hey there... anyone get to set FSB : DRAM = 1 : 1? @ 2.40ghz(or a bit higher) with RAM running @ 800mhz(or a bit higher) (with a pc6400 ram)? mind to post the settings? as i cant do 400fsb with x6 multiplier and running ram @ default 800mhz.. the whole system keep rebooting. sometimes need to clear cmos.

another question.. i already tested the new released bios whice indicates it has better dram timing configuration... mana tau.... cas4 -4 - 4 -12 shows that it's using cas3 - 4 - 4 -12 when using CPUz to see.. This mobo cant use cas4 la..??

now im running normal lo.. 266 multiplier 9 ram 800mhz 5 -5 - 5 - 12.

nakata.. how you get 4 - 4 - 4 - 12? when i set to 4 -4 -4 -12, it always give me 3 - 4 - 4 - 12. my ram also cannot tahan.. it's that hynix fp-s5 bought from shawty de..

and also what did you set for g(mch) voltage? to get fsb to run at 333.7mhz? once i go over 320 fsb.. my system not stable edi... ><

im using thermal take purepower twv 500w, and thermaltake beettle. hehe.. im a TT fans.

I see.. today i get to go 2.997ghz with 333mhz 9 multiplier and ram running at 667 mhz. with vcore 1.3++ i only changed the vcore. but i cant go higher than 346mhz 9 multiplier.. is it maybe i din set the fsb termination voltage higher? i did try set the mch to 1.45 but failed in 8 seconds by priming it. i dun dare set the mch so high... coz i can feel that the NB is so hot with my finger.. still haven mod the Heat sink. hehe..

But one more thing i still cant understand is that.. why can you guys get to do cas 4 - 4 - 4 - 12? i cant.. when i set cas to 4. it turns out to be 3. so i can only do 3 - 4 -4 - 12 which is absolutely not stable. im using Hynix FP-S5. i can see nakata doing 4 -4 -4 -12, how did you do that?

ok... but i really heard that this mobo got problem with it's timing..
cas3 = 3
cas4 = 3
cas5 = 5
cas6 = 6
and so on....

i know you are using d9gxk, but you should be having the same problem if the mobo has timing problems no matter what ram you use...

did you check is it really CL4 with cpuz? or you cant even boot? Did you try boot with CL4 -4 -4- 12 with lower fsb and check with mem test? and also check whether it is CL4- 4 -4 -12 with cpuz? or it's CL3 - 4- 4 - 12?

wah... then i bought wrong mobo edi? i got a fren selling it(p5ne sli) for RM420... i told him i wanna support biostar.. lol... coz i have been supporting asus for few years edi.. wanna test out others... >< dun make me regret eh gtghost... hahaha...

This post has been edited by derek87: Mar 22 2007, 06:43 AM

Guys.. im using vista now with this board. Just wanna ask, when i open cpuz, it shows that im running on a X6 multiplier, but when i stress the cpu or open files, it goes up to x9 multiplier, may i know is there a setting in the bios where u can permanently run at x9 multiplier?

any NB cooler to recommend?

never try thou.. but i heard can support 45nm with 1066fsb or 800fsb without any problem.. i see some ppl using E5400 on this mobo..

latest bios 828 can support 1333fsb but memory clock can only use 667mhz.. that's the issue.

For those previous biostar 965pt users.. mine to share if u want 400FSB, what Vmch and vcore need to be used?

my previous OC with my E6600 needed 1.4X vcore to boot 345 x 9 to boot stable.. but it's not the proc's problem... coz now i changed to QX6800 also cant boot 400 x 7, or 420 x 7 or any combination for stock clock. reason? because i want 1:1 ratio.

This post has been edited by derek87: Apr 17 2009, 06:39 PM

mine to share ur settings? lol... i still dunno whether i should change or not.. due to my problem above...

i just got QX6800.. i can easily run 320 x 11 (3.5ghz) for 24/7 use... and do 4 : 5 fsb : ram ratio. to keep the RAM running at 800mhz.. coz i really dunno why i cant hit 400 above FSB with this mobo with every possible settings i tried ( i guess ).

or should i get a new mobo? a p45 chipset maybe TP45HP, just for the sake of running 400 x 9 with 1:1 ratio?

enlighten me la... hahaha...

This post has been edited by derek87: Apr 18 2009, 01:46 AM