... or the official one... (hehe juz got back my mobo).. p/s:yehlai, u stilll want the voltage reading screeniees... Hows your new mobo?? 2 weeks can get back? So fast!! The 12v rails reading? Yes, pls. QUOTE(flatfinger @ Jan 29 2007, 09:58 PM) not yet lor...im waiting for my ram to arrived...looking forward to ur result..hope it go higher... Wht RAM? your E64 so powerful alrdy.. can reach 3.8GHz. The new BIOS can help me to reach 410 FSB.. but not too stable.. pumping 1.8v on vCore. No feeling good bout tht. Better stop at 405 FSB. Just wanna get Super PI under 14Sec then satisfy alrdy. This post has been edited by yehlai: Jan 30 2007, 06:43 PM |
|
|
Jan 30 2007, 08:37 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Jan 30 2007, 05:57 PM) This thread wont die.. more and more ppl using Biostar now. I also migrate from Gigabyte to Biostar one actually. yeahh, biostar become 1 of best budget c2d mobo currently. i believe more & more user will get this superb mobo Hows your new mobo?? 2 weeks can get back? So fast!! The 12v rails reading? Yes, pls. Wht RAM? your E64 so powerful alrdy.. can reach 3.8GHz. The new BIOS can help me to reach 410 FSB.. but not too stable.. pumping 1.8v on vCore. No feeling good bout tht. Better stop at 405 FSB. Just wanna get Super PI under 14Sec then satisfy alrdy. i still not yet have the chances to get my hand into it.. hope to see more g00d result from u guys ps: 1.8V?? u sure kiddin rite? |
|
|
Jan 30 2007, 09:32 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Now so far is 407 x9. Super PI = 14.015 sec. Quite stable.
But vDimm 2.2V only, so my RAM cant go beyond 1000MHz. So pity. QUOTE(gengstapo @ Jan 30 2007, 08:37 PM) yeahh, biostar become 1 of best budget c2d mobo currently. i believe more & more user will get this superb mobo Yes.. 1.8v is the max alrdy. i still not yet have the chances to get my hand into it.. hope to see more g00d result from u guys ps: 1.8V?? u sure kiddin rite? Now set lower.. dont dare to put too much vCore. |
|
|
Jan 30 2007, 09:51 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Jan 30 2007, 09:32 PM) Now so far is 407 x9. Super PI = 14.015 sec. Quite stable. dya run stress on ur setup? or just simple pi calculation? But vDimm 2.2V only, so my RAM cant go beyond 1000MHz. So pity. Yes.. 1.8v is the max alrdy. Now set lower.. dont dare to put too much vCore.  |
|
|
Jan 30 2007, 10:00 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(gengstapo @ Jan 30 2007, 09:51 PM) dya run stress on ur setup? or just simple pi calculation? Yes only for Super PI. Get the reading and take snap then finish job.For daily use i only run 3.22GHz. Moreover dont want to stress it, becos its almost impossible to get stable setup at 3.6GHz. No time also But i think most of the E6600 overclocers here o'c with >1.5-1.6v vCore, becoz i saw their CPU-Z screenies, the vCore is 1.213v. Actually its a bug from CPU-Z. When if the vCore set too high then the CPU-Z will show 1.213v one. This post has been edited by yehlai: Jan 30 2007, 10:05 PM |
|
|
Feb 1 2007, 04:02 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Jan 30 2007, 09:32 PM) Now so far is 407 x9. Super PI = 14.015 sec. Quite stable. when u set 1.8v in bios...what is actual read in windows??? it must be below than that rite...But vDimm 2.2V only, so my RAM cant go beyond 1000MHz. So pity. Yes.. 1.8v is the max alrdy. Now set lower.. dont dare to put too much vCore. |
|
|
Feb 1 2007, 08:24 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Feb 1 2007, 04:02 PM) when u set 1.8v in bios...what is actual read in windows??? it must be below than that rite... IIRC its 1.213vBut i dont dare to run 1M or prime it. Just o'c to take snap.. not 24/7 usage. Set vCore to the max is very scary.. |
|
|
Feb 2 2007, 12:02 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Feb 1 2007, 08:24 PM) IIRC its 1.213v 1.213v kira ok lorr if compared with my c0mmando.. i put vcore 1.4v & when it come to cpuz, the reading was 1.056v But i dont dare to run 1M or prime it. Just o'c to take snap.. not 24/7 usage. Set vCore to the max is very scary.. really nice rite? ps: already try with 1st bios, 0702 & 0801 This post has been edited by gengstapo: Feb 2 2007, 12:03 PM |
|
|
Feb 3 2007, 12:13 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(gengstapo @ Feb 2 2007, 12:02 PM) 1.213v kira ok lorr if compared with my c0mmando.. i put vcore 1.4v & when it come to cpuz, the reading was 1.056v maybe new version of cpu-z will fix the voltage bug...but until now..no new release.. really nice rite? ps: already try with 1st bios, 0702 & 0801 |
|
|
Feb 3 2007, 12:29 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Feb 3 2007, 12:13 AM) maybe new version of cpu-z will fix the voltage bug...but until now..no new release.. Alrdy try the new BIOS? Its really good and im satisfy with it. BIOSTAR geng should use it.  |
|
|
Feb 3 2007, 11:20 AM
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
yehlai.. hav new bios r.. newer version of P96ca103??..
|
|
|
Feb 3 2007, 09:36 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
if u want newer bios then download this... it's the custom bios by rebel's haven which is based on the p96ca119 beta version....
new bios P96CA119rh2 link |
|
|
Feb 4 2007, 08:31 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(DarkForce @ Feb 3 2007, 11:20 AM) yehlai.. hav new bios r.. newer version of P96ca103??.. Yes, d/l from here http://forum.lowyat.net/index.php?showtopi...post&p=10210251i tried both b4, but rebel's haven one is better for o'c. |
|
|
Feb 4 2007, 09:00 AM
|
Junior Member
379 posts Joined: Jan 2006 From: BbBangi,Miat-Easa 
|
Hello
I just buy 965pt to pair it with nakata 6600es (u all poison me) So any headstart for me as im new in oc. my spec is e6600+965pt+xp90+Icute450+1gigApacer ddr2(BZZ chip) |
|
|
Feb 4 2007, 09:11 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(pal33x @ Feb 4 2007, 09:00 AM) Hello Dont o'c with i-Cute PSU. It might burn ur mobo.I just buy 965pt to pair it with nakata 6600es (u all poison me) So any headstart for me as im new in oc. my spec is e6600+965pt+xp90+Icute450+1gigApacer ddr2(BZZ chip) Even if u o'c it too, u cant achieve stable clock or cant o'c too much becoz PSU rail is not stable. This post has been edited by yehlai: Feb 4 2007, 09:14 AM |
|
|
Feb 4 2007, 09:13 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(pal33x @ Feb 4 2007, 09:00 AM) Hello damn nice, ehh ur psu worr I just buy 965pt to pair it with nakata 6600es (u all poison me) So any headstart for me as im new in oc. my spec is e6600+965pt+xp90+Icute450+1gigApacer ddr2(BZZ chip) later might burn all ur precious rig, IMO |
|
|
Feb 4 2007, 09:27 AM
|
|
Junior Member
379 posts Joined: Jan 2006 From: BbBangi,Miat-Easa
|
QUOTE(gengstapo @ Feb 4 2007, 09:13 AM) damn nice, ehh ur psu worr i got cm xtreme 380...izzit ok? later might burn all ur precious rig, IMO y fren oc his x2 with icute no prob. Btw i dun want to oc like kvm la oc till 2.8~3 oredi enuf |
|
|
Feb 4 2007, 09:39 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(pal33x @ Feb 4 2007, 09:27 AM) i got cm xtreme 380...izzit ok? 3GHz is impossible for iCute. I was i-Cute user b4. y fren oc his x2 with icute no prob. Btw i dun want to oc like kvm la oc till 2.8~3 oredi enuf Not worth to take risk. |
|
|
Feb 4 2007, 10:01 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(pal33x @ Feb 4 2007, 09:00 AM) Hello Sound like very weird"Nakata 6600ES"... I just buy 965pt to pair it with nakata 6600es (u all poison me) So any headstart for me as im new in oc. my spec is e6600+965pt+xp90+Icute450+1gigApacer ddr2(BZZ chip) I never use Icute pws b4, how much u bought this pws, if u in budget under rm170, maybe u can get a pws like me using now, u can refer my Signature.... |
|
|
Feb 5 2007, 08:51 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nakata101 @ Feb 4 2007, 10:01 AM) Sound like very weird"Nakata 6600ES"... I never use Icute pws b4, how much u bought this pws, if u in budget under rm170, maybe u can get a pws like me using now, u can refer my Signature.... nakata now got his own title for c2d...  |
|
|
Feb 5 2007, 12:23 PM
|
|
Junior Member
92 posts Joined: Jan 2003 From: Kuala Lumpur
|
hi everyone, just wan to ask u guys whether u guys hav encounter burning dvd/cd issue after overclocked the cpu ?
thks |
|
|
Feb 5 2007, 03:14 PM
|
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
QUOTE(yehlai @ Feb 4 2007, 08:31 AM) Yes, d/l from here http://forum.lowyat.net/index.php?showtopi...post&p=10210251 can use in both dlx and 965pt...?? newbie in flashing.. scared will kong my mobo..i tried both b4, but rebel's haven one is better for o'c. |
|
|
Feb 5 2007, 04:03 PM
|
Senior Member
3,239 posts Joined: Jun 2005
|
wat is lowest possible price for this mobo? thinking of upgrading...getting icthy already
this mobo can be support e4300? |
|
|
Feb 5 2007, 04:11 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(DarkForce @ Feb 5 2007, 03:14 PM) can use in both dlx and 965pt...?? newbie in flashing.. scared will kong my mobo.. Its 965PT's BIOS. It will work on the Deluxe, but you may disable the RAID function.QUOTE(toughnut @ Feb 5 2007, 04:03 PM) wat is lowest possible price for this mobo? thinking of upgrading...getting icthy already Can support E4300this mobo can be support e4300? Normal price is RM380. This post has been edited by yehlai: Feb 5 2007, 04:12 PM |
|
|
Feb 5 2007, 06:23 PM
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
do anyone know whr i can get a BIOSTAR TForce 965 PT Deluxe Edition rite now?
|
|
|
Feb 5 2007, 07:22 PM
|
Senior Member
1,279 posts Joined: May 2006 From: Klang The Royal Town
|
QUOTE(RokXIII @ Feb 5 2007, 06:23 PM) do anyone know whr i can get a BIOSTAR TForce 965 PT Deluxe Edition rite now? hard to find nowdays... but try pm irenic.. or just search his topics... |
|
|
Feb 5 2007, 08:05 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(alieamin @ Feb 5 2007, 07:22 PM) hard to find nowdays... but try pm irenic.. sold alrdy. or just search his topics... Why dont wanna get 965PT?? Actually they using same NB. Only diff is SB, and Deluxe have extra 2 SATA port. |
|
|
Feb 5 2007, 11:05 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(yehlai @ Feb 5 2007, 08:05 PM) sold alrdy. ya, i know the different between deluxe and non-deluxe, but the deluxe 1 got raid feature, so i think it may useful if use more than 1 sata hd... Why dont wanna get 965PT?? Actually they using same NB. Only diff is SB, and Deluxe have extra 2 SATA port. i think i will get the non-deluxe version la... |
|
|
Feb 6 2007, 12:24 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(RokXIII @ Feb 5 2007, 11:05 PM) ya, i know the different between deluxe and non-deluxe, but the deluxe 1 got raid feature, so i think it may useful if use more than 1 sata hd... raid or no raid it doesnt matter to mei think i will get the non-deluxe version la... what's important is teh overclockability of the mobo |
|
|
Feb 6 2007, 12:41 PM
|
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
DELUXE version are not in production now.. the replacement is 965pt iirc.. get it and smoke ur 945GM...
|
|
|
Feb 6 2007, 01:45 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 5 2007, 11:05 PM) ya, i know the different between deluxe and non-deluxe, but the deluxe 1 got raid feature, so i think it may useful if use more than 1 sata hd... how many sata hdd u wanna used???..965pt can support until 4 already...not enough??i think i will get the non-deluxe version la... |
|
|
Feb 6 2007, 02:25 PM
|
Senior Member
2,042 posts Joined: Jan 2003 From: KL
|
QUOTE(RokXIII @ Feb 5 2007, 06:23 PM) do anyone know whr i can get a BIOSTAR TForce 965 PT Deluxe Edition rite now? Duluxe version just exorted wif accessories. Nothing better than PT.QUOTE(ben_panced @ Feb 6 2007, 12:24 PM) raid or no raid it doesnt matter to me Yeah, that's the spirit. what's important is the overclockability of the mobo |
|
|
Feb 6 2007, 04:25 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(§layerXT @ Feb 6 2007, 02:25 PM) Duluxe version just exorted wif accessories. Nothing better than PT. hehhe n mostly we dont used/need the accessories |
|
|
Feb 6 2007, 10:29 PM
|
Senior Member
1,972 posts Joined: Oct 2006 From: Seberang Perai
|
noob question here,
can i know how to flash the bios? i using this board also, wana flash it with newer bios so that i can have more oc function, thanks 1st~ |
|
|
Feb 7 2007, 09:00 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(cschun86 @ Feb 6 2007, 10:29 PM) noob question here, 1st dowload the bios files from the website (official or mods)...there's 2 ways:-can i know how to flash the bios? i using this board also, wana flash it with newer bios so that i can have more oc function, thanks 1st~ Biostar 965PT mod bios link 1. bootable disket/floopy (DOS version) 2. winflash (Windows version) Flash these BIOS's at your own risk. This post has been edited by flatfinger: Feb 7 2007, 09:01 AM |
|
|
Feb 7 2007, 09:31 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(§layerXT @ Feb 6 2007, 02:25 PM) Yeah, that's the spirit. Yeah ! Biostar o'c spirit! This mobo is good. It can support me to o'c to 410FSB x9. But not so stable, i think becoz of high temp. So if wanna fully utilize its o'c potential, wc setup is a must. |
|
|
Feb 7 2007, 03:23 PM
|
|
Senior Member
1,972 posts Joined: Oct 2006 From: Seberang Perai
|
QUOTE(flatfinger @ Feb 7 2007, 09:00 AM) 1st dowload the bios files from the website (official or mods)...there's 2 ways:- Biostar 965PT mod bios link 1. bootable disket/floopy (DOS version) 2. winflash (Windows version) Flash these BIOS's at your own risk. flashing bios also got risk? how to winflash? i am sorry, newbies here.... |
|
|
Feb 7 2007, 05:32 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(cschun86 @ Feb 7 2007, 03:23 PM) flashing bios also got risk? how to winflash? i am sorry, newbies here.... u have to have winflash software... Winflash + the stilt bios link |
|
|
Feb 7 2007, 09:38 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(NoNameSign @ Feb 5 2007, 12:23 PM) hi everyone, just wan to ask u guys whether u guys hav encounter burning dvd/cd issue after overclocked the cpu ? Pls tell me further wht issue.thks QUOTE(flatfinger @ Feb 7 2007, 05:32 PM) yup..if something happen during the flashing or the flashing not finished...half way...it might result a "dead" mobo...if that happen u have to Hot flash it back...that most ppl dont wanna it to be happen... 'Half way' means pc hang while in the middle of flashing BIOS process?u have to have winflash software... Winflash + the stilt bios link 'Dead mobo' means mobo permantly damage? 'Hot flash' is wht? So many new terms for me.. need some guide pls. Thanks This post has been edited by yehlai: Feb 7 2007, 09:46 PM |
|
|
Feb 7 2007, 11:00 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
what kinda BIOS this biostar mobo use arr?
