Btw, any known methods to force the ram running at 2T? besides slotting in 4rams in all the slots
BIOSTAR TFOFCE 965PT/DLX Disscussion
|
|
 May 21 2007, 01:01 PM
Return to original view | Post
#1
|
 
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam   
|
Btw, can anyone send me the IDE driver for 965PT? i cant seem to find it at biostar's site
Btw, any known methods to force the ram running at 2T? besides slotting in 4rams in all the slots |
Quote|
|
|
|
|
May 24 2007, 02:25 PM
Return to original view | Post
#2
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
Using the latest mod rebel's bios. Withthe ES and 2x1gb KVR Hynix FP-Y5, i can only boot until 310fsb and only 400fsb. i cant boot between 310-400 or 400-450. I've gone thru rebel's workaround on this mobo. I've put the fan on the NB and using a good HSF. The overheating is out of the issue. aso i've set my rams to 5-5-5-12.
|
|
|
May 24 2007, 02:47 PM
Return to original view | Post
#3
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(epsilon99 @ May 24 2007, 02:35 PM) Looks like we have almost the same situation. probably for ur case it's a little different. The BSEL mod might/not work for u. There's a strap speed change which occur around +/- 20fsb from 400fsb. did u straight jump to 400fsb? I have the T965 express version. The non deluxe and non PT but Vista certifiy mobo. My E4300, if use original bios, only unitl 220fsb. After using the rebel's latest bios, can go until 315fsb. Also 2 x 1GB KVR Hynix FP-Y5. Hopefully there will be new bios coming up.   that would be 3.6ghz which would be too much.Added on May 25, 2007, 9:28 amanyways, gave some tests and played around with my setup yest. Funny thing is that, i got better stabilities when the rams are in the Orange slots instead of the greens. got my ES to 3.2ghz @ 1.45v. This post has been edited by kucingfight: May 25 2007, 09:28 AM |
|
|
May 29 2007, 08:15 AM
Return to original view | Post
#4
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(-pWs- @ May 26 2007, 09:35 PM) I got one Q. Whenever i wan to overclock from default, the computer will off for few seconds b4 getting boot. yeap it's normal. Going thru "Global Reset" . Rebel's has a lot info on itIs it normal?? -pWs- |
|
|
Jun 11 2007, 10:23 AM
Return to original view | Post
#5
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(RokXIII @ Jun 9 2007, 05:36 PM) i able to find the 40mm fan, but i dunno how to mount it on the NB.... It's highly recommended to add a fan onto the NB. it's toasting hot even on default speed/volt. Jus press the fins together to create a clamp effect, and put a screw thru the fan hole and let the fins clamp onto it. simple. |
|
|
Jul 5 2007, 02:49 PM
Return to original view | Post
#6
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(intune @ Jul 5 2007, 10:45 AM) Im planning to upgrade 6600ES with the 965PT. Have any1 got any issues running ES proc on this board? . Whats the best way to monitor the temp as i know an ES procs cant tell the temp correctly. no issues with ES. use CoreTempthnks |
|
|
|
|
|
Jul 23 2007, 08:55 AM
Return to original view | Post
#7
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(RokXIII @ Jul 22 2007, 01:16 AM) not even 333MHz... If u haven know, the Strap occurs around 385fsb to 415fsb. Try entering 401 straight away. aso the Biostar likes CL 5-5-5-18. try that first. NB voltage Up a NOTCH . i tried with 320,325,and 350MHz... no one can pass, 300MHz can boot and enter into window, but not sure izit stable or not. 400MHz can boot but can't get into window...  btw, my RAM is DDR2 667, so initially i tried with 333MHz, i thought it can boot but failed... |
|
|
Jul 23 2007, 03:02 PM
Return to original view | Post
#8
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(RokXIII @ Jul 23 2007, 01:40 PM) Actually i running my computer with dual booting(vista + xp). So, every time i will boot into window vista since it is my primary OS. Then, this time i tried to boot into XP, guess wat? it can boot in without any problem. Then, i did a testing, i ran orthos for 15 minutes, and 3DMark 05. Orthos can pass without any error for 15 mins, and 3DMark 05 can pass and get the score. Just the temperature very high when i orthos it... yeap so it's obvious that vista is the culprit. who overclocks with vista anyway The setting i configure is 2.8GHz (401 x 7), 1:1, default vcore, 2.0vdimm. Seems like more and more weird problems I encountering now, initially can't boot in between 301-399MHz, then is can boot into XP but not Vista...  |
|
|
Aug 6 2007, 04:48 PM
Return to original view | Post
#9
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
QUOTE(intune @ Aug 6 2007, 03:13 PM) Im thingking of upgrading to the Q6600 would the 965PT supports it..? Im using the latest Rebel Haven Bios. yeap..should be able too |
|
|
Oct 10 2007, 01:21 AM
Return to original view | Post
#10
|
|
Elite
5,784 posts Joined: Jan 2003 From: Shah Alam
|
epsilon, yeah allenultra has faced the similiar prob b4. once on D9, it overclocks no problemo
|
| Change to: |  0.0214sec
 0.51
 7 queries
 GZIP Disabled
Time is now: 12th December 2025 - 03:17 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.