Next time pls include Core Temp screenshot too...
This post has been edited by pcmoddingmy: Sep 13 2006, 12:26 AM
BIOSTAR TFOFCE 965PT/DLX Disscussion
|
|
 Sep 13 2006, 12:25 AM
Return to original view | Post
#1
|
 
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak 
|
1.7Vcore????
Next time pls include Core Temp screenshot too... This post has been edited by pcmoddingmy: Sep 13 2006, 12:26 AM |
Quote|
|
|
|
|
Sep 13 2006, 01:26 AM
Return to original view | Post
#2
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Dude... this is Core Temp
|
|
|
Sep 13 2006, 02:11 AM
Return to original view | Post
#3
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Yeah... it should be correct
 Core Temp is written based on Intel's TAT tool. So, it is more accurate. I'm sure if you run Prime, your CPU @1.7V will go beyond 70C... even water-cooled. This post has been edited by pcmoddingmy: Sep 13 2006, 02:11 AM |
|
|
Sep 14 2006, 01:57 AM
Return to original view | Post
#4
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
E6300 @ 3.3GHz 472FSB on TForce P965 Deluxe:
 |
|
|
Sep 14 2006, 01:17 PM
Return to original view | Post
#5
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(gengstapo @ Sep 14 2006, 08:40 AM) hi there, may i know wat RAMs u use?? OCZ PC2-8000 Ti Alpha VX2 2x1GB CL4-4-4   RAM is not an issue because it was running at 472MHz only. My RAMs are rated to run at 500MHz CL4. |
|
|
Sep 30 2006, 10:31 AM
Return to original view | Post
#6
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Baok, I booted up at 472MHz FSB direct from BIOS. Although ClockGen worked for me, it didn't help much because my CPU maxed out at 3.3GHz.
|
|
|
|
|
|
Oct 5 2006, 05:35 PM
Return to original view | Post
#7
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Knocky knocky!
Any TForce P965 DLX users here seeking for simple pencil VDIMM mod? I have a working pencil VDIMM mod for this board....  |
|
|
Dec 22 2006, 05:45 PM
Return to original view | Post
#8
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
Why look for "VDIMM adaptor" when you can just a pencil to mod it?
 Check out my guide for Biostar TForce 965 Deluxe VDIMM Pencil Mod This post has been edited by pcmoddingmy: Dec 22 2006, 05:46 PM |
|
|
Dec 22 2006, 05:57 PM
Return to original view | Post
#9
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(yehlai @ Dec 22 2006, 05:53 PM) Wao.. thanks for sharing. 965PT can use rite?? No probs... the guide was up for quite sometime already.. hehe965PT is different wth 965PT Deluxe?? Well actually, the 965 Deluxe and 965PT uses exact same PCB. The only difference is the SB chipset (without RAID) and only 4xSATA on the 965PT. In fact, some users have successfully flashed 965 Deluxe BIOS onto the 965PT. Anyways, I suggest you check out the VDIMM controller near the 2.2V jumper just to make sure that it reads "RT9202". If its not the same, I suggest you snap a picture of it and let me check it out. The VDIMM pencil mod should be similar... |
|
|
Dec 22 2006, 11:27 PM
Return to original view | Post
#10
|
|
Junior Member
498 posts Joined: Jan 2003 From: Ipoh, Perak
|
QUOTE(flatfinger @ Dec 22 2006, 09:24 PM) 1 question....this only apply when we set the 2.2V jumper is enabled and shade the resistor rite??...if after shading we set back the jumper down to normal state...the vdimm can be ctrl back or not?? Yes, if you set the jumper back to normal position, VDIMM will be back to normal. |
| Change to: |  0.0269sec
 1.18
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 10:57 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.