AMI, Award or .. ? |
|
|
Feb 8 2007, 12:50 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(yehlai @ Feb 7 2007, 09:38 PM) Pls tell me further wht issue. hehehe..im so lazy...go to rebel heaven for reference....here's one of dead mobo situation..read it'Half way' means pc hang while in the middle of flashing BIOS process? 'Dead mobo' means mobo permantly damage? 'Hot flash' is wht? So many new terms for me.. need some guide pls. Thanks b4 u flash ur mobo..make sure it in normal setting...not overclock setting...n make sure flashing it doesnt froze half way..if that happen...it could result dead mobo...or the bios will be unstable... QUOTE(gengstapo @ Feb 7 2007, 11:00 PM) what kinda BIOS this biostar mobo use arr? Award just like DFIAMI, Award or .. ? |
|
|
Feb 8 2007, 03:06 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
uhhuh.... long time didnt on9.... bz wit assgn...
guys.... im having prob wit my mobo... it cant detect external hdd, sometimes can detect, but then windows cant finish detecting the hdd(tried 2 ex.hdd edi, same result),... hav no prob wit pendrive or usb mouse... so i suspect it has something wrong wit usb power... and if i on my pc wit the ex.hdd connected, my comp will freeze at the green screen logo(the green screenie with logo on post)....but still, i need u guys advise.. p/s: yehlai... sorry cant post the reading lately..... vry bz... i pm u the reading later when im free... This post has been edited by PVCpipe: Feb 9 2007, 12:16 PM |
|
|
Feb 8 2007, 11:33 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(yehlai @ Feb 7 2007, 09:31 AM) Yeah ! Biostar o'c spirit! i think u shud not overlook to change the nb heatsink to a better one..This mobo is good. It can support me to o'c to 410FSB x9. But not so stable, i think becoz of high temp. So if wanna fully utilize its o'c potential, wc setup is a must. one thing is for sure, the nb is hot.. even when i replaced the stock heatsink with TT extreme spirit II and it still feels hot when i touch the hsf. u guys shud note that the TT extreme spirit II is a fully copper active heatsink and has 2 heatpipes. So to push ur cpu further imho u must provide better cooling for ur nb. |
|
|
Feb 9 2007, 03:20 AM
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I am using e6300 stock speed with zalman cnps 9700. But the load temperature for each core is around 48-50 degree. The temperature is a bit worrying me
P/S: Using Coretemp 0.94 to measure. Anyone here using the same processor as me?? And mind to tell me yours processor full load core temp?? Thanks in advance This post has been edited by -pWs-: Feb 9 2007, 03:21 AM |
|
|
Feb 9 2007, 11:15 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
mine at stock speed idle 41~44 for both core.... full load range from 45~47.... using mbm5 for temp reading...
|
|
|
Feb 9 2007, 11:24 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(PVCpipe @ Feb 9 2007, 11:15 AM) mine at stock speed idle 41~44 for both core.... full load range from 45~47.... using mbm5 for temp reading... Default speed??  Thanks a lot.... |
|
|
Feb 9 2007, 12:08 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
yup... default speed.... maybe its ur hs contact wit the proc....
|
|
|
Feb 9 2007, 12:40 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(PVCpipe @ Feb 9 2007, 12:08 PM) yup... default speed.... maybe its ur hs contact wit the proc.... Okie...Thanks broI think should be ok for my temperature |
|
|
Feb 9 2007, 03:54 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Feb 9 2007, 12:08 PM) yup... default speed.... maybe its ur hs contact wit the proc.... how's ur flashing...success?? |
|
|
Feb 10 2007, 08:51 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
@PVCpipe
Do you oc your e6300?? Mind to share ur setting here?? -pWs- |
|
|
Feb 11 2007, 06:49 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(flatfinger @ Feb 9 2007, 04:54 PM) how's ur flashing...success?? haha.... im not yet flash my mobo... eh, really dun understand la how to flash wit the award flash... yeah, for the official bios i oni use the bios update software come wit the cd... but im not brave enuf to try flashing the modded bios wit the software...takut dead mobo.... QUOTE(-pWs- @ Feb 10 2007, 09:51 PM) @PVCpipe yup... tried before.... but cannot go far coz my rams hit the wall.... manage to run 370 fsb oni... now back to default clock.... hehe Do you oc your e6300?? Mind to share ur setting here?? -pWs- .. for the setting better u ask flatfinger.... he's a pro... |
|
|
Feb 11 2007, 07:47 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I see. Because you are the one who use e6300 ...
Anyway, thanks -pWs- This post has been edited by -pWs-: Feb 11 2007, 07:49 PM |
|
|
Feb 12 2007, 07:12 AM
|
|
Junior Member
72 posts Joined: Nov 2006
|
Need to ask advice from all the Gurus.
I just bought my new rig C2D E4300 Biostar P965PT. When i tried to overclock.. i can only hit 230Mhz on my FSB. I've tried changing the VCore voltage to 1.4 and increase the FSB further but the BIOS just won't boot up. It seems to power shutdown and reboots. I heard the E4300 is an excellent overclocker....but it seems like i'm missing some steps here... Any advise on the mobo or E4300...would be greatly appreciated |
|
|
Feb 12 2007, 07:30 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(PVCpipe @ Feb 11 2007, 06:49 PM) yup... tried before.... but cannot go far coz my rams hit the wall.... manage to run 370 fsb oni... now back to default clock.... hehe im not pro maa...dont said like that... .. for the setting better u ask flatfinger.... he's a pro... QUOTE(mytescocom @ Feb 12 2007, 07:12 AM) Need to ask advice from all the Gurus. update ur bios to the latest that support E4 series (P96CA119)...then set ur memory divider to 400...the E4 series need 400 divider to be 1:1...gud luck...I just bought my new rig C2D E4300 Biostar P965PT. When i tried to overclock.. i can only hit 230Mhz on my FSB. I've tried changing the VCore voltage to 1.4 and increase the FSB further but the BIOS just won't boot up. It seems to power shutdown and reboots. I heard the E4300 is an excellent overclocker....but it seems like i'm missing some steps here... Any advise on the mobo or E4300...would be greatly appreciated This post has been edited by flatfinger: Feb 12 2007, 11:02 AM |
|
|
Feb 12 2007, 05:09 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(flatfinger @ Feb 12 2007, 07:30 AM) update ur bios to the latest that support E4 series (P96CA119)...then set ur memory divider to 400...the E4 series need 400 divider to be 1:1...gud luck... e6300 need 533 divider to be 1:1 right??-pWs- |
|
|
Feb 12 2007, 10:52 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
All pro here, i'm going to get myself this mobo, but i heard AceCombat said that if wan OC, better change the NB cooler. So, rite now, i'm aiming Thermalright HR-05, izit suitable?
Or got any other recommendation? As cheaper as better la~ Thanks! This post has been edited by RokXIII: Feb 12 2007, 10:59 PM |
|
|
Feb 13 2007, 02:10 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(-pWs- @ Feb 12 2007, 05:09 PM) e6300 need 533 divider to be 1:1 right?? yap...all E6 siries have to set 533 to get 1:1 divider....-pWs- QUOTE(RokXIII @ Feb 12 2007, 10:52 PM) All pro here, i'm going to get myself this mobo, but i heard AceCombat said that if wan OC, better change the NB cooler. So, rite now, i'm aiming Thermalright HR-05, izit suitable? Zalman ZM-NBF47 Or got any other recommendation? As cheaper as better la~ Thanks! totally beat the HR-05....its only RM38 |
|
|
Feb 13 2007, 08:14 AM
|
|
Junior Member
72 posts Joined: Nov 2006
|
QUOTE(flatfinger @ Feb 12 2007, 07:30 AM) im not pro maa...dont said like that... Thanks for the tip...i'll changed the Memory Divider from Auto to 400. update ur bios to the latest that support E4 series (P96CA119)...then set ur memory divider to 400...the E4 series need 400 divider to be 1:1...gud luck... Anything else i need to change other than 1) FSB 2) Memory divider What about 1) CPU Voltage -should i leave it to Startup or change to 1.325V ? 2) DRAM timings - Auto or manual set? 3) CPU thermal monitor -enabled or disabled? The Bios from RebelHaven )one i'm using) sets it to disable. Thanks again.. |
|
|
Feb 13 2007, 09:11 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(mytescocom @ Feb 13 2007, 08:14 AM) Thanks for the tip...i'll changed the Memory Divider from Auto to 400. 1) CPU Voltage -should i leave it to Startup or change to 1.325V ?Anything else i need to change other than 1) FSB 2) Memory divider What about 1) CPU Voltage -should i leave it to Startup or change to 1.325V ? 2) DRAM timings - Auto or manual set? 3) CPU thermal monitor -enabled or disabled? The Bios from RebelHaven )one i'm using) sets it to disable. Thanks again.. = manually...depend on ur processor need...u have to test the stability...( ur 1st target will be 9x356 = 3.2Ghz at stock voltage 1.325v) 2) DRAM timings - Auto or manual set? = manually...according to the spec n timing (mostly 4-4-4-12 for DDR2...tighten timing at high frequency is the best) 3) CPU thermal monitor -enabled or disabled? The Bios from RebelHaven )one i'm using) sets it to disable. = all cpu feature are set to disable (so it wouldn't disturb ur overcloking) for stability purpose maybe u can increase 1 step ur Vmch...(put fan blow at it will be nice) others...pls monitor ur proc temperatures...ur psu +12 vrail... after consider all the setting...run orthos prime..using blend test...if it can stable around 6 hours plus...then ur setting is gud... happy overclocking***FYI...currently for E4 siries on TF 965PT...max fsb hit is 400 on phase cooling...others normally will wall at 360fsb...hopefully ur E4 will be a nice overclock processor...others info...week 40 batch will mostly clock at 3.4Ghz...week 41 around 3.2Ghz... This post has been edited by flatfinger: Feb 13 2007, 09:57 AM |
|
|
Feb 13 2007, 03:00 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(flatfinger @ Feb 13 2007, 02:10 AM) yap...all E6 siries have to set 533 to get 1:1 divider.... Thanks |
|
|
Feb 13 2007, 08:12 PM
|
|
Junior Member
72 posts Joined: Nov 2006
|
QUOTE(flatfinger @ Feb 13 2007, 09:11 AM) 1) CPU Voltage -should i leave it to Startup or change to 1.325V ? Thanks for the tips..= manually...depend on ur processor need...u have to test the stability...( ur 1st target will be 9x356 = 3.2Ghz at stock voltage 1.325v) 2) DRAM timings - Auto or manual set? = manually...according to the spec n timing (mostly 4-4-4-12 for DDR2...tighten timing at high frequency is the best) 3) CPU thermal monitor -enabled or disabled? The Bios from RebelHaven )one i'm using) sets it to disable. = all cpu feature are set to disable (so it wouldn't disturb ur overcloking) for stability purpose maybe u can increase 1 step ur Vmch...(put fan blow at it will be nice) others...pls monitor ur proc temperatures...ur psu +12 vrail... after consider all the setting...run orthos prime..using blend test...if it can stable around 6 hours plus...then ur setting is gud... happy overclocking***FYI...currently for E4 siries on TF 965PT...max fsb hit is 400 on phase cooling...others normally will wall at 360fsb...hopefully ur E4 will be a nice overclock processor...others info...week 40 batch will mostly clock at 3.4Ghz...week 41 around 3.2Ghz... Another info...i'm using Corsair value DDR2 2x512 667Mhz. Should the divider be changed to 400Mhz. I noticed if i increased the processor FSB, the memory mhz will increased as well -based on CPUZ. Is there a way to lock the DDR2 memory to 667Mhz? I want to OC the e4300 to 333FSB with the DDR2 at 667Mhz as well. I also noticed tht when OC the CPU FSB to 250..my temperature is arounf 41-42 at idle...50+ when at full load (check with Biostar Hardware Monitor). Is this normal? Thanks again. |
|
|
Feb 13 2007, 09:19 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Any1 using 3rd party s/w to OC? Or jus OC in the bios? Since the Biostar built-in software "T-Utility Over Clock" look so "nice" and without any guide, i dunno how to OC rite now...
Plus, the "T-Utility Hardware Monitor" will give me a wrong result for the temp and voltage. It is not accurate at all! What's the problem actually? This post has been edited by RokXIII: Feb 13 2007, 09:20 PM |
|
|
Feb 14 2007, 08:34 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(mytescocom @ Feb 13 2007, 08:12 PM) Thanks for the tips.. Another info...i'm using Corsair value DDR2 2x512 667Mhz. Should the divider be changed to 400Mhz. I noticed if i increased the processor FSB, the memory mhz will increased as well -based on CPUZ. Is there a way to lock the DDR2 memory to 667Mhz? I want to OC the e4300 to 333FSB with the DDR2 at 667Mhz as well. I also noticed tht when OC the CPU FSB to 250..my temperature is arounf 41-42 at idle...50+ when at full load (check with Biostar Hardware Monitor). Is this normal? Thanks again. QUOTE(RokXIII @ Feb 13 2007, 09:19 PM) Any1 using 3rd party s/w to OC? Or jus OC in the bios? Since the Biostar built-in software "T-Utility Over Clock" look so "nice" and without any guide, i dunno how to OC rite now... most ppl using bios setup setting to overclock...than using program like clockgen and memset in windows to fine tune it... Plus, the "T-Utility Hardware Monitor" will give me a wrong result for the temp and voltage. It is not accurate at all! What's the problem actually? ***both of u...pls read Fundamentals Of Overclocking to make sure u understand the basic 1st....link This post has been edited by flatfinger: Feb 14 2007, 08:38 AM |
|
|
Feb 14 2007, 02:11 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Feb 14 2007, 08:34 AM) most ppl using bios setup setting to overclock...than using program like clockgen and memset in windows to fine tune it... sorry for that... ***both of u...pls read Fundamentals Of Overclocking to make sure u understand the basic 1st....link  So, the latest bios verson should be P96CA119rh2, rite? I refer to the Rebels Haven's website. Now mine is using the P96ca914bs which is the 1st released version, so can I upgrade to the latest version directly? |
|
|
Feb 14 2007, 03:06 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 14 2007, 02:11 PM) sorry for that... yup latest is 119rh2...i already used it.. So, the latest bios verson should be P96CA119rh2, rite? I refer to the Rebels Haven's website. Now mine is using the P96ca914bs which is the 1st released version, so can I upgrade to the latest version directly?  |
|
|
Feb 14 2007, 05:52 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Just tried to OC from 1.86 to 2.33 (333 x 7), not able to go higher due to my sucking RAM limited me... I cant go higher than this since when the RAM speed higher than 667MHz, errors will occur definitely...
I discover another problem is, even I ald OC till 2.33, but the CPU-Z 1.38 just show me 333 x 6 which is only 1999GHz... Then, it will show me I'm using 965PT Deluxe Edition but I'm not.One more thing, I cant run TAT at all, have anyone encounter the problem same like me?  Therefore, I use CoreTemp to read the temperature, guess wat, it show me 43C at idle temp. I don't think it is accurate coz my previous mobo, Gigabyte 945GM show me 48C at idle....Honestly, why so many problems happen to me. Is the mobo problem? Or just the software compatibility problem? |
|
|
Feb 14 2007, 07:36 PM
|
|
Junior Member
72 posts Joined: Nov 2006
|
QUOTE(RokXIII @ Feb 14 2007, 05:52 PM) Just tried to OC from 1.86 to 2.33 (333 x 7), not able to go higher due to my sucking RAM limited me... I cant go higher than this since when the RAM speed higher than 667MHz, errors will occur definitely... Try setting ur memory frequency in BIOS to 400Mhz. Set the CPU voltage to 1.325, FSB to 333. You should be able to go.I discover another problem is, even I ald OC till 2.33, but the CPU-Z 1.38 just show me 333 x 6 which is only 1999GHz... Then, it will show me I'm using 965PT Deluxe Edition but I'm not.One more thing, I cant run TAT at all, have anyone encounter the problem same like me? Therefore, I use CoreTemp to read the temperature, guess wat, it show me 43C at idle temp. I don't think it is accurate coz my previous mobo, Gigabyte 945GM show me 48C at idle....Honestly, why so many problems happen to me. Is the mobo problem? Or just the software compatibility problem? |
|
|
Feb 14 2007, 08:36 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(mytescocom @ Feb 14 2007, 07:36 PM) Try setting ur memory frequency in BIOS to 400Mhz. Set the CPU voltage to 1.325, FSB to 333. You should be able to go. there are no 400MHz, just got auto, 533(1:1), 667, and 800 only. 1.325 seems like too low, cant even boot into window. Just now prime with orthos, system not stable at all, not sure what is the problems. So, i tried to increase the vcore to 1.4v, vdimm to 2.0, errors still occur.... |
|
|
Feb 14 2007, 09:14 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
wat i know is 400mhz oni for e4xxx oni.... for e6xxx is 533.... erm hav u check ur ram timing... maybe bad timing...
|
|
|
Feb 14 2007, 10:26 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(RokXIII @ Feb 14 2007, 08:36 PM) there are no 400MHz, just got auto, 533(1:1), 667, and 800 only. why dun just up ur vdimm to 2.2v... most ddr2 can handle that vdimm without a fuss i think. 1.325 seems like too low, cant even boot into window. Just now prime with orthos, system not stable at all, not sure what is the problems. So, i tried to increase the vcore to 1.4v, vdimm to 2.0, errors still occur.... |
|
|
Feb 15 2007, 12:07 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(PVCpipe @ Feb 14 2007, 09:14 PM) wat i know is 400mhz oni for e4xxx oni.... for e6xxx is 533.... erm hav u check ur ram timing... maybe bad timing... sorry, might to explain wat is bad timing?QUOTE(ben_panced @ Feb 14 2007, 10:26 PM) why dun just up ur vdimm to 2.2v... most ddr2 can handle that vdimm without a fuss i think. ya, most the ram can function even at 2.2 vdimm, actually i dun think it is necessary need to set it at 2.2v, but anyway, i will try at 2moro. Thanks ur advice! |
|
|
Feb 15 2007, 08:41 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 14 2007, 05:52 PM) Just tried to OC from 1.86 to 2.33 (333 x 7), not able to go higher due to my sucking RAM limited me... I cant go higher than this since when the RAM speed higher than 667MHz, errors will occur definitely... cpu-z 1.39 updateI discover another problem is, even I ald OC till 2.33, but the CPU-Z 1.38 just show me 333 x 6 which is only 1999GHz... Then, it will show me I'm using 965PT Deluxe Edition but I'm not.---it's cpu-z info mobo info..no need to worries...mine are the same (refer screenshot)....new update available now... ---pls disable all cpu feature in bios..so it wont change ur multiplier  One more thing, I cant run TAT at all, have anyone encounter the problem same like me? Therefore, I use CoreTemp to read the temperature, guess wat, it show me 43C at idle temp. I don't think it is accurate coz my previous mobo, Gigabyte 945GM show me 48C at idle....---To all Biostar TF 965PT...TAT wont be able to run..its not ur mobo problem..its incompatible of the software itself with the mobo... ---if u OC..ur cpu will be hotter...i recommended u using everest ultimate edition to monitor it (refer on the upper rite my screenshot) ---1 more thing pls make sure ur cpu heatsink has been attached nicely Honestly, why so many problems happen to me. Is the mobo problem? Or just the software compatibility problem? Download Link This post has been edited by flatfinger: Feb 15 2007, 09:10 AM |
|
|
Feb 15 2007, 09:22 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Feb 15 2007, 08:41 AM) thanks for explanation, i will try it after the school... |
|
|
Feb 15 2007, 09:39 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 15 2007, 09:22 AM) thanks for explanation, i will try it after the school... gambatte |
|
|
Feb 15 2007, 06:52 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
@flatfinger, I just followed wat u said to disable all the the CPU features, but the CPU-Z still showing me the multiplier is x6, not x7....
Which 1 should I refer to???  This post has been edited by RokXIII: Feb 15 2007, 09:21 PM |
|
|
Feb 15 2007, 10:09 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Haha today i met TS, kvmcom and rlhc17. Wao so lucky, they are senior overclocker. Can clock their gpu to extreme.
They are so friendly hope brother rlhc17 can gimme the 2.4v vMod module la haha This post has been edited by yehlai: Feb 15 2007, 10:28 PM |
|
|
Feb 16 2007, 02:48 AM
|
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
to all sifu's here.. hav 1 Q here..
issit suitable to use 512 DDR800 x 4 stick on 965pt.. affected OC or not?? |
|
|
Feb 16 2007, 10:05 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 15 2007, 06:52 PM) @flatfinger, I just followed wat u said to disable all the the CPU features, but the CPU-Z still showing me the multiplier is x6, not x7.... set the multiplier manually in bios...set it to 7... Which 1 should I refer to??? This post has been edited by flatfinger: Feb 16 2007, 10:06 AM |
|
|
Feb 16 2007, 11:53 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Feb 16 2007, 10:05 AM) set the multiplier manually in bios...set it to 7... I tried to ask the same questions in Rebel's forum, what answer i got is maybe it is thw windows problems, probably some applications reduce the multiplier. Luckily it is not the mobo problem otherwise need take it bakc to RMA.... I'll will try to reinstall the OS c what will happen... |
|
|
Feb 16 2007, 02:35 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 16 2007, 11:53 AM) I tried to ask the same questions in Rebel's forum, what answer i got is maybe it is thw windows problems, probably some applications reduce the multiplier. try set manually in bios 1st..i think it should solved it..Luckily it is not the mobo problem otherwise need take it bakc to RMA.... I'll will try to reinstall the OS c what will happen... |
|
|
Feb 16 2007, 02:39 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Feb 16 2007, 02:35 PM) try set manually in bios 1st..i think it should solved it.. I tried it ald, cant solve.... |
|
|
Feb 16 2007, 02:41 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 16 2007, 02:39 PM) I tried it ald, cant solve.... this is weird...its there any program u running?? any background program??r u sure u disable al of this  This post has been edited by flatfinger: Feb 16 2007, 02:46 PM |
|
|
Feb 16 2007, 04:56 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(DarkForce @ Feb 16 2007, 02:48 AM) to all sifu's here.. hav 1 Q here.. i dun think using 4x512 is a great idea.. afaik u cannot oc far so if u want to oc i better off using 2x1gbissit suitable to use 512 DDR800 x 4 stick on 965pt.. affected OC or not?? |
|
|
Feb 16 2007, 07:35 PM
|
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
yeah.. i think so.. but 1gbx2 stick is kinda pricey nowdays..
|
|
|
Feb 18 2007, 03:02 PM
|
Senior Member
1,496 posts Joined: Jan 2006 From: Baling, Kedah
|
QUOTE(RokXIII @ Feb 16 2007, 02:39 PM) I tried it ald, cant solve.... bro, so far how high u oc the proc? |
|
|
Feb 21 2007, 04:58 PM
|
|
Junior Member
16 posts Joined: Aug 2006 From: Sg besi, kuala lumpur
|
QUOTE(RokXIII @ Feb 16 2007, 02:39 PM) I tried it ald, cant solve.... i also have prob with multiplier before..all u got to do is go to control panel-power option-on power schemes set it to always on..ur multiplier will be back to normal.. my thread |
|
|
Feb 21 2007, 11:01 PM
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
try to look for this mobo at many stores.. still got no stock.. only tf 945 left..  |
|
|
Feb 21 2007, 11:05 PM
|
Senior Member
788 posts Joined: Oct 2005 From: latitude 4.58635°N, longitude 101.1076°E
|
btw.. how much this mobo price now?? the latest is RM395 rite ?
|
|
|
Feb 21 2007, 11:17 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
haha 965PT is nice
my new result is 3.773GHz check my siggy |
|
|
Feb 21 2007, 11:51 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(Devilc0de @ Feb 21 2007, 11:05 PM) btw.. how much this mobo price now?? the latest is RM395 rite ? latest i saw on ATE price list is rm388 kot.. im also trying to get one.. but susah cari la.. most shop finished stock olredi. looking fwd to get the deluxe one..still, can i know where to get the deluxe one? |
|
|
Feb 22 2007, 09:39 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nazerry @ Feb 21 2007, 11:51 PM) latest i saw on ATE price list is rm388 kot.. im also trying to get one.. but susah cari la.. most shop finished stock olredi. looking fwd to get the deluxe one.. deluxe one will not been produce anymore..still, can i know where to get the deluxe one? |
|
|
Feb 22 2007, 06:05 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(flatfinger @ Feb 22 2007, 09:39 AM) deluxe one will not been produce anymore.. too bad this good mobo cant do raid. |
|
|
Feb 22 2007, 07:46 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(nazerry @ Feb 22 2007, 06:05 PM) too bad this good mobo cant do raid. You meant 965Deluxe cannot do raid? AFAIK, I think can do raid. Correct me if i am wrong -pWs- |
|
|
Feb 22 2007, 10:52 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(-pWs- @ Feb 22 2007, 07:46 PM) You meant 965Deluxe cannot do raid? AFAIK, I think can do raid. Correct me if i am wrong i think he meant the tforce 965pt not the tforce p965 deluxe which has the ich8r southbridge. -pWs- |
|
|
Feb 22 2007, 11:02 PM
|
|
Senior Member
788 posts Joined: Oct 2005 From: latitude 4.58635°N, longitude 101.1076°E
|
what is different between 965pt and tforce p965 deluxe ??
|
|
|
Feb 22 2007, 11:06 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(Devilc0de @ Feb 22 2007, 11:02 PM) what is different between 965pt and tforce p965 deluxe ?? PT ver dont have RAID feat. while Deluxe ver, havethat whats member here tell since they oledi used it |
|
|
Feb 23 2007, 08:50 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(Devilc0de @ Feb 22 2007, 11:02 PM) what is different between 965pt and tforce p965 deluxe ?? 965PT no raid support up to 8GB memory 4 x Serial ATA 965DLX have raid support up to 4GB memory 6 x Serial ATA |
|
|
Feb 23 2007, 11:17 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Deluxe support 4GB memory only?
Only 2 RAM slot? |
|
|
Feb 23 2007, 05:02 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(Zulhuzairi @ Feb 21 2007, 04:58 PM) i also have prob with multiplier before.. Ya, will try it once go back to KL, currently at hometown. thanks! all u got to do is go to control panel-power option-on power schemes set it to always on..ur multiplier will be back to normal.. my thread QUOTE(yehlai @ Feb 23 2007, 11:17 AM) Deluxe support 4GB memory only? got 4 RAM slots, maximum 1GB for each slots... So total will be 4GB only...Only 2 RAM slot? This post has been edited by RokXIII: Feb 23 2007, 05:04 PM |
|
|
Feb 23 2007, 05:35 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 23 2007, 05:02 PM) Ya, will try it once go back to KL, currently at hometown. thanks! yup..n for PT...1 slot can support 2GB..so max is 8GB.. got 4 RAM slots, maximum 1GB for each slots... So total will be 4GB only... |
|
|
Feb 24 2007, 04:14 PM
|
|
Senior Member
788 posts Joined: Oct 2005 From: latitude 4.58635°N, longitude 101.1076°E
|
QUOTE(flatfinger @ Feb 23 2007, 06:35 PM) yup..n for PT...1 slot can support 2GB..so max is 8GB.. so PT is better from DLX ? i wanna get i PT mobo dis monday from my supplier for my friend |
|
|
Feb 24 2007, 04:35 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
so now, i got my T-Utility fan states my cpu temp is 25C.. quite suprising coz using previous asus mobo, the temp was 40c! but when i tried speedfan, the temp is 127c?? how to fix this?
edit: how i can get my fsb:dram ratio to 1:1, currently it's 1:2. coz when i increase the fsb freq, the ram freq also increase. pening la! This post has been edited by nazerry: Feb 24 2007, 05:16 PM |
|
|
Feb 24 2007, 06:43 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(Devilc0de @ Feb 24 2007, 04:14 PM) so PT is better from DLX ? i wanna get i PT mobo dis monday from my supplier for my friend 965PT is good enuf i think.But from supplier ? Its Cheaper ? |
|
|
Feb 24 2007, 06:44 PM
|
|
Senior Member
788 posts Joined: Oct 2005 From: latitude 4.58635°N, longitude 101.1076°E
|
QUOTE(yehlai @ Feb 24 2007, 07:43 PM) 965PT is good enuf i think. my supplier.. can get around RM370 .. need to check if they still have the stock But from supplier ? Its Cheaper ? |
|
|
Feb 24 2007, 07:08 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(nazerry @ Feb 24 2007, 04:35 PM) so now, i got my T-Utility fan states my cpu temp is 25C.. quite suprising coz using previous asus mobo, the temp was 40c! but when i tried speedfan, the temp is 127c?? how to fix this? e6 series need 533 ram divider to make it 1:1edit: how i can get my fsb:dram ratio to 1:1, currently it's 1:2. coz when i increase the fsb freq, the ram freq also increase. pening la! For e4 series, it needs 400 ram divider. Hope this helps u -pWs- |
|
|
Feb 24 2007, 08:17 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(-pWs- @ Feb 24 2007, 07:08 PM) e6 series need 533 ram divider to make it 1:1 aw shoot.. im using p4 onli meeh! huhu.. For e4 series, it needs 400 ram divider. Hope this helps u -pWs- PC2-4300 512ram. waa!! my rig sux meeh! huhu.. so how aa?This post has been edited by nazerry: Feb 25 2007, 03:43 PM |
|
|
Feb 26 2007, 09:26 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nazerry @ Feb 24 2007, 08:17 PM) aw shoot.. im using p4 onli meeh! huhu.. set memory timing kat 533...tak leh dpt 1:1??? sebab ram hang 266Mhz kan... PC2-4300 512ram. waa!! my rig sux meeh! huhu.. so how aa? |
|
|
Feb 26 2007, 10:36 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
When i try to run a full scan of virus by Kaspersky, my comp will hang or restart, is tat mean it is not stable enough?
I OC it from 1.86 to 2.33 with the default vcore(1.325) and 2.2 vdimm. Should I increase the vcore? But thr got no problem when i played game(Marvel:Ultimade Alliance), no hang or restart... |
|
|
Feb 26 2007, 10:42 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 26 2007, 10:36 AM) When i try to run a full scan of virus by Kaspersky, my comp will hang or restart, is tat mean it is not stable enough? most of c2d can go 3.0Ghz above with stock vcore (1.325v)...not need to increase vcore if only 2.33Ghz...im really not sure what is ur problem I OC it from 1.86 to 2.33 with the default vcore(1.325) and 2.2 vdimm. Should I increase the vcore? But thr got no problem when i played game(Marvel:Ultimade Alliance), no hang or restart... ..it might be due to ur ram... |
|
|
Feb 26 2007, 01:47 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Feb 26 2007, 10:42 AM) most of c2d can go 3.0Ghz above with stock vcore (1.325v)...not need to increase vcore if only 2.33Ghz...im really not sure what is ur problem I also feel weird when asking such question... ..it might be due to ur ram... Coz before I OC, i can run kaspersky very smoothly, but after OC, it will hang or restart like wat i said before. So, i assume that it is due to the low vcore problem... |
|
|
Feb 26 2007, 03:55 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(RokXIII @ Feb 26 2007, 01:47 PM) I also feel weird when asking such question... Might be vCore too low. U can run Orthos Prime to test out the stabaility of ur setting. Sometime could be RAM prob, clock speed too high or vDimm too low. Or either NB voltage or NB too hot.. 965PT's NB is quite hot actually. Many possible... Coz before I OC, i can run kaspersky very smoothly, but after OC, it will hang or restart like wat i said before. So, i assume that it is due to the low vcore problem... Do some troubleshoot with Orthos b4 run 24/7. This post has been edited by yehlai: Feb 26 2007, 03:58 PM |
|
|
Feb 26 2007, 04:25 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
anybody using speedfan to monitor this mobo temp? did u guys get the temp right? i cant get the temp for cpu right.. it reads 127! need it any mod on the config?
|
|
|
Feb 26 2007, 05:09 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(yehlai @ Feb 26 2007, 03:55 PM) Might be vCore too low. U can run Orthos Prime to test out the stabaility of ur setting. Sometime could be RAM prob, clock speed too high or vDimm too low. Or either NB voltage or NB too hot.. 965PT's NB is quite hot actually. Many possible... Just prime it but not stable, error occur just for few minutes, i think should be the low vcore problem....Do some troubleshoot with Orthos b4 run 24/7. RAM should be ok i think, since i ald set it to 2.2v, timing 5-5-5-15. QUOTE(nazerry @ Feb 26 2007, 04:25 PM) anybody using speedfan to monitor this mobo temp? did u guys get the temp right? i cant get the temp for cpu right.. it reads 127! need it any mod on the config? I nvr trust what i see from speedfan, it nvr provide me an accurate result.... |
|
|
Feb 26 2007, 05:27 PM
|
|
Junior Member
72 posts Joined: Nov 2006
|
My C2D rig. E4300 C2D -OC to 3015Mhz (335x9) 2x512MB 667Mhz DDR2 Corsair Biostar TForce 965PT 250GB WD HDD ACBEL 450W PSU Here's how i did it. (A basic guide to help those with problems) 1) Updated the latest bios from RebelHaven. 2) Use Overclock Manual 3) Set the VCore to 1.3125 4) Set Memory Frequency to 400Mhz -to achieve 1:1 timing with the E4300 procesor 5) Set the Memory voltage to 2 6) Memory SPD set to 4-4-4-12- the rest auto (you can leave all to auto) 7) Set the CPU FSB to 335 At idle - temperature is at around 39-41 'C At full load (running Prime stress and SuperPI together) -temperature is at around 48~52 'C However i do have one small problem.... my usb port doesn't seem to supply enough to my portable HDD. I need to use a DC adapter then it'll work. I don;t face this problem on my old P4 rig. Is there any thing wrong with the MOBO with the USB power? |
|
|
Feb 26 2007, 06:14 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
[
 QUOTE(mytescocom @ Feb 26 2007, 05:27 PM) My C2D rig. Hey Great ! 1st E4300 with 965PT here. E4300 C2D -OC to 3015Mhz (335x9) 2x512MB 667Mhz DDR2 Corsair Biostar TForce 965PT 250GB WD HDD ACBEL 450W PSU Here's how i did it. (A basic guide to help those with problems) 1) Updated the latest bios from RebelHaven. 2) Use Overclock Manual 3) Set the VCore to 1.3125 4) Set Memory Frequency to 400Mhz -to achieve 1:1 timing with the E4300 procesor 5) Set the Memory voltage to 2 6) Memory SPD set to 4-4-4-12- the rest auto (you can leave all to auto) 7) Set the CPU FSB to 335 At idle - temperature is at around 39-41 'C At full load (running Prime stress and SuperPI together) -temperature is at around 48~52 'C However i do have one small problem.... my usb port doesn't seem to supply enough to my portable HDD. I need to use a DC adapter then it'll work. I don;t face this problem on my old P4 rig. Is there any thing wrong with the MOBO with the USB power? Looking forward for your o'c result try 3.6GHz ?Edit: About the HDD prob, maybe u can use 2 USB port to run the portable HDD. This post has been edited by yehlai: Feb 26 2007, 06:16 PM |
|
|
Feb 26 2007, 07:25 PM
|
|
Junior Member
72 posts Joined: Nov 2006
|
QUOTE(yehlai @ Feb 26 2007, 06:14 PM) [ 3.6Ghz.... not too keen on it bro......just only for bragging rites. Running only on stock heatsink.... Hey Great ! 1st E4300 with 965PT here. Looking forward for your o'c result try 3.6GHz ?Edit: About the HDD prob, maybe u can use 2 USB port to run the portable HDD. wanna prolong my baby longer.... scared to overstretch her.I've tried with 2 USB...one is DC adapter..... but i don;t understand why it works with 1 USB on my old P4, MSI boardP722 and normal PSU. Is there a problem with Biostar 965 with 80gb portable HDD? My 40GB works just fine. Added on February 26, 2007, 7:31 pm QUOTE(yehlai @ Feb 26 2007, 06:14 PM) [ What screenshots do i need to post my O/C results? Havn't posted OC results b4..so pls do pardon me.Hey Great ! 1st E4300 with 965PT here. Looking forward for your o'c result try 3.6GHz ?Edit: About the HDD prob, maybe u can use 2 USB port to run the portable HDD. I noticed a lot of ppl post the CPU temp after they have completed their stress stress.... it kinda drops 5-10 'Celcius or even more after the stress test. I'll try to post mine in middle of da "Fever". Cheers This post has been edited by mytescocom: Feb 26 2007, 07:31 PM |
|
|
Feb 26 2007, 08:09 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(mytescocom @ Feb 26 2007, 07:25 PM) 3.6Ghz.... not too keen on it bro......just only for bragging rites. Running only on stock heatsink.... are u using the stock NB's heatsink? wanna prolong my baby longer.... scared to overstretch her.I've tried with 2 USB...one is DC adapter..... but i don;t understand why it works with 1 USB on my old P4, MSI boardP722 and normal PSU. Is there a problem with Biostar 965 with 80gb portable HDD? My 40GB works just fine. Added on February 26, 2007, 7:31 pm What screenshots do i need to post my O/C results? Havn't posted OC results b4..so pls do pardon me. I noticed a lot of ppl post the CPU temp after they have completed their stress stress.... it kinda drops 5-10 'Celcius or even more after the stress test. I'll try to post mine in middle of da "Fever". Cheers |
|
|
Feb 26 2007, 09:51 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(RokXIII @ Feb 26 2007, 08:09 PM) are u using the stock NB's heatsink? i think for fsb lower than 400, i think the stock hs shud do the work fine becoz the nb isn't stressed too much |
|
|
Feb 26 2007, 11:01 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(yehlai @ Feb 26 2007, 07:14 PM) [ i also face the same prob... dunno wether its the mobo prob or what.... yeah.. it seems the usb port cant supply enuf power to the hdd....Hey Great ! 1st E4300 with 965PT here. Looking forward for your o'c result try 3.6GHz ?Edit: About the HDD prob, maybe u can use 2 USB port to run the portable HDD. |
|
|
Feb 27 2007, 12:08 AM
|
|
Junior Member
72 posts Joined: Nov 2006
|
QUOTE(RokXIII @ Feb 26 2007, 08:09 PM) are u using the stock NB's heatsink? Yup...i'm using stock heatsink.Added on February 27, 2007, 12:36 am QUOTE(mytescocom @ Feb 26 2007, 05:27 PM) My C2D rig. Update-- running Orthos, Biostar T-Utility shows 63-65 'Celcius. E4300 C2D -OC to 3015Mhz (335x9) 2x512MB 667Mhz DDR2 Corsair Biostar TForce 965PT 250GB WD HDD ACBEL 450W PSU Here's how i did it. (A basic guide to help those with problems) 1) Updated the latest bios from RebelHaven. 2) Use Overclock Manual 3) Set the VCore to 1.3125 4) Set Memory Frequency to 400Mhz -to achieve 1:1 timing with the E4300 procesor 5) Set the Memory voltage to 2 6) Memory SPD set to 4-4-4-12- the rest auto (you can leave all to auto) 7) Set the CPU FSB to 335 At idle - temperature is at around 39-41 'C At full load (running Prime stress and SuperPI together) -temperature is at around 48~52 'C My Vcore is at 1.3125, FSB is 335*9 This post has been edited by mytescocom: Feb 27 2007, 12:36 AM |
|
|
Feb 27 2007, 05:37 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(mytescocom @ Feb 27 2007, 12:08 AM) Yup...i'm using stock heatsink. Biostar T-Utility actually given the lower temperature, if read in coretemp or TAT, the temp should around 71-73C...Added on February 27, 2007, 12:36 am Update-- running Orthos, Biostar T-Utility shows 63-65 'Celcius. My Vcore is at 1.3125, FSB is 335*9 Too bad, this mobo cant run TAT at all, coretemp always giving me some errors... |
|
|
Feb 27 2007, 09:32 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 27 2007, 05:37 AM) Biostar T-Utility actually given the lower temperature, if read in coretemp or TAT, the temp should around 71-73C... Used Everest Ultimate Edition to monitor ur temp n others....its seems very compatible with 965PT...for me it show same temp as in bios n coretemp read...Too bad, this mobo cant run TAT at all, coretemp always giving me some errors... This post has been edited by flatfinger: Feb 27 2007, 09:36 AM |
|
|
Feb 27 2007, 12:10 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(PVCpipe @ Feb 26 2007, 11:01 PM) i also face the same prob... dunno wether its the mobo prob or what.... yeah.. it seems the usb port cant supply enuf power to the hdd.... Hey why dont wanna oc ur E63? U got a nice cooler and a 965PT. Give it a try See how far ur proc can go with stock vCore. This post has been edited by yehlai: Feb 27 2007, 12:11 PM |
|
|
Feb 27 2007, 05:01 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(flatfinger @ Feb 26 2007, 09:26 AM) set memory timing kat 533...tak leh dpt 1:1??? sebab ram hang 266Mhz kan... xleh gak ler.. ram266, dah set memory timing kat 533, tapi xdapat gak 1:1. ram timing 4-4-4-12QUOTE(flatfinger @ Feb 27 2007, 09:32 AM) Used Everest Ultimate Edition to monitor ur temp n others....its seems very compatible with 965PT...for me it show same temp as in bios n coretemp read... tenkiu! tapi appearance dia xcun la.. huhu.. klu pkai speedfan, leh wat widget. tapi speedfan bodo x read temp betul.. if anyone doloded config for dis mobo, plz inform! |
|
|
Feb 28 2007, 10:41 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nazerry @ Feb 27 2007, 05:01 PM) xleh gak ler.. ram266, dah set memory timing kat 533, tapi xdapat gak 1:1. ram timing 4-4-4-12 tak cun ke?? tenkiu! tapi appearance dia xcun la.. huhu.. klu pkai speedfan, leh wat widget. tapi speedfan bodo x read temp betul.. if anyone doloded config for dis mobo, plz inform! kekekke..akuk nyer letak kat atas kanan tuh...cun je |
|
|
Feb 28 2007, 03:36 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
is there any software to read the temperature for the NB and SB?
|
|
|
Feb 28 2007, 05:02 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Feb 28 2007, 03:36 PM) is there any software to read the temperature for the NB and SB? none for NB ...but the mobo sensor is near SB.. |
|
|
Feb 28 2007, 05:37 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(flatfinger @ Feb 28 2007, 10:41 AM) tak cun ke?? uih! bley tuka skin ke? huhu.. mm.. ok ok care aa tu.. mari dolod! kekekke..akuk nyer letak kat atas kanan tuh...cun je |
|
|
Feb 28 2007, 10:35 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(flatfinger @ Feb 27 2007, 09:32 AM) Used Everest Ultimate Edition to monitor ur temp n others....its seems very compatible with 965PT...for me it show same temp as in bios n coretemp read... on the contrary not for me..because the temp reading when i primed my cpu for both core that everest gave me is not the same with the temp showed by coretemp |
|
|
Mar 1 2007, 05:18 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(ben_panced @ Feb 28 2007, 10:35 PM) on the contrary not for me.. so what software u'r using?because the temp reading when i primed my cpu for both core that everest gave me is not the same with the temp showed by coretemp |
|
|
Mar 1 2007, 01:15 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
right now to measure the core temperature i use coretemp which i think the reading is more accurate than everest.
|
|
|
Mar 1 2007, 03:37 PM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(yehlai @ Feb 27 2007, 01:10 PM) Hey why dont wanna oc ur E63? hehe.... rite now my rams can do max 370m fsb.... plus want to hav a better nb heatsink first... U got a nice cooler and a 965PT. Give it a try See how far ur proc can go with stock vCore. |
|
|
Mar 1 2007, 04:14 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(PVCpipe @ Mar 1 2007, 03:37 PM) hehe.... rite now my rams can do max 370m fsb.... plus want to hav a better nb heatsink first... Meant DDR640???-pWs- |
|
|
Mar 1 2007, 06:14 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(ben_panced @ Mar 1 2007, 01:15 PM) right now to measure the core temperature i use coretemp which i think the reading is more accurate than everest. ermm..but for me everest n coretemp is synchronize together.. |
|
|
Mar 1 2007, 07:36 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(PVCpipe @ Mar 1 2007, 03:37 PM) hehe.... rite now my rams can do max 370m fsb.... plus want to hav a better nb heatsink first... do u mean u OC by using the stock NB heat sink? wow, i not dare to do so since i heard some1 said the stock NB heat sink perform so weak, worry it will burn.... QUOTE(flatfinger @ Mar 1 2007, 06:14 PM) ermm..but for me everest n coretemp is synchronize together.. everest can give me the correct temp reading jus like coretemp, but the voltage 1 is incorrect at all... Conclusion, i dun use everest as all! |
|
|
Mar 2 2007, 10:23 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
QUOTE(-pWs- @ Mar 1 2007, 05:14 PM) Meant DDR640??? owh... its 370 fsb, 740mHz... -pWs- QUOTE(RokXIII @ Mar 1 2007, 08:36 PM) do u mean u OC by using the stock NB heat sink? yaa.... thats y i stick wit stock clock... i dont want to burn the nb for the 2nd time... wow, i not dare to do so since i heard some1 said the stock NB heat sink perform so weak, worry it will burn.... ( juz got back the mobo after i burnt the nb....) This post has been edited by PVCpipe: Mar 2 2007, 10:27 AM |
|
|
Mar 2 2007, 10:30 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(PVCpipe @ Mar 2 2007, 10:23 AM) owh... its 370 fsb, 740mHz... Haha...paisehyaa.... thats y i stick wit stock clock... i dont want to burn the nb for the 2nd time... ( juz got back the mobo after i burnt the nb....) I saw wrong HeheThe nb very hot one? Luckily i din oc :S -pWs- |
|
|
Mar 2 2007, 12:48 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Mar 1 2007, 07:36 PM) do u mean u OC by using the stock NB heat sink? i dont know about u guys mobo...but mine NB using Vmch stock default n stock heatsink...n im stable at 3.55Ghz.. wow, i not dare to do so since i heard some1 said the stock NB heat sink perform so weak, worry it will burn.... everest can give me the correct temp reading jus like coretemp, but the voltage 1 is incorrect at all... Conclusion, i dun use everest as all! voltage reading in windows is totally diff than bios...so u might set in bios 1.6v...but windows will read it 1.56v only...its not the software...its the mobo itself This post has been edited by flatfinger: Mar 2 2007, 12:50 PM |
|
|
Mar 2 2007, 11:20 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(flatfinger @ Mar 2 2007, 12:48 PM) i dont know about u guys mobo...but mine NB using Vmch stock default n stock heatsink...n im stable at 3.55Ghz.. of course la it's stable.. but how long will the NB last ??? thats why i changed the nb hsf to prolong the life of my mobo |
|
|
Mar 3 2007, 02:39 PM
|
|
Senior Member
788 posts Joined: Oct 2005 From: latitude 4.58635°N, longitude 101.1076°E
|
just got 965PT today
|
|
|
Mar 3 2007, 10:21 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
yeah.. welcome to the club..
and i hope u have fun ocing ur cpu wiht it |
|
|
Mar 4 2007, 01:34 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
so, the bios temp reading is correct right?
still confuse, yet amaze coz my p4 got oc'ed to 3.5, yet the temp still reads idle 25c and full load never above 45.. u think sumthing wrong wit it? |
|
|
Mar 4 2007, 04:05 PM
|
Junior Member
495 posts Joined: Jan 2003
|
Seriously no more Deluxe version ka? KNN i running on RAID 0 now, wasted the HDD if cannot run RAID 0.....Damn fast ler...Any shop in LY still selling the Deluxe?
|
|
|
Mar 4 2007, 04:06 PM
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(nazerry @ Mar 4 2007, 01:34 AM) so, the bios temp reading is correct right? looks like u hv hacked into ur software kot...hehe...i think there is something wrong with ur temp meh.... still confuse, yet amaze coz my p4 got oc'ed to 3.5, yet the temp still reads idle 25c and full load never above 45.. u think sumthing wrong wit it? kan nazerry! edit:neway,can join ka ur thread...there is no thread bout my mobo... This post has been edited by fo33il: Mar 4 2007, 04:07 PM |
|
|
Mar 4 2007, 07:25 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(fo33il @ Mar 4 2007, 04:06 PM) looks like u hv hacked into ur software kot...hehe...i think there is something wrong with ur temp meh.... dude, y don u start a new thread on abit 9pro! uGuru oc'ing and stuff! haha.. u don't need to know everything to start a thread. u discuss dude! kan nazerry! edit:neway,can join ka ur thread...there is no thread bout my mobo... gtghost: no more production la dude! i looked for it too! ask any deluxe user if they wanna sell it.maybe u'll get lucky! |
|
|
Mar 4 2007, 08:14 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(nazerry @ Mar 4 2007, 07:25 PM) dude, y don u start a new thread on abit 9pro! uGuru oc'ing and stuff! haha.. u don't need to know everything to start a thread. u discuss dude! i dunno wat to ask meh... hv anyone try to find out wat is written under the TFORCE sticker on the 965PT board? some says 'DELUXE' is written under the sticker...really? This post has been edited by fo33il: Mar 4 2007, 08:19 PM |
|
|
Mar 5 2007, 08:29 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(ben_panced @ Mar 2 2007, 11:20 PM) of course la it's stable.. but how long will the NB last ??? thats why i changed the nb hsf to prolong the life of my mobo i think its ok..since im on stock default vmch 1.25v... |
|
|
Mar 5 2007, 09:46 AM
|
 
Staff
1,368 posts Joined: Nov 2004 From: A' Ghà idhealtachd
|
I just bought the board 2 days ago and i notice that thw num lock key is cacat when its in bios.Damn the board dont have enough IDE connectors.
Offer me if you have PCI IDE card for sale. My spec: Intel Pentium D 915 2.8Ghz 2Mx2 Biostar TForce P965 1x1024MB Kingston 667 DDR2 2x256MB Hynix 533 DDR2 80Gb Maxtor Sata2 8MB Powercolor X800GTO 256MB DDR3 1xLG 16XDVDRW 1xBenQ 18XDVDRW |
|
|
Mar 5 2007, 09:57 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(max_cjs0101 @ Mar 5 2007, 09:46 AM) I just bought the board 2 days ago and i notice that thw num lock key is cacat when its in bios.Damn the board dont have enough IDE connectors. cacat?? Offer me if you have PCI IDE card for sale. My spec: Intel Pentium D 915 2.8Ghz 2Mx2 Biostar TForce P965 1x1024MB Kingston 667 DDR2 2x256MB Hynix 533 DDR2 80Gb Maxtor Sata2 8MB Powercolor X800GTO 256MB DDR3 1xLG 16XDVDRW 1xBenQ 18XDVDRW Added on March 5, 2007, 10:23 amlate update info...Speedfan 4.32 is release 4.32 added a digitally signed 64 bit driver (fully tested under Vista 64 bit) added full support for INTEL CORE DUO internal temperature readings added full support for Andigilog aSC7621 added full support for Fintek F71882F added xAP support to publish temperatures and fan speeds improved support for Fintek F71782F improved support for IT8716F renamed temperatures readings for MAX6640 improved compatibility with Intel D975XBX2 reduced AD7416 and AD7417 false detections reduced MAX6650/6651 false detections improved Intel SMBus routines This post has been edited by flatfinger: Mar 5 2007, 10:23 AM |
|
|
Mar 5 2007, 10:49 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(fo33il @ Mar 4 2007, 08:14 PM) i dunno wat to ask meh... even if it is written Deluxe under the sticker, it still a non-deluxe version wer.... hv anyone try to find out wat is written under the TFORCE sticker on the 965PT board? some says 'DELUXE' is written under the sticker...really? |
|
|
Mar 5 2007, 10:53 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(flatfinger @ Mar 5 2007, 09:57 AM) cacat?? morning all! Added on March 5, 2007, 10:23 amlate update info...Speedfan 4.32 is release 4.32 added a digitally signed 64 bit driver (fully tested under Vista 64 bit) added full support for INTEL CORE DUO internal temperature readings added full support for Andigilog aSC7621 added full support for Fintek F71882F added xAP support to publish temperatures and fan speeds improved support for Fintek F71782F improved support for IT8716F renamed temperatures readings for MAX6640 improved compatibility with Intel D975XBX2 reduced AD7416 and AD7417 false detections reduced MAX6650/6651 false detections improved Intel SMBus routines yea, tho it support the chipset and stuff, still responded in incorrect temp & fan speed readings! do we need to config the adv setting or something? i dont even know which is which! only notice 2 readings is correct is the 2nd temp=mobo and the 4th temp=hdd0! mm.. what do u think the 3rd and 5th reading is?max:yea.. in bios numlock still not turned on. i wonder y.. |
|
|
Mar 5 2007, 11:42 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(max_cjs0101 @ Mar 5 2007, 09:46 AM) I just bought the board 2 days ago and i notice that thw num lock key is cacat when its in bios.Damn the board dont have enough IDE connectors. of course la... Offer me if you have PCI IDE card for sale. the ich8 southbridge no longer has integrated ide controller anymore... y dun u just sell ur existing pata hdd or dvd writer and buy a sata one |
|
|
Mar 6 2007, 10:49 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
eh... there's edi hav sata version for cd/dvd rom?
|
|
|
Mar 6 2007, 10:52 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(PVCpipe @ Mar 6 2007, 10:49 AM) eh... there's edi hav sata version for cd/dvd rom? ya ya! and the price is ranging at pata dvd too! cheap2! but i'll skip dat for now. |
|
|
Mar 6 2007, 11:26 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(PVCpipe @ Mar 6 2007, 10:49 AM) eh... there's edi hav sata version for cd/dvd rom? there's one brand wher the dvd burning up to 20x...and the price is quite reasonable..in fact quite cheap...go get it...yeah |
|
|
Mar 7 2007, 02:56 AM
|
|
Junior Member
21 posts Joined: Jan 2007
|
to get FSB:RAM 1:1 ratio on a P4 631 proc,i need to set my system memory to 400mhz rite? but in my bios there's no option for that setting. the only available ones are Auto, 533, 667 and 800. the RAM im using is just 2 sticks of cheap apacer 512mb 533mhz RAM.
|
|
|
Mar 7 2007, 08:54 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(aimless @ Mar 7 2007, 02:56 AM) to get FSB:RAM 1:1 ratio on a P4 631 proc,i need to set my system memory to 400mhz rite? but in my bios there's no option for that setting. the only available ones are Auto, 533, 667 and 800. the RAM im using is just 2 sticks of cheap apacer 512mb 533mhz RAM. did u already update latest bios...P96CA119rh2..its for e4300 actually...n have 400 divider..not sure going to work wit ya P4 631... |
|
|
Mar 7 2007, 09:11 AM
|
|
Junior Member
21 posts Joined: Jan 2007
|
*edit* found the latest beta bios on a 3rd party website
This post has been edited by aimless: Mar 7 2007, 10:14 AM |
|
|
Mar 7 2007, 01:40 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
Speedfan n Everest reading same for me....
 |
|
|
Mar 7 2007, 03:24 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(flatfinger @ Mar 7 2007, 08:54 AM) did u already update latest bios...P96CA119rh2..its for e4300 actually...n have 400 divider..not sure going to work wit ya P4 631... is that bios is just for e4300? im on p4 511, and using that bios, but my speedfan reading is crap. why huh? |
|
|
Mar 7 2007, 06:48 PM
|
|
Junior Member
21 posts Joined: Jan 2007
|
its not just you..i'm using p4 631 and speedfan 4.32 is giving me some crap reading. check it out
 This post has been edited by aimless: Mar 7 2007, 06:50 PM |
|
|
Mar 7 2007, 11:53 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
wow fan1 675000rpm...
im using 4.31.. but i configured the settings to change the labels and hide inccorrect reading so it will only shows correct reading |
|
|
Mar 8 2007, 04:43 PM
|
|
Staff
1,368 posts Joined: Nov 2004 From: A' Ghà idhealtachd
|
Hi everyone,im a new 965PT user and my Pentium D 915 2.8Ghz oc-ed max to 3.70Ghz only.Anyone have a PD 915 and did max oc?
|
|
|
Mar 8 2007, 05:38 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(ben_panced @ Mar 7 2007, 11:53 PM) wow fan1 675000rpm... u just hide them? so, just what reading got em right? i think just the sys temp and hdd temp r corect. cpu & other one(i don kno what temp is dat) just crap. tried to adjust but cant get de right temp. all my fan speed reading gone mad. so, u hide all the fan speed too? got some rite?im using 4.31.. but i configured the settings to change the labels and hide inccorrect reading so it will only shows correct reading |
|
|
Mar 9 2007, 01:17 AM
|
|
Senior Member
1,362 posts Joined: Nov 2005 From: k.terengganu.. alone.. with my bass...play.. alone
|
hav u tried motherboard monitor?
|
|
|
Mar 10 2007, 04:57 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Any new o'c BIOS for 965PT ?
|
|
|
Mar 11 2007, 04:49 PM
|
|
Staff
1,368 posts Joined: Nov 2004 From: A' Ghà idhealtachd
|
Anyone has problems when starting up where the post hangs and cant press any key?
Added on March 11, 2007, 4:55 pm QUOTE(coolice @ Sep 21 2006, 08:46 AM) i hope they come out the bios with fixed 4:5 divier cant boot prob.. Are you having the problem where you on the pc and it cant boot?This post has been edited by max_cjs0101: Mar 11 2007, 04:55 PM |
|
|
Mar 11 2007, 06:41 PM
|
|
Junior Member
21 posts Joined: Jan 2007
|
QUOTE(max_cjs0101 @ Mar 11 2007, 04:49 PM) Anyone has problems when starting up where the post hangs and cant press any key? try clearing the CMOS?Added on March 11, 2007, 4:55 pm Are you having the problem where you on the pc and it cant boot? |
|
|
Mar 11 2007, 10:31 PM
|
|
Staff
1,368 posts Joined: Nov 2004 From: A' Ghà idhealtachd
|
QUOTE(aimless @ Mar 11 2007, 06:41 PM) try clearing the CMOS? its not bout the cmos problem.I heard there's a problem about the 965 chipset where it has problems booting when the clocks are set at the 4:5 divider.. |
|
|
Mar 12 2007, 12:09 AM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(nazerry @ Mar 8 2007, 05:38 PM) u just hide them? so, just what reading got em right? i think just the sys temp and hdd temp r corect. cpu & other one(i don kno what temp is dat) just crap. tried to adjust but cant get de right temp. all my fan speed reading gone mad. so, u hide all the fan speed too? got some rite? on my machine, speedfan shows correct cpu and hdd temp, other than that crap... so i just hide them... while for the fan speed, it only shows correct reading for the fan that's connected to teh nb fan header on the mobo... |
|
|
Mar 12 2007, 12:30 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(ben_panced @ Mar 12 2007, 12:09 AM) on my machine, speedfan shows correct cpu and hdd temp, other than that crap... so i just hide them... while for the fan speed, it only shows correct reading for the fan that's connected to teh nb fan header on the mobo... how come!!! |
|
|
Mar 12 2007, 07:55 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(nazerry @ Mar 12 2007, 12:30 AM) how come!!! nothing is perfect... |
|
|
Mar 12 2007, 07:10 PM
|
Junior Member
68 posts Joined: Feb 2006
|
hey i hav this board too but i facin prob wif it,... my sata hdd is not detected in the bios..
so do i need driver? bios upgrade or anything? |
|
|
Mar 13 2007, 12:09 AM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(nazerry @ Mar 12 2007, 12:30 AM) how come!!! ok i'll upload teh screenshot tomorrow for 2 to see |
|
|
Mar 13 2007, 01:06 AM
|
|
Staff
1,368 posts Joined: Nov 2004 From: A' Ghà idhealtachd
|
Alamak,why izit when im in windows there are problems like sound distortion when playing music or watching movies.Anyone has similar experience?Pls share..
|
|
|
Mar 13 2007, 11:23 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Well, do anyone use the Biostar Fan Controller here? I realize that this software is useless at all, it created just let u read the temperature only. The fan controller function cant use at all, even i set it manually at 2500rpm, the temp wont go any lower, still the same like auto speed(1700rpm)...
|
|
|
Mar 13 2007, 12:13 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(RokXIII @ Mar 13 2007, 11:23 AM) Well, do anyone use the Biostar Fan Controller here? I realize that this software is useless at all, it created just let u read the temperature only. The fan controller function cant use at all, even i set it manually at 2500rpm, the temp wont go any lower, still the same like auto speed(1700rpm)... I dint try the Biostar Fan controller yet, so r u using the stock hsf? |
|
|
Mar 13 2007, 01:04 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(RokXIII @ Mar 13 2007, 11:23 AM) Well, do anyone use the Biostar Fan Controller here? I realize that this software is useless at all, it created just let u read the temperature only. The fan controller function cant use at all, even i set it manually at 2500rpm, the temp wont go any lower, still the same like auto speed(1700rpm)... Agree....it only allow us to read the fan speed. -pWs- |
|
|
Mar 13 2007, 03:21 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(nakata101 @ Mar 13 2007, 12:13 PM) I dint try the Biostar Fan controller yet, so r u using the stock hsf? yes, using stock hsf.Weird, even the fan speed has increase but still the temperature remain unchange, and the temp quite high also, >53C at idle... |
|
|
Mar 13 2007, 03:24 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Mar 13 2007, 11:23 AM) Well, do anyone use the Biostar Fan Controller here? I realize that this software is useless at all, it created just let u read the temperature only. The fan controller function cant use at all, even i set it manually at 2500rpm, the temp wont go any lower, still the same like auto speed(1700rpm)... me oso never used the bundle sopware from biostar...i just set mine using my AeroCool GateWatch |
|
|
Mar 14 2007, 11:23 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
AeroCool GateWatch, wats that??
any link? thanks! |
|
|
Mar 15 2007, 08:31 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Mar 14 2007, 11:23 AM) AeroCool GateWatch, wats that?? AeroCool GateWatch link any link? thanks!   This post has been edited by flatfinger: Mar 15 2007, 08:34 AM |
|
|
Mar 15 2007, 11:14 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Can this mobo support PCI VGA? I just bought a PCI VGA, but it cant be detected when i put into my mobo...
The PCI VGA is Trident TGUI9680-1. I'm still looking for the drive for this VGA, but seems like is not easy to find an ancient VGA's drive... This post has been edited by RokXIII: Mar 15 2007, 11:30 AM |
|
|
Mar 15 2007, 12:06 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Mar 15 2007, 11:14 AM) Can this mobo support PCI VGA? I just bought a PCI VGA, but it cant be detected when i put into my mobo... im using s3virge PCI as my backup VGA...detected n run well..np The PCI VGA is Trident TGUI9680-1. I'm still looking for the drive for this VGA, but seems like is not easy to find an ancient VGA's drive... |
|
|
Mar 15 2007, 03:12 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(flatfinger @ Mar 15 2007, 12:06 PM) im using s3virge PCI as my backup VGA...detected n run well..np do u need to install any drive or it install automatically? Coz mine 1 cant be detected, wonder izit i need to install the drive 1st.... the card seller(not from this forum) told me that it can be detected and no problem at all... erm.... |
|
|
Mar 15 2007, 06:42 PM
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
so the max vdimm of this board is 2.2v right?
if pencil mod the board got problem can warrantty? i mean i din tell them i pencil modd ? |
|
|
Mar 15 2007, 06:45 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Bros.. any new BIOS for our 965PT ??
Pls share link if alrdy release.. i wanna try o'c further. Thanks |
|
|
Mar 15 2007, 07:11 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
the latest bios is still the official 119 and the beta 119rh2 on january.
|
|
|
Mar 16 2007, 08:29 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(RokXIII @ Mar 15 2007, 03:12 PM) do u need to install any drive or it install automatically? Coz mine 1 cant be detected, wonder izit i need to install the drive 1st.... as for mine...winXP will auto detect it..no prob.. the card seller(not from this forum) told me that it can be detected and no problem at all... erm.... QUOTE(taxidoor @ Mar 15 2007, 06:42 PM) so the max vdimm of this board is 2.2v right? yes...between 2.18v-2.2v...any hardware mods will void ur warranty...if u didn't tell them...wish luck they wont detect it lor..if pencil mod the board got problem can warrantty? i mean i din tell them i pencil modd ? QUOTE(yehlai @ Mar 15 2007, 06:45 PM) Bros.. any new BIOS for our 965PT ?? not yet...Pls share link if alrdy release.. i wanna try o'c further. Thanks |
|
|
Mar 16 2007, 02:50 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Nice to see u all again flatfinger, pvcpipe and nakata...
Haha miss this thread so much. Hope 965PT release new BIOS soon. We wanna try o'c futher My ranking drop alrdy ..need catch up fast hehe  This post has been edited by yehlai: Mar 16 2007, 03:10 PM |
|
|
Mar 16 2007, 03:39 PM
|
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
okok what will do with new bios, as i know new bios is just fix bug and support new hardware rght ?
|
|
|
Mar 16 2007, 05:16 PM
|
Junior Member
468 posts Joined: Apr 2006 From: kl
|
anybody know where i can get the update bios??im a noob here
|
|
|
Mar 16 2007, 08:25 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
i find this site provide the official and moded bios.
im not very good at oc'ing, so i don't really know the special features on beta bios. i just download them and follow the guides.. |
|
|
Mar 16 2007, 10:47 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(zackskate666 @ Mar 16 2007, 05:16 PM) anybody know where i can get the update bios??im a noob here Im waiting for new BIOS too.. Then u might wanna know how to flash BIOS?? U can try WinFlash. |
|
|
Mar 16 2007, 10:54 PM
|
Junior Member
289 posts Joined: Jan 2007
|
can i ask u pro something??
i wan 2 buy a new motherboard,but no idea which is the best 4 overclockin n gaming.. currently usin intel p965 motherboard,cant overclock wan,make me frustrated.. can u all out there plz recommend a motherboard which no more than 600 n it's OVERCLOCKABLE?? its is bter still if it could support pci-e at full x16 mode..thx... |
|
|
Mar 16 2007, 10:58 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(chokchunynh @ Mar 16 2007, 10:54 PM) can i ask u pro something?? Depends to ur budget.. if underRM400 then 965PT is one of the best.i wan 2 buy a new motherboard,but no idea which is the best 4 overclockin n gaming.. currently usin intel p965 motherboard,cant overclock wan,make me frustrated.. can u all out there plz recommend a motherboard which no more than 600 n it's OVERCLOCKABLE?? its is bter still if it could support pci-e at full x16 mode..thx... RM800 or more then go for Asus Commando.. |
|
|
Mar 16 2007, 11:00 PM
|
|
Junior Member
289 posts Joined: Jan 2007
|
QUOTE(yehlai @ Mar 16 2007, 10:58 PM) Depends to ur budget.. if underRM400 then 965PT is one of the best. i heard dat some say gigabyte is good for oc,wat do u think??RM800 or more then go for Asus Commando.. |
|
|
Mar 16 2007, 11:06 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Gigabyte is good.. but not outstanding. Just my opinion.
Asus is still the best i think.. |
|
|
Mar 17 2007, 12:29 AM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Vrdoop is terrible on Asus board, including striker range. If you don't do vdroop mod, you can't go far.
I'll play with Asus today with the vdroop mod. Let's see how far this board can go with copper NB and a modded vdroop. NB is still hot for Biostar on our country, need either to change NB heatsink or use a fan to blow it. This post has been edited by gtghost: Mar 17 2007, 04:33 PM Attached thumbnail(s) 
|
|
|
Mar 17 2007, 09:03 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
bro, just need small fan to blow. Mine using 80mm fan with stock HS. Running really cool, even using max vMCH.
Wao.. u r pro, the snap is great. Nice set up. nice graphic !! This post has been edited by yehlai: Mar 17 2007, 09:05 PM |
|
|
Mar 18 2007, 01:30 AM
|
|
Newbie
2 posts Joined: Mar 2007
|
hey guys, a newbie here needing your help. i tried to increase my biostar tforce 965PT vMCH to 1.55 but after increasing it,my system wont boot. i can go as high as 1.35 from the default 1.25. any higher than 1.35 and the system wont boot. anything wrong with my mobo? its kinda new, about 2 weeks old..should i let it burn in summore? or do i need to change the NB cooler? right now im still using the stock NB cooler...
|
|
|
Mar 18 2007, 01:49 AM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Change NB cooler. Going higher with MCH means higher heat with NB. BTW, they reported that MCH is reporting lower than it is. If you set 1.55, it will be higher than 1.55, check previous post.
Or use a fan on top of the NB if you know how to mod. If not change cooler. This post has been edited by gtghost: Mar 18 2007, 01:51 AM |
|
|
Mar 18 2007, 03:36 AM
|
|
Newbie
2 posts Joined: Mar 2007
|
thanks
i changed the NB cooler as you said, and now i cant set the vMCH as i please thank you thank you |
|
|
Mar 18 2007, 10:25 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ Mar 17 2007, 09:03 PM) bro, just need small fan to blow. Mine using 80mm fan with stock HS. Running really cool, even using max vMCH. Yup, or use table fan will be another save/safe solution.Wao.. u r pro, the snap is great. Nice set up. nice graphic !! |
|
|
Mar 18 2007, 10:40 AM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(yehlai @ Mar 16 2007, 10:58 PM) Depends to ur budget.. if underRM400 then 965PT is one of the best. asus commando? dont laRM800 or more then go for Asus Commando.. get those XBX2 instead, its better |
|
|
Mar 18 2007, 06:20 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(flawless? @ Mar 18 2007, 01:30 AM) hey guys, a newbie here needing your help. i tried to increase my biostar tforce 965PT vMCH to 1.55 but after increasing it,my system wont boot. i can go as high as 1.35 from the default 1.25. any higher than 1.35 and the system wont boot. anything wrong with my mobo? its kinda new, about 2 weeks old..should i let it burn in summore? or do i need to change the NB cooler? right now im still using the stock NB cooler... QUOTE(gtghost @ Mar 18 2007, 01:49 AM) Change NB cooler. Going higher with MCH means higher heat with NB. BTW, they reported that MCH is reporting lower than it is. If you set 1.55, it will be higher than 1.55, check previous post. Or use a fan on top of the NB if you know how to mod. If not change cooler. QUOTE(flawless? @ Mar 18 2007, 03:36 AM) thanks bro...pls consider the actual vMCH of the board..if not u will ended burn the chip i changed the NB cooler as you said, and now i cant set the vMCH as i please thank you thank youActual Vmch Measurements 1.25V = 1.26V 1.35V = 1.47V (BIOS displays 1.45V) 1.45V = 1.66V 1.55V = 1.87V This post has been edited by flatfinger: Mar 18 2007, 06:20 PM |
|
|
Mar 18 2007, 08:59 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Hey bros, MSI can support 3.9GHz. Nice ha.. hope more Biostar user post result here. I sure Biostar can show some good result.
|
|
|
Mar 19 2007, 01:48 AM
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
hey there... anyone get to set FSB : DRAM = 1 : 1? @ 2.40ghz(or a bit higher) with RAM running @ 800mhz(or a bit higher) (with a pc6400 ram)? mind to post the settings? as i cant do 400fsb with x6 multiplier and running ram @ default 800mhz.. the whole system keep rebooting. sometimes need to clear cmos.
another question.. i already tested the new released bios whice indicates it has better dram timing configuration... mana tau.... cas4 -4 - 4 -12 shows that it's using cas3 - 4 - 4 -12 when using CPUz to see.. This mobo cant use cas4 la..?? |
|
|
Mar 19 2007, 07:27 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(derek87 @ Mar 19 2007, 01:48 AM) hey there... anyone get to set FSB : DRAM = 1 : 1? @ 2.40ghz(or a bit higher) with RAM running @ 800mhz(or a bit higher) (with a pc6400 ram)? mind to post the settings? as i cant do 400fsb with x6 multiplier and running ram @ default 800mhz.. the whole system keep rebooting. sometimes need to clear cmos. Dun understand why u run it on multiplierx6, i think something is wrong with ur setting.another question.. i already tested the new released bios whice indicates it has better dram timing configuration... mana tau.... cas4 -4 - 4 -12 shows that it's using cas3 - 4 - 4 -12 when using CPUz to see.. This mobo cant use cas4 la..?? 
|
|
|
Mar 19 2007, 10:40 AM
|
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
QUOTE(nakata101 @ Mar 19 2007, 07:27 AM) Dun understand why u run it on multiplierx6, i think something is wrong with ur setting. now im running normal lo.. 266 multiplier 9 ram 800mhz 5 -5 - 5 - 12.
nakata.. how you get 4 - 4 - 4 - 12? when i set to 4 -4 -4 -12, it always give me 3 - 4 - 4 - 12. my ram also cannot tahan.. it's that hynix fp-s5 bought from shawty de.. and also what did you set for g(mch) voltage? to get fsb to run at 333.7mhz? once i go over 320 fsb.. my system not stable edi... >< |
|
|
Mar 19 2007, 12:02 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(derek87 @ Mar 19 2007, 10:40 AM) now im running normal lo.. 266 multiplier 9 ram 800mhz 5 -5 - 5 - 12. What cpu cooler n power supply u r using now? nakata.. how you get 4 - 4 - 4 - 12? when i set to 4 -4 -4 -12, it always give me 3 - 4 - 4 - 12. my ram also cannot tahan.. it's that hynix fp-s5 bought from shawty de.. and also what did you set for g(mch) voltage? to get fsb to run at 333.7mhz? once i go over 320 fsb.. my system not stable edi... >< Or try this first>> 1 = CPU Voltage : 1.5-1.6V 2= FSB Termination Voltage : 1.45-1.5V 3= (G)MCH Voltage: 1.45V-1.5V 4=Memory Voltage: 2.0-2.2 5=System Memory clock: DDR533 (for 378MHz) or DDR667 (for 473MHz) 6=CPU clock : 378MHz (for 3.4GHz) DRAM Setting : 1=Cas Latency Time : 5 2=DRAM RAS # to CAS # Delay : 5 3=Dram RAS#Precharge : 5 4=Precharge Dealy (tras): 15 5=TWR: Default/Auto 6=TWTR: Default/Auto 7=TRRD: Default/Auto 8=TRTP: Default/Auto |
|
|
Mar 19 2007, 10:09 PM
|
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
QUOTE(nakata101 @ Mar 19 2007, 12:02 PM) What cpu cooler n power supply u r using now? im using thermal take purepower twv 500w, and thermaltake beettle. hehe.. im a TT fans.Or try this first>> 1 = CPU Voltage : 1.5-1.6V 2= FSB Termination Voltage : 1.45-1.5V 3= (G)MCH Voltage: 1.45V-1.5V 4=Memory Voltage: 2.0-2.2 5=System Memory clock: DDR533 (for 378MHz) or DDR667 (for 473MHz) 6=CPU clock : 378MHz (for 3.4GHz) DRAM Setting : 1=Cas Latency Time : 5 2=DRAM RAS # to CAS # Delay : 5 3=Dram RAS#Precharge : 5 4=Precharge Dealy (tras): 15 5=TWR: Default/Auto 6=TWTR: Default/Auto 7=TRRD: Default/Auto 8=TRTP: Default/Auto I see.. today i get to go 2.997ghz with 333mhz 9 multiplier and ram running at 667 mhz. with vcore 1.3++ i only changed the vcore. but i cant go higher than 346mhz 9 multiplier.. is it maybe i din set the fsb termination voltage higher? i did try set the mch to 1.45 but failed in 8 seconds by priming it. i dun dare set the mch so high... coz i can feel that the NB is so hot with my finger.. still haven mod the Heat sink. hehe.. But one more thing i still cant understand is that.. why can you guys get to do cas 4 - 4 - 4 - 12? i cant.. when i set cas to 4. it turns out to be 3. so i can only do 3 - 4 -4 - 12 which is absolutely not stable. im using Hynix FP-S5. i can see nakata doing 4 -4 -4 -12, how did you do that? |
|
|
Mar 20 2007, 10:15 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(derek87 @ Mar 19 2007, 10:09 PM) im using thermal take purepower twv 500w, and thermaltake beettle. hehe.. im a TT fans. I will try the Hynix ram with 4-4-4-12 later.... currently still using the D9GXK.I see.. today i get to go 2.997ghz with 333mhz 9 multiplier and ram running at 667 mhz. with vcore 1.3++ i only changed the vcore. but i cant go higher than 346mhz 9 multiplier.. is it maybe i din set the fsb termination voltage higher? i did try set the mch to 1.45 but failed in 8 seconds by priming it. i dun dare set the mch so high... coz i can feel that the NB is so hot with my finger.. still haven mod the Heat sink. hehe.. But one more thing i still cant understand is that.. why can you guys get to do cas 4 - 4 - 4 - 12? i cant.. when i set cas to 4. it turns out to be 3. so i can only do 3 - 4 -4 - 12 which is absolutely not stable. im using Hynix FP-S5. i can see nakata doing 4 -4 -4 -12, how did you do that? |
|
|
Mar 20 2007, 03:46 PM
|
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
QUOTE(nakata101 @ Mar 20 2007, 10:15 AM) I will try the Hynix ram with 4-4-4-12 later.... currently still using the D9GXK. ok... but i really heard that this mobo got problem with it's timing.. cas3 = 3 cas4 = 3 cas5 = 5 cas6 = 6 and so on.... i know you are using d9gxk, but you should be having the same problem if the mobo has timing problems no matter what ram you use... |
|
|
Mar 20 2007, 05:37 PM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Mine won't boot at CL4 above 470FSB. But i try with other mobo can boot at 500FSB at CL4 no problem at all and memtest stable. Biostar need to come out with a solution on this issue.
|
|
|
Mar 20 2007, 07:14 PM
|
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
QUOTE(gtghost @ Mar 20 2007, 05:37 PM) Mine won't boot at CL4 above 470FSB. But i try with other mobo can boot at 500FSB at CL4 no problem at all and memtest stable. Biostar need to come out with a solution on this issue. did you check is it really CL4 with cpuz? or you cant even boot? Did you try boot with CL4 -4 -4- 12 with lower fsb and check with mem test? and also check whether it is CL4- 4 -4 -12 with cpuz? or it's CL3 - 4- 4 - 12? |
|
|
Mar 21 2007, 01:30 AM
|
Junior Member
10 posts Joined: Mar 2007
|
Off topic a bit here......
Just want to know, does Patriot Ram Signature Line DDR2 PC6400 800Mhz 2x1GB compatible with Biostar Tforce 965PT? coz i got my eye on that particular RAM la...RM290 only selling at one of the shop in LYP. Have any one try to overclock it with Tforce 965PT? |
|
|
Mar 21 2007, 09:20 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
I think should be no prob.. 965PT dont have any RAM compatible issue.
|
|
|
Mar 21 2007, 01:29 PM
|
|
Junior Member
10 posts Joined: Mar 2007
|
cool....thanks bro....I'm off to lowyat plaza now to buy Patriot RAM...hehehehehe.....anyway thanks for the quick reply.
|
|
|
Mar 21 2007, 03:55 PM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Then how to explain ASUS P5N-E SLI can boot at DDR1000@4-4-4-10@2.2V and Biostar cannot? Same stick of RAM i stick into the mobos, not to mention it clears memtest for 3 hours! On biostar, once over DDR900, cannot go CL4, need CL5 to go. Probably chipset difference, as one use 965 and 650i.
Acutally, on Asus if can do the vdroop mod and get a 6600, it will be a lethal combo as the mobo can support up to 485FSB and I didn't see from the DB anyone going over 480 for 6600, crazy super timings on 4-4-4-10 |
|
|
Mar 22 2007, 06:42 AM
|
|
Senior Member
1,077 posts Joined: Nov 2006 From: Sabah,Sandakan Status:STUNNED
|
QUOTE(gtghost @ Mar 21 2007, 03:55 PM) Then how to explain ASUS P5N-E SLI can boot at DDR1000@4-4-4-10@2.2V and Biostar cannot? Same stick of RAM i stick into the mobos, not to mention it clears memtest for 3 hours! On biostar, once over DDR900, cannot go CL4, need CL5 to go. Probably chipset difference, as one use 965 and 650i. wah... then i bought wrong mobo edi? i got a fren selling it(p5ne sli) for RM420... i told him i wanna support biostar.. lol... coz i have been supporting asus for few years edi.. wanna test out others... >< dun make me regret eh gtghost... hahaha...Acutally, on Asus if can do the vdroop mod and get a 6600, it will be a lethal combo as the mobo can support up to 485FSB and I didn't see from the DB anyone going over 480 for 6600, crazy super timings on 4-4-4-10 This post has been edited by derek87: Mar 22 2007, 06:43 AM |
|
|
Mar 22 2007, 08:01 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(derek87 @ Mar 22 2007, 06:42 AM) wah... then i bought wrong mobo edi? i got a fren selling it(p5ne sli) for RM420... i told him i wanna support biostar.. lol... coz i have been supporting asus for few years edi.. wanna test out others... >< dun make me regret eh gtghost... hahaha... I never regret to get Biostar Tforce since first time to use Tforce 6100-939 n this Tforce 965PT, cheap n can oc better than other mobo which expensive more than 1xx to 2xx buck. |
|
|
Mar 22 2007, 10:24 AM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Yeah, if you don't mind the missing RAID and SLI functions as I been a good supporter for RAID since those P4 days when my ABIT-IC7MAX3 was running RAID 0. Loads games damn fast, heck I gotta go grab a cup of coffee when I finish loading games like warcraft and had to wait for others
I am missing RAID 0 now. Playing Titan Quest really is taking some toll on the HDD as I am the one hosting the server. Sometimes damn laggy when suddeny die AHAH. I mean, 450x9 multi for a E6600 you get 4GHz? if your processor ca support it. If i got a E6600, i would have sold my processor and biostar together and I keep the E6600 with RAID and do SLI better summore. C-zone was selling the cheapest XpertVision 7900GS for only RM550 which clocks at 500/1500. Where to find? RM1100 can do SLI nice nice already. I went 2 days ago out of stock already, so hot this GC cos of the nice price. Now i have to think twice wheter wanna get E6600 & keep the P5N-E SLI cos got buyer gonna COD tommorrow. Crap.......... |
|
|
Mar 22 2007, 06:42 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Wao.. running Raptor raid 0, so rich. Tht cost more than a proc alrdy.
But also depends la, if normal user like us.. only play light games, then dont need SLi or RAID i guess. Really not cheap. This post has been edited by yehlai: Mar 22 2007, 06:45 PM |
|
|
Mar 22 2007, 10:30 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
QUOTE(gtghost @ Mar 22 2007, 10:24 AM) Yeah, if you don't mind the missing RAID and SLI functions as I been a good supporter for RAID since those P4 days when my ABIT-IC7MAX3 was running RAID 0. Loads games damn fast, heck I gotta go grab a cup of coffee when I finish loading games like warcraft and had to wait for others i think it would be better if u buy 88gts 320mb rather than 79gs sli...I am missing RAID 0 now. Playing Titan Quest really is taking some toll on the HDD as I am the one hosting the server. Sometimes damn laggy when suddeny die AHAH. I mean, 450x9 multi for a E6600 you get 4GHz? if your processor ca support it. If i got a E6600, i would have sold my processor and biostar together and I keep the E6600 with RAID and do SLI better summore. C-zone was selling the cheapest XpertVision 7900GS for only RM550 which clocks at 500/1500. Where to find? RM1100 can do SLI nice nice already. I went 2 days ago out of stock already, so hot this GC cos of the nice price. Now i have to think twice wheter wanna get E6600 & keep the P5N-E SLI cos got buyer gonna COD tommorrow. Crap.......... eats less power while giving you higher performance & support dx10 |
|
|
Mar 23 2007, 08:27 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(ben_panced @ Mar 22 2007, 10:30 PM) i think it would be better if u buy 88gts 320mb rather than 79gs sli... yeah..agree... eats less power while giving you higher performance & support dx10 Dx10 babe  |
|
|
Mar 23 2007, 02:29 PM
|
|
Junior Member
495 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 22 2007, 06:42 PM) Wao.. running Raptor raid 0, so rich. Tht cost more than a proc alrdy. Ah yalah, but this Raptor i bought long time ago when i bought my p4 together. Still serving me well But also depends la, if normal user like us.. only play light games, then dont need SLi or RAID i guess. Really not cheap. Some games they developed so poorly they don't really utilise the HDD and GC properly, what a waste Now still scratching my head why the damn 965PT don't do CL4@DDR1000. Best CL4 did was only DDR900. Yehlai, ur bios running what version? |
|
|
Mar 23 2007, 11:54 PM
|
Junior Member
108 posts Joined: Jan 2003 From: kelana jaya / putrajaya
|
hey anyone can help borow me cd driver for this mobo? from cyberjaya anyone? flatfinger cepat tlg aku cari driver ni
i've tried d/l from the web but cannot use also damn dumb |
|
|
Mar 24 2007, 12:43 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(gtghost @ Mar 23 2007, 02:29 PM) Ah yalah, but this Raptor i bought long time ago when i bought my p4 together. Still serving me well The lates vers. moded by Rabel's Heaven. Latest attempt, able to reach 3.8GHz Some games they developed so poorly they don't really utilise the HDD and GC properly, what a waste Now still scratching my head why the damn 965PT don't do CL4@DDR1000. Best CL4 did was only DDR900. Yehlai, ur bios running what version? Hey Dav, now my D9 can clock at 1050MHz 4-4-4-10 i think can go futher..burn-in helps a lot i think. I tried run with 2.22vDimm since 3weeks ago. This post has been edited by yehlai: Mar 24 2007, 02:06 AM |
|
|
Mar 24 2007, 03:31 AM
|
|
Junior Member
495 posts Joined: Jan 2003
|
I'm using the same one too. Nonetheless, results are not the same. BTW,i am using the original latest bios now from Biostar website.
I noticed that if you flash your bios when you are on CL4, you have higher chance of booting at CL4. I think last time i flashed at CL5 thats why it won't let me boot at CL4 after DDR900. Now i can boot at DDR1000 but memtest still fails me at DDR930, so I think your D9GMH is a gem Don't think everyone can hit DDR1000@2.22v like your ones. I wonder if coolice and irigian got post thier results on how thier Kingston D9GMH. Would like to compare Maybe I just try burning in 2.22v all the way lah |
|
|
Mar 24 2007, 04:08 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
But i dint stress with memtest.. should be not stable one. If running Prime stress sure fail one
This post has been edited by yehlai: Mar 24 2007, 04:09 AM |
|
|
Mar 24 2007, 11:22 AM
|
|
Junior Member
21 posts Joined: Jan 2007
|
I'm having some issues with OCing my RAM, please help me out here..
current RAM im using is the Patriot signature line pc6400 1gb(800mhz, about 2 weeks old). im able to OC it to about 888mhz at CL5 and if i wanna go further, i have to set CL6=.=..which is kinda rare for ppl setting it that high, right?even after setting CL6 the highest i can go is 980mhz..vdimm i use is 2.4v. if i dont set CL6, any higher then 888mhz the thing wont boot..increasing vmch wont work either... but when i use my other RAM (apacer 533mhz 2x512mb, about a year old), i can go up as high as 800mhz CL5 and its stable  so whats going on here? is my patriot RAM not good or i might have to burn in the RAMs like what yehlai did? *edit* i also cant boot the patriot RAMs at 3:4 ratio. the FSB i set at that ratio is 300mhz and the resulting RAM mhz is 800.increasing the vMCH also wont do..what gives? This post has been edited by aimless: Mar 24 2007, 11:45 AM |
|
|
Mar 27 2007, 09:47 AM
|
|
Junior Member
495 posts Joined: Jan 2003
|
Rebel havens finally got it right. My mobo does not like the new bioses so I saw the latest bios the posted using P96ca914bs (first bios update from Biostar) and based on the bug forum, the new bioses couldn't boot at 450 above if you set vMCH > 1.25
The latest bioses were modded from the first bios and it totally rocks, but still with some spelling errors. Device = deivice? LOL Now, able to boot at 500Mhz @ vMCH 1.35 and the best thing, DDR980@4-4-4-10@2.2v rock solid with memtest 8 hours! Finally. Woo hoo time to beat old record. |
|
|
Mar 27 2007, 12:19 PM
|
Senior Member
879 posts Joined: Jan 2003
|
New Biostar Supporter here.. help me out since i hit the wall on OC..
E6400 2 X 512MB Kingston KVR Hynix C4 PC4200 (533mhz can OC up 800mhz on 2.0V) 2 X Sata, 1 X IDE Rebel Haven Bios Mod : Ip96a921.rh2 At current i can only OC up to 340FSB .. can boot into windows but fail SuperPi 512 & 1MB. I dunno wether my PSU (480W) or my Ram is holding me back.. I will be happy if i can hit 400FSB!!! Please advise! This post has been edited by intune: Mar 27 2007, 12:20 PM |
|
|
Mar 27 2007, 12:22 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Wht PSu u r using now? 480W is good enuf. If Acbel or Antec, Enermax then should be no prob.
Try lower the RAM multipler so u can test out how much the max FSB ur proc able to reach. For E6400 i think stock vCore can hit 2.8Ghz easillly. try add some cooling fan. This post has been edited by yehlai: Mar 27 2007, 12:23 PM |
|
|
Mar 27 2007, 12:25 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 12:22 PM) Wht PSu u r using now? 480W is good enuf. If Acbel or Antec, Enermax then should be no prob. im using normal PSU.. Try lower the RAM multipler so u can test out how much the max FSB ur proc able to reach. For E6400 i think stock vCore can hit 2.8Ghz easillly. try add some cooling fan. running on stock vcore.. The other day i tried lowering the multiply but i just wont boot and i have to clear cmos.My casing is open.. is it because NB gettin too hot..? or other issues.. btw im using Hypertx as CPU cooler. This post has been edited by intune: Mar 27 2007, 12:26 PM |
|
|
Mar 27 2007, 12:29 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Wht PSU? better dont use iCute type for oc, might burn ur mobo.
Wht vMGH u using? 2.8Ghz dont need too high, unless u got fan to cool down the NB. 965PT's NB overvoltage alot. 2.55v = 1.8+v |
|
|
Mar 27 2007, 12:34 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 12:29 PM) Wht PSU? better dont use iCute type for oc, might burn ur mobo. yea chaplang PSu.. gonna get good PSU soon. Any recomendation? my budget is limited maybe can spend 200-300.Wht vMGH u using? 2.8Ghz dont need too high, unless u got fan to cool down the NB. 965PT's NB overvoltage alot. 2.55v = 1.8+v Anyways i noticed.. Ip96a921.rh2 Bios no multiplier.?? which Bios is the best for 965PT now? Can my hynix C4 (bought from siuann) .. go 400FSB..? my VMGH is at default.. also i cant run TAT on my biostar p65T. This post has been edited by intune: Mar 27 2007, 02:56 PM |
|
|
Mar 27 2007, 08:35 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
965PT dont support TAT actually.
Get Silverstone 560W, RM 350 only. |
|
|
Mar 28 2007, 12:25 AM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 08:35 PM) 965PT dont support TAT actually. Yea considering Silverstone. Anyways managed to get to 2.8GHZ on (V)GMH 1.4. Definitely need better NB cooling. Get Silverstone 560W, RM 350 only. |
|
|
Mar 28 2007, 08:42 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(ic3johan @ Mar 23 2007, 11:54 PM) hey anyone can help borow me cd driver for this mobo? from cyberjaya anyone? flatfinger cepat tlg aku cari driver ni call me lar...or YM!..mcm tak biasai've tried d/l from the web but cannot use also damn dumb |
|
|
Mar 28 2007, 11:36 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(intune @ Mar 28 2007, 12:25 AM) Yea considering Silverstone. Anyways managed to get to 2.8GHZ on (V)GMH 1.4. Definitely need better NB cooling. For me, 965PT's only weakness is the NB, becoz using cheapo HS and runs hot. Overvoltage a lot actually. Thts why it can clock fast but the downside is temp veryyyyyy.. HoT !!But for now the factor tht bottleneck u is PSU (or might be proc) not the mobo for sure.. becoz 2.8GHz is only mild oc This post has been edited by yehlai: Mar 28 2007, 11:37 AM |
|
|
Mar 28 2007, 11:53 AM
|
Senior Member
1,034 posts Joined: Jan 2003
|
noobie here~
wan to ask. the Vgmh purpose is for wht de? y northbridge voltage will affect proc oc 1? i just get my e6600 last week. now setup is Biostar 965PT e6600 L642 2.7Ghz@1.325Vcore@1.35Vgmh@Intel Stock kula twinmos 600Mhz@2.1Vdimm (manage to run 800Mhz@2.1Vdimm n finish memtest without problem) coolerMaster Psu (duno which model liao, probally the rm250 1) b4 this can boot in to Xp without increase the Vgmh...y like tht 1? btw, wht software u guys recomended to monitor the temp n volts? the 1 provided vy biostar cd seems like very little information provided only...... This post has been edited by nexus: Mar 28 2007, 12:03 PM |
|
|
Mar 28 2007, 11:55 AM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 28 2007, 11:36 AM) For me, 965PT's only weakness is the NB, becoz using cheapo HS and runs hot. Overvoltage a lot actually. Thts why it can clock fast but the downside is temp veryyyyyy.. HoT !! applied AS5 on nb hsf and stuck vga cooler on it. VGMH at 1.45V when past 3GHZ . Passed superPi 512/1MB..no errorsBut for now the factor tht bottleneck u is PSU (or might be proc) not the mobo for sure.. becoz 2.8GHz is only mild oc Didnt want to stay too long due to unreliable PSU..maybe when i get a better pSU will stress test for sure. Apparently all the stability issues gone due to increase of the Vgmh. This post has been edited by intune: Mar 28 2007, 12:05 PM |
|
|
Mar 28 2007, 12:05 PM
|
|
Senior Member
1,034 posts Joined: Jan 2003
|
QUOTE(intune @ Mar 28 2007, 11:55 AM) applied AS5 on nb hsf and stuck vga cooler on it. (G)MCH at 1.45V when past 3GHZ . Passed superPi 512/1MB.. my 1 idle is 40-42C Didnt want to stay too long due to unreliable PSU.. Apparently all the stability issues gone due to increase of thw (G)MCH. so urs consider normal gua |
|
|
Mar 28 2007, 12:06 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nexus @ Mar 28 2007, 12:05 PM) my 1 idle is 40-42C I thot core2 idle at 32-35?? Try using core temp and speedfan to monitor temp .. so urs consider normal gua This post has been edited by intune: Mar 28 2007, 12:07 PM |
|
|
Mar 28 2007, 12:15 PM
|
|
Senior Member
1,034 posts Joined: Jan 2003
|
QUOTE(intune @ Mar 28 2007, 12:06 PM) I thot core2 idle at 32-35?? Try using core temp and speedfan to monitor temp .. har~?so low 1 meh?using stock kula? btw, i just boot in with 3.0Ghz@1.31Vcore@1.35Vgmh superpi 1M@17s now wan to run 2XsuperPi 16M to try stability kan cheong for my 1st time OC |
|
|
Mar 28 2007, 12:18 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nexus @ Mar 28 2007, 12:15 PM) har~? great! maybe u shud try prime95 or orthos to stress test.. U dun dare on mind cos chaplang PSU!.. so low 1 meh?using stock kula? btw, i just boot in with 3.0Ghz@1.31Vcore@1.35Vgmh superpi 1M@17s now wan to run 2XsuperPi 16M to try stability kan cheong for my 1st time OC |
|
|
Mar 28 2007, 12:25 PM
|
|
Senior Member
1,034 posts Joined: Jan 2003
|
2Xsuperpi 16M fials to complete anyhow, i go buy 4cm fan for NB 1st then only try again yesterday orthos stress test make my proc go up to 60C T_T |
|
|
Mar 28 2007, 01:16 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
just sharing my previous setup
Running E6400 @3.55Ghz stable BIOS: p96ca119rh2 RAM: Ballistix Tracer DDR2 PC6400 4-4-4-9 -auto-auto-auto-auto Vcore: 1.55v Vdimm: 2.1v Vmch: 1.25v Vfsb: 1.2v 444x8 533 1:1 CPU cooled by Gigabyte 3D Galaxy |
|
|
Mar 28 2007, 01:27 PM
|
|
Junior Member
495 posts Joined: Jan 2003
|
QUOTE(flatfinger @ Mar 28 2007, 01:16 PM) just sharing my previous setup Bro, you should check if you can tune down the vcore for more stablitiy as I hit 3.6Ghz @ 1.5vcore stable. And the memory you can tune for more speed by using 6-2-2-2 instead of auto all cause the 965PT got some memory bug. You can see it by using memset.Running E6400 @3.55Ghz stable BIOS: p96ca119rh2 RAM: Ballistix Tracer DDR2 PC6400 4-4-4-9 -auto-auto-auto-auto Vcore: 1.55v Vdimm: 2.1v Vmch: 1.25v Vfsb: 1.2v 444x8 533 1:1 CPU cooled by Gigabyte 3D Galaxy I would like to share my setup also after i put it back in the casing after extreme overclocking E6300 1.86Ghz@ 3.35 Ghz stable BIOS: P96CA914RH1 RAM: Kingston D9GMH DD2 4-4-4-10 6-2-2-2 Vcore: 1.375 Vdimm: 2.2 Vmch: 1.35 Vfsb: 1.2 485 x 7 533 1:1 CPU cooled by Zalman CNPS 9700NT Idle 40c Load 63c High idle and load cos casing old already, need to get the new lian li to cool it better. Out of the box i get 36 idle and load 58c. PSU blowing hot air to the CPU More than 450FSB requires you to pump up vmch. If you cannot boot up after 450 using 1.35 vMCH, then you need to use the bios above mentioned. |
|
|
Mar 28 2007, 01:36 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(gtghost @ Mar 28 2007, 01:27 PM) Bro, you should check if you can tune down the vcore for more stablitiy as I hit 3.6Ghz @ 1.5vcore stable. And the memory you can tune for more speed by using 6-2-2-2 instead of auto all cause the 965PT got some memory bug. You can see it by using memset. hehe..no need...i already sold my C2D... I would like to share my setup also after i put it back in the casing after extreme overclocking E6300 1.86Ghz@ 3.35 Ghz stable BIOS: P96CA914RH1 RAM: Kingston D9GMH DD2 4-4-4-10 6-2-2-2 Vcore: 1.375 Vdimm: 2.2 Vmch: 1.35 Vfsb: 1.2 485 x 7 533 1:1 CPU cooled by Zalman CNPS 9700NT Idle 40c Load 63c High idle and load cos casing old already, need to get the new lian li to cool it better. Out of the box i get 36 idle and load 58c. PSU blowing hot air to the CPU More than 450FSB requires you to pump up vmch. If you cannot boot up after 450 using 1.35 vMCH, then you need to use the bios above mentioned. |
|
|
Mar 28 2007, 09:09 PM
|
|
Senior Member
1,034 posts Joined: Jan 2003
|
wan to ask, is there anyway i can change the ram's 1T to 2T?
through bios or through software? suspect thts the cause of instability |
|
|
Mar 28 2007, 10:13 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
no.. you cannot change the command rate for this mobo, even when you use the rebel's haven bios mod II
|
|
|
Mar 28 2007, 11:28 PM
|
|
Senior Member
1,034 posts Joined: Jan 2003
|
QUOTE(ben_panced @ Mar 28 2007, 10:13 PM) no.. you cannot change the command rate for this mobo, even when you use the rebel's haven bios mod II when i set cpu clock to 330*9 -> the ram start to become unstable due to the 1Tif use 2:3 the ram only stable untill 860Mhz..... does this means that i can only clock my e6600 to 2.8G untill i change to a better ram? btw? how much u guys bought the NB 4cm fan n Ram coller? the ram is damn hot n NB is damn damn damn hot |
|
|
Mar 29 2007, 02:02 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(nexus @ Mar 28 2007, 11:28 PM) when i set cpu clock to 330*9 -> the ram start to become unstable due to the 1T Too bad if u only can OC to 2.8Ghz from the E6600, maybe there r something wrong with ur powersupply....if use 2:3 the ram only stable untill 860Mhz..... does this means that i can only clock my e6600 to 2.8G untill i change to a better ram? btw? how much u guys bought the NB 4cm fan n Ram coller? the ram is damn hot n NB is damn damn damn hot |
|
|
Mar 30 2007, 07:05 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
just a silly question i want to ask you guys..
does anyone ever used a quad core cpu with this board??? does this board support quad core cpus??? can the three phase power supply adequate power to quad core cpus??? hehe sorry for this silly question because i wanna go quad core if intel core 2 q6600 price does fall to the sub rm1500+ price point in q3. |
|
|
Mar 31 2007, 12:35 AM
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
QUOTE(ben_panced @ Mar 30 2007, 07:05 PM) just a silly question i want to ask you guys.. Correct me if I'm wrong but Biostar Tforce 965PT only support C2D.does anyone ever used a quad core cpu with this board??? does this board support quad core cpus??? can the three phase power supply adequate power to quad core cpus??? hehe sorry for this silly question because i wanna go quad core if intel core 2 q6600 price does fall to the sub rm1500+ price point in q3. |
|
|
Mar 31 2007, 12:42 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(beast921 @ Mar 31 2007, 12:35 AM) Correct me if I'm wrong but Biostar Tforce 965PT only support C2D. yes, you are right, it only support C2D, quad core is not supported! |
|
|
Apr 4 2007, 09:34 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Y0o guys.. my mobo's sound card not working anymore
Gonna take it to RMA soon.. hope can get Rev.2 mobo hahaWanna know 965PT got Rev.2 or not?? Now 965PT still in market?? |
|
|
Apr 4 2007, 11:13 AM
|
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
http://xbitlabs.com/articles/mainboards/di...rce-p965_4.html
latest review Tforece 965 got 2.6 vdim ? Added on April 4, 2007, 11:13 amhttp://xbitlabs.com/articles/mainboards/display/biostar-tforce-p965_4.html latest review Tforece 965 got 2.6 vdim ? This post has been edited by taxidoor: Apr 4 2007, 11:13 AM |
|
|
Apr 4 2007, 11:16 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(yehlai @ Apr 4 2007, 09:34 AM) Y0o guys.. my mobo's sound card not working anymore Got rev. 2 meh? I would like to change to rev.2 by take it to "RMA"... Gonna take it to RMA soon.. hope can get Rev.2 mobo hahaWanna know 965PT got Rev.2 or not?? Now 965PT still in market?? 965Pt still in market, still got ppl demands it. Added on April 4, 2007, 11:18 am QUOTE(taxidoor @ Apr 4 2007, 11:13 AM) http://xbitlabs.com/articles/mainboards/di...rce-p965_4.html I believe it is just the typing error, it didn't show out any screen prove that it got 2.6 vdimm....latest review Tforece 965 got 2.6 vdim ? Added on April 4, 2007, 11:13 amhttp://xbitlabs.com/articles/mainboards/display/biostar-tforce-p965_4.html latest review Tforece 965 got 2.6 vdim ? This post has been edited by RokXIII: Apr 4 2007, 11:18 AM |
|
|
Apr 4 2007, 11:27 AM
|
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
but the review kinda new 27-03-2007 Tfore 965 i think in the market a yeard right ?
|
|
|
Apr 4 2007, 01:48 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(taxidoor @ Apr 4 2007, 11:27 AM) but the review kinda new 27-03-2007 Tfore 965 i think in the market a yeard right ? But i nvr heard that 965PT got release rev.2, not even on the Biostar official website, so i still believe that it is a typing error.Thr got no way to increase the vdimm more than 2.2v unless u mod it.... |
|
|
Apr 5 2007, 01:15 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(RokXIII @ Mar 31 2007, 12:42 AM) yes, you are right, it only support C2D, quad core is not supported! 965PT support Quad Core la bro.. Most 965 chipset support QC one, just need to update the BIOS. |
|
|
Apr 5 2007, 05:10 PM
|
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
QUOTE(yehlai @ Apr 5 2007, 01:15 PM) 965PT support Quad Core la bro.. Ya ka???......I got one with me.....since i bought it i never used lagi...i just kept it in my tiny store with the rest of my pc part. But i do read the manual came along with the mobo & it stated there only support C2D maa... & if it does support quad core, where can i download the bios? at their official website? Most 965 chipset support QC one, just need to update the BIOS. |
|
|
Apr 6 2007, 12:58 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(beast921 @ Apr 5 2007, 05:10 PM) Ya ka???......I got one with me.....since i bought it i never used lagi...i just kept it in my tiny store with the rest of my pc part. But i do read the manual came along with the mobo & it stated there only support C2D maa... & if it does support quad core, where can i download the bios? at their official website? Yes, the latest BIOS from official website is good enuf. 965 chipset can fully support quard core. Dont worry. |
|
|
Apr 6 2007, 11:09 AM
|
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
QUOTE(yehlai @ Apr 6 2007, 12:58 AM) Yes, the latest BIOS from official website is good enuf. wahhh.....nice...thanks bro 965 chipset can fully support quard core. Dont worry. |
|
|
Apr 6 2007, 03:03 PM
|
|
Junior Member
83 posts Joined: Apr 2006
|
new 965PT user here. anyone noticed that there's something weird with this board's RAM timings? when i set FSB:RAM to 1:2 or 3:5, CL4, cpuz reports it as CL3. but when i set it to 1:1 CL4, it becomes the normal CL4. is it bios problem or something else?
|
|
|
Apr 10 2007, 02:17 AM
|
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
now oficial biostar.com.tw
got 3 version of Tforce 965 Tforce 965 Deluxe Tforce 965PT Tforce 965 *can any1 post a pic of the modo when connect with 24pin power? i wonder if i get the board and i using scythe ninja, how i do to adjust the cable with normal i cute atx case |
|
|
Apr 10 2007, 02:12 PM
|
|
Junior Member
83 posts Joined: Apr 2006
|
I read in the Rebel's Haven forum that is :
1. TForce 965 Deluxe 2. TForce 965PT 3. TForce 965 Express The express version is the one that supports 2.6v vdimm. @taxidoor I also have some problems routing the thick 24pin power cable For the 4 pin CPU power cable I routed it so that it goes from the PSU to the rear exhaust fan then bent 90 degrees to the connector on the board. I tried doing the same for the 24 pin but it was just too thick to properly route it..BTW, does the Scyte Ninja use a metal black plate? you might need to insulate the metal black plate with insulating tape because the pins at the back of the motherboard will touch the back plate and you won't be able to POST. That's what happened with my Tr Ultra-120 This post has been edited by FLubber: Apr 10 2007, 02:24 PM |
|
|
Apr 10 2007, 07:59 PM
|
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
nono i havent get the board yet.. csz the 24pin issue..
Ninja is push pin way no back plate.. the problem is the ninja ar big |
|
|
Apr 11 2007, 09:56 AM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(taxidoor @ Apr 10 2007, 02:17 AM) now oficial biostar.com.tw Anyone tried the leatest BIOS ??got 3 version of Tforce 965 Tforce 965 Deluxe Tforce 965PT Tforce 965 *can any1 post a pic of the modo when connect with 24pin power? i wonder if i get the board and i using scythe ninja, how i do to adjust the cable with normal i cute atx case I wanna clock my proc + mobo extremely for the last time b4 i send my 965PT for RMA. Pls shre some new result with me.. if anyone alrdy o'c with the new BIOS. Thanks. |
|
|
Apr 11 2007, 11:39 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
Ive upgraded my rams to 2GB teamgroup value rams but dun seem to be able to boot my 965PT past 360FSB. Works fine with my previous Hynix C4 tho..
Have anyone tried the pencil mod..? |
|
|
Apr 12 2007, 01:25 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(intune @ Apr 11 2007, 11:39 PM) Ive upgraded my rams to 2GB teamgroup value rams but dun seem to be able to boot my 965PT past 360FSB. Works fine with my previous Hynix C4 tho.. Ya, thr got someone have tried to do the pencil mod...Have anyone tried the pencil mod..? btw, teamgroup value ram not so good in OCing..... |
|
|
Apr 12 2007, 05:45 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(RokXIII @ Apr 12 2007, 01:25 AM) Ya, thr got someone have tried to do the pencil mod... CUrrently doing DDR 960MHZ @ DDR2 480MHZ 2.0V. Its PC5300 Value by the way.btw, teamgroup value ram not so good in OCing..... |
|
|
Apr 12 2007, 05:47 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
AFAIK Corsair VS also can clock at 500MHz. But timing is quite loose.
|
|
|
Apr 12 2007, 06:40 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Apr 12 2007, 05:47 PM) AFAIK Corsair VS also can clock at 500MHz. But timing is quite loose. u tried the pencil mod to increase vdimm? |
|
|
Apr 13 2007, 01:09 PM
|
|
Junior Member
495 posts Joined: Jan 2003
|
New bios no difference to me. Still can't boot past 450FSB when pumped VMCH@1.35. Only the 1st version old bios could boot.
|
|
|
Apr 13 2007, 05:32 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
Im trying to figure out which is the temp for NB in my 965PT.
 This post has been edited by intune: Apr 14 2007, 01:17 AM |
|
|
Apr 14 2007, 10:35 AM
|
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
how come the Temp1 is 127C' perrrghh that like boiling water already.
|
|
|
Apr 14 2007, 11:15 AM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(beast921 @ Apr 14 2007, 10:35 AM) how come the Temp1 is 127C' perrrghh that like boiling water already. dunno.. i think that not connected to anytin ler.. might be error or sometin. Seen ppl having same thing also. |
|
|
Apr 14 2007, 11:45 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(intune @ Apr 13 2007, 05:32 PM) Im trying to figure out which is the temp for NB in my 965PT. same like mine, my temp1 also shown as 127C, but i hide it! » Click to show Spoiler - click again to hide... « but i wonder the temp 2&3 is which part temp? |
|
|
Apr 14 2007, 12:19 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
The new BIOS is not bad
Just test it yesterday.  LINK 3.81Ghz (423FSB * 9) Mobo: Biostar 965PT rev.1; P96CA404 (Rebels Heavn Mod.) Bios This post has been edited by yehlai: Apr 14 2007, 01:14 PM |
|
|
Apr 14 2007, 02:54 PM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Apr 14 2007, 12:19 PM) The new BIOS is not bad yeah new bios is great.. got as far as 3.5 on my hynix C4 rams. Just test it yesterday. LINK 3.81Ghz (423FSB * 9) Mobo: Biostar 965PT rev.1; P96CA404 (Rebels Heavn Mod.) Bios Added on April 14, 2007, 3:07 pm QUOTE(RokXIII @ Apr 14 2007, 11:45 AM) same like mine, my temp1 also shown as 127C, but i hide it! Must be SB & NB? really need to know which is NB.. but i wonder the temp 2&3 is which part temp? This post has been edited by intune: Apr 14 2007, 03:07 PM |
|
|
Apr 15 2007, 01:23 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(intune @ Apr 14 2007, 11:15 AM) dunno.. i think that not connected to anytin ler.. might be error or sometin. Seen ppl having same thing also. I think is error something lah... but the N/S bridge is always on hot n spicey one....QUOTE(yehlai @ Apr 14 2007, 12:19 PM) The new BIOS is not bad Wao... the ES new record..... Just test it yesterday. LINK 3.81Ghz (423FSB * 9) Mobo: Biostar 965PT rev.1; P96CA404 (Rebels Heavn Mod.) Bios Too bad i dun have time to test it....  |
|
|
Apr 17 2007, 07:01 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(beast921 @ Apr 14 2007, 10:35 AM) how come the Temp1 is 127C' perrrghh that like boiling water already. QUOTE(intune @ Apr 14 2007, 11:15 AM) dunno.. i think that not connected to anytin ler.. might be error or sometin. Seen ppl having same thing also. yea.. mine also got the same prob. quoted for help already, some said it's the mobo's bugs. we got bugged mobo la dude! i've seen others got their temp correctly.. |
|
|
Apr 17 2007, 08:35 AM
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nazerry @ Apr 17 2007, 07:01 AM) yea.. mine also got the same prob. quoted for help already, some said it's the mobo's bugs. we got bugged mobo la dude! did u find out which is the NB temp..? i've seen others got their temp correctly.. |
|
|
Apr 17 2007, 02:49 PM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
QUOTE(intune @ Apr 17 2007, 08:35 AM) did u find out which is the NB temp..? there 's no way u can find the NB temp...the mobo sensor also far away for it...most likely for SB...if u used external heat sensor maybe can do then... |
|
|
Apr 17 2007, 10:37 PM
|
|
Senior Member
962 posts Joined: Dec 2004 From: Kulai
|
i tot this mobo don have a temp sensor for the nb and sb?? so why bother, i think speedfan is at wrong here
|
|
|
Apr 18 2007, 12:45 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Do anyone here running with Vista, coz I wana know that whether thr got any drive that is compatible with Vista, for the audio, network adapter..... (instead of using the M$'s drive).
Thanks! |
|
|
Apr 23 2007, 03:30 PM
|
|
Junior Member
124 posts Joined: Nov 2006
|
wow... can oc so high... geng...!!!
|
|
|
Apr 23 2007, 08:23 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(RokXIII @ Apr 18 2007, 12:45 AM) Do anyone here running with Vista, coz I wana know that whether thr got any drive that is compatible with Vista, for the audio, network adapter..... (instead of using the M$'s drive). Biostar 965PT have no compatible prob with Vista. I ran Vista U|tiMaTe last time, no prob at all. But i forgot the Biostar Utilities soft is compatible or not.Thanks! But should be no prob, since this mobo is Vista ready. |
|
|
Apr 23 2007, 11:01 PM
|
Senior Member
1,743 posts Joined: Jul 2006 From: Shah Alam
|
QUOTE(yehlai @ Apr 23 2007, 08:23 PM) Biostar 965PT have no compatible prob with Vista. I ran Vista U|tiMaTe last time, no prob at all. But i forgot the Biostar Utilities soft is compatible or not. i wonder why my proc can't oc when using vista ultimate...freeze at the bootscreen... if use xp no prob...But should be no prob, since this mobo is Vista ready. |
|
|
Apr 24 2007, 06:51 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(heizad @ Apr 23 2007, 11:01 PM) i wonder why my proc can't oc when using vista ultimate...freeze at the bootscreen... if use xp no prob... Vista requirement for RAM is significantly higher than XP. In other words, Vista utilize more memory, so cant support ur o'c like XP do. Maybe u can try lower the memory clock speed or losing the RAM timing a bit to see how? |
|
|
Apr 30 2007, 06:50 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
Guys, dunno is bad news or not.. i have try QX6700 ES yesterday, but it cant boot at all, dunno is my BIOS version or i need to clear the CMOS first, tomolo i will try it again, really hate the TT Big Typhoon now, this cooler really troublesome one..........
|
|
|
May 1 2007, 12:41 AM
|
Junior Member
120 posts Joined: Jan 2003 From: Kota Damansara
|
Has anyone tried to run biostar TForce 965PT with C2D E6700 ES? is it ok? hows the OC like?
|
|
|
May 1 2007, 08:20 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(asroy @ May 1 2007, 12:41 AM) Has anyone tried to run biostar TForce 965PT with C2D E6700 ES? is it ok? hows the OC like? NO problem to run it, but i dint try the OC ability. |
|
|
May 3 2007, 04:19 PM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(nakata101 @ Apr 30 2007, 06:50 PM) Guys, dunno is bad news or not.. i have try QX6700 ES yesterday, but it cant boot at all, dunno is my BIOS version or i need to clear the CMOS first, tomolo i will try it again, really hate the TT Big Typhoon now, this cooler really troublesome one.......... Finally after i clear my cmos, our mobo can boot like normal, but i found the FSB still run in 1066 that show in CPUZ. 
|
|
|
May 3 2007, 04:42 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Wao.. can run alrdy. Its time to o'c
|
|
|
May 8 2007, 04:26 PM
|
|
Junior Member
83 posts Joined: Apr 2006
|
bumping an old thread. Is there anyway to do the vdroop mod on this motherboard but using a pencil instead? i wanna do a pencil mod for the vdroop instead of soldering things. and looking at this picture
 will connecting the 2 points by drawing a line on the PCB using a pencil from one of the points to the second point work? This post has been edited by FLubber: May 8 2007, 04:27 PM |
|
|
May 21 2007, 01:01 PM
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
Btw, can anyone send me the IDE driver for 965PT? i cant seem to find it at biostar's site
Btw, any known methods to force the ram running at 2T? besides slotting in 4rams in all the slots |
|
|
May 22 2007, 03:07 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
|
|
|
May 22 2007, 01:03 PM
|
 
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(kucingfight @ May 21 2007, 01:01 PM) Btw, can anyone send me the IDE driver for 965PT? i cant seem to find it at biostar's site i thought it's already running @ 2T. No? Btw, any known methods to force the ram running at 2T? besides slotting in 4rams in all the slots As for the driver, try VIA website. This post has been edited by ALeUNe: May 22 2007, 01:04 PM |
|
|
May 24 2007, 02:25 PM
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
Using the latest mod rebel's bios. Withthe ES and 2x1gb KVR Hynix FP-Y5, i can only boot until 310fsb and only 400fsb. i cant boot between 310-400 or 400-450. I've gone thru rebel's workaround on this mobo. I've put the fan on the NB and using a good HSF. The overheating is out of the issue. aso i've set my rams to 5-5-5-12.
|
|
|
May 24 2007, 02:35 PM
|
|
Senior Member
1,711 posts Joined: Jan 2003 From: 3rd Planet. Somewhere of nowhere. Do I exist ?
|
QUOTE(kucingfight @ May 24 2007, 02:25 PM) Using the latest mod rebel's bios. Withthe ES and 2x1gb KVR Hynix FP-Y5, i can only boot until 310fsb and only 400fsb. i cant boot between 310-400 or 400-450. I've gone thru rebel's workaround on this mobo. I've put the fan on the NB and using a good HSF. The overheating is out of the issue. aso i've set my rams to 5-5-5-12. Looks like we have almost the same situation. I have the T965 express version. The non deluxe and non PT but Vista certifiy mobo. My E4300, if use original bios, only unitl 220fsb. After using the rebel's latest bios, can go until 315fsb. Also 2 x 1GB KVR Hynix FP-Y5. Hopefully there will be new bios coming up. |
|
|
May 24 2007, 02:47 PM
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(epsilon99 @ May 24 2007, 02:35 PM) Looks like we have almost the same situation. probably for ur case it's a little different. The BSEL mod might/not work for u. There's a strap speed change which occur around +/- 20fsb from 400fsb. did u straight jump to 400fsb? I have the T965 express version. The non deluxe and non PT but Vista certifiy mobo. My E4300, if use original bios, only unitl 220fsb. After using the rebel's latest bios, can go until 315fsb. Also 2 x 1GB KVR Hynix FP-Y5. Hopefully there will be new bios coming up. that would be 3.6ghz which would be too much.Added on May 25, 2007, 9:28 amanyways, gave some tests and played around with my setup yest. Funny thing is that, i got better stabilities when the rams are in the Orange slots instead of the greens. got my ES to 3.2ghz @ 1.45v. This post has been edited by kucingfight: May 25 2007, 09:28 AM |
|
|
May 26 2007, 09:35 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I got one Q. Whenever i wan to overclock from default, the computer will off for few seconds b4 getting boot.
Is it normal?? -pWs- |
|
|
May 26 2007, 11:18 PM
|
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
any of 965PT user here experience prob wif
IDE controller... mind to share wif me... here the link: http://forum.lowyat.net/topic/462690 |
|
|
May 29 2007, 08:15 AM
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(-pWs- @ May 26 2007, 09:35 PM) I got one Q. Whenever i wan to overclock from default, the computer will off for few seconds b4 getting boot. yeap it's normal. Going thru "Global Reset" . Rebel's has a lot info on itIs it normal?? -pWs- |
|
|
May 31 2007, 09:04 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
My mobo suddenly dead when i try to oc the QX6700 to 3.9Ghz... (boot into windows n suddenly shutdown itself n it never wakeup again.)
.Anyway i have try on 3.7Ghz@1.55v@idle temp 55", only try run superPI n C&C3, it look quite stable. 
Edit: Already send my dead mobo to RMA, hope they can change lastest revision mobo for me. This post has been edited by nakata101: May 31 2007, 09:07 AM |
|
|
May 31 2007, 10:25 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
guys...intel release E2140 n E2160....any info the 965PT fully support it???
|
|
|
May 31 2007, 08:40 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(nakata101 @ May 31 2007, 09:04 AM) My mobo suddenly dead when i try to oc the QX6700 to 3.9Ghz... (boot into windows n suddenly shutdown itself n it never wakeup again.) nakata .Anyway i have try on 3.7Ghz@1.55v@idle temp 55", only try run superPI n C&C3, it look quite stable.
Edit: Already send my dead mobo to RMA, hope they can change lastest revision mobo for me. ur QX6700 alrdy go beyond 3.8GHz liao? Wao, thts powerful share some screenie with us pls. BTW, 965PT got new Rev. meh? Im going to RMA mine too since its integrated sound card alrdy dead (few weeks ago). Hope can get new Rev. too. This post has been edited by yehlai: May 31 2007, 08:42 PM |
|
|
Jun 1 2007, 07:38 AM
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(yehlai @ May 31 2007, 08:40 PM) nakata I though i can make it to 3.9Ghz n print the screenshot directly, so i dint catch the screenshot of 3.8Ghz, manatau.... ur QX6700 alrdy go beyond 3.8GHz liao? Wao, thts powerful share some screenie with us pls. BTW, 965PT got new Rev. meh? Im going to RMA mine too since its integrated sound card alrdy dead (few weeks ago). Hope can get new Rev. too. I dun remember which forum have mention it got new rev for Tforce965PT. So few week already, u still dint get ur mobo back yet? |
|
|
Jun 1 2007, 10:48 AM
|
|
Senior Member
2,042 posts Joined: Jan 2003 From: KL
|
QUOTE(flatfinger @ May 31 2007, 10:25 AM) guys...intel release E2140 n E2160....any info the 965PT fully support it??? BIOS updates should do it. Seems that Biostar have a lot of supporters now. Even got special tweak BIOS.  |
|
|
Jun 1 2007, 02:16 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
just found out that rebels haven has released the latest bios which is P96CA514RH1(29/5/07)...
refer here, http://www.lejabeach.com/Biostar/965pt/ |
|
|
Jun 1 2007, 05:09 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
@nakata,
yes, lazy to RMA it.. using my own sound device actually. But i think my NB got prob alrdy becoz yesterday when i run my mobo driver cd, my mobo cant be recognize. 3.8GHz for QX6700 is very good alrdy, share some screenie here pls. QUOTE(RokXIII @ Jun 1 2007, 02:16 PM) just found out that rebels haven has released the latest bios which is P96CA514RH1(29/5/07)... Wao.. new BIOS. Gonna try it. Thanks for sharing refer here, http://www.lejabeach.com/Biostar/965pt/ This post has been edited by yehlai: Jun 1 2007, 05:12 PM |
|
|
 Jun 7 2007, 08:54 AM
|
|
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...
|
new bios release with 1T and 2T option added....
P96CA601RH1.zip link BIOS for TForce 965PT Release Date 2007/06/01 Update Description: memory 1T/2T option |
|
|
Jun 7 2007, 09:18 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Jun 7 2007, 08:54 AM) new bios release with 1T and 2T option added.... thanks bro, i tried the 2nd latest BIOS b4. Dont get much improvements. P96CA601RH1.zip link BIOS for TForce 965PT Release Date 2007/06/01 Update Description: memory 1T/2T option Found tht my mobo got vDrop more than the other day. Dunno why.. |
|
|
Jun 7 2007, 09:53 PM
|
Senior Member
1,221 posts Joined: Mar 2006
|
hmmm, any other e4300 users stuck at 315fsb?
|
| Change to: |  0.1891sec
 0.95
 6 queries
 GZIP Disabled
Time is now: 11th December 2025 - 01:37 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.