BIOSTAR TFOFCE 965PT/DLX Disscussion
|
|
 Mar 27 2007, 12:19 PM
Return to original view | Post
#1
|
 
Senior Member
879 posts Joined: Jan 2003   
|
New Biostar Supporter here.. help me out since i hit the wall on OC..
E6400 2 X 512MB Kingston KVR Hynix C4 PC4200 (533mhz can OC up 800mhz on 2.0V) 2 X Sata, 1 X IDE Rebel Haven Bios Mod : Ip96a921.rh2 At current i can only OC up to 340FSB .. can boot into windows but fail SuperPi 512 & 1MB. I dunno wether my PSU (480W) or my Ram is holding me back.. I will be happy if i can hit 400FSB!!! Please advise!  This post has been edited by intune: Mar 27 2007, 12:20 PM |
|
|
|
|
|
Mar 27 2007, 12:25 PM
Return to original view | Post
#2
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 12:22 PM) Wht PSu u r using now? 480W is good enuf. If Acbel or Antec, Enermax then should be no prob. im using normal PSU.. Try lower the RAM multipler so u can test out how much the max FSB ur proc able to reach. For E6400 i think stock vCore can hit 2.8Ghz easillly. try add some cooling fan.   running on stock vcore.. The other day i tried lowering the multiply but i just wont boot and i have to clear cmos.My casing is open.. is it because NB gettin too hot..? or other issues.. btw im using Hypertx as CPU cooler. This post has been edited by intune: Mar 27 2007, 12:26 PM |
|
|
Mar 27 2007, 12:34 PM
Return to original view | Post
#3
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 12:29 PM) Wht PSU? better dont use iCute type for oc, might burn ur mobo. yea chaplang PSu.. gonna get good PSU soon. Any recomendation? my budget is limited maybe can spend 200-300.Wht vMGH u using? 2.8Ghz dont need too high, unless u got fan to cool down the NB. 965PT's NB overvoltage alot. 2.55v = 1.8+v Anyways i noticed.. Ip96a921.rh2 Bios no multiplier.??  which Bios is the best for 965PT now? Can my hynix C4 (bought from siuann) .. go 400FSB..? my VMGH is at default.. also i cant run TAT on my biostar p65T. This post has been edited by intune: Mar 27 2007, 02:56 PM |
|
|
Mar 28 2007, 12:25 AM
Return to original view | Post
#4
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 27 2007, 08:35 PM) 965PT dont support TAT actually. Yea considering Silverstone. Anyways managed to get to 2.8GHZ on (V)GMH 1.4. Definitely need better NB cooling. Get Silverstone 560W, RM 350 only. |
|
|
Mar 28 2007, 11:55 AM
Return to original view | Post
#5
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Mar 28 2007, 11:36 AM) For me, 965PT's only weakness is the NB, becoz using cheapo HS and runs hot. Overvoltage a lot actually. Thts why it can clock fast but the downside is temp veryyyyyy.. HoT !! applied AS5 on nb hsf and stuck vga cooler on it. VGMH at 1.45V when past 3GHZ . Passed superPi 512/1MB..no errorsBut for now the factor tht bottleneck u is PSU (or might be proc) not the mobo for sure.. becoz 2.8GHz is only mild oc  Didnt want to stay too long due to unreliable PSU..maybe when i get a better pSU will stress test for sure. Apparently all the stability issues gone due to increase of the Vgmh. This post has been edited by intune: Mar 28 2007, 12:05 PM |
|
|
Mar 28 2007, 12:06 PM
Return to original view | Post
#6
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nexus @ Mar 28 2007, 12:05 PM) my 1 idle is 40-42C I thot core2 idle at 32-35?? Try using core temp and speedfan to monitor temp .. so urs consider normal gua This post has been edited by intune: Mar 28 2007, 12:07 PM |
|
|
|
|
|
Mar 28 2007, 12:18 PM
Return to original view | Post
#7
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nexus @ Mar 28 2007, 12:15 PM) har~? great! maybe u shud try prime95 or orthos to stress test.. U dun dare on mind cos chaplang PSU!.. so low 1 meh?using stock kula? btw, i just boot in with 3.0Ghz@1.31Vcore@1.35Vgmh superpi 1M@17s  now wan to run 2XsuperPi 16M to try stability kan cheong for my 1st time OC  |
|
|
Apr 11 2007, 11:39 PM
Return to original view | Post
#8
|
|
Senior Member
879 posts Joined: Jan 2003
|
Ive upgraded my rams to 2GB teamgroup value rams but dun seem to be able to boot my 965PT past 360FSB. Works fine with my previous Hynix C4 tho..
Have anyone tried the pencil mod..? |
|
|
Apr 12 2007, 05:45 PM
Return to original view | Post
#9
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(RokXIII @ Apr 12 2007, 01:25 AM) Ya, thr got someone have tried to do the pencil mod... CUrrently doing DDR 960MHZ @ DDR2 480MHZ 2.0V. Its PC5300 Value by the way.btw, teamgroup value ram not so good in OCing.....  |
|
|
Apr 12 2007, 06:40 PM
Return to original view | Post
#10
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Apr 12 2007, 05:47 PM) AFAIK Corsair VS also can clock at 500MHz. But timing is quite loose. u tried the pencil mod to increase vdimm? |
|
|
Apr 13 2007, 05:32 PM
Return to original view | Post
#11
|
|
Senior Member
879 posts Joined: Jan 2003
|
Im trying to figure out which is the temp for NB in my 965PT.
 This post has been edited by intune: Apr 14 2007, 01:17 AM |
|
|
Apr 14 2007, 11:15 AM
Return to original view | Post
#12
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(beast921 @ Apr 14 2007, 10:35 AM) how come the Temp1 is 127C' perrrghh that like boiling water already. dunno.. i think that not connected to anytin ler.. might be error or sometin. Seen ppl having same thing also. |
|
|
Apr 14 2007, 02:54 PM
Return to original view | Post
#13
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(yehlai @ Apr 14 2007, 12:19 PM) The new BIOS is not bad yeah new bios is great.. got as far as 3.5 on my hynix C4 rams. Just test it yesterday.  LINK 3.81Ghz (423FSB * 9) Mobo: Biostar 965PT rev.1; P96CA404 (Rebels Heavn Mod.) Bios Added on April 14, 2007, 3:07 pm QUOTE(RokXIII @ Apr 14 2007, 11:45 AM) same like mine, my temp1 also shown as 127C, but i hide it! Must be SB & NB? really need to know which is NB..  but i wonder the temp 2&3 is which part temp? This post has been edited by intune: Apr 14 2007, 03:07 PM |
|
|
|
|
|
Apr 17 2007, 08:35 AM
Return to original view | Post
#14
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(nazerry @ Apr 17 2007, 07:01 AM) yea.. mine also got the same prob. quoted for help already, some said it's the mobo's bugs. we got bugged mobo la dude! did u find out which is the NB temp..? i've seen others got their temp correctly.. |
|
|
Jun 22 2007, 02:43 PM
Return to original view | Post
#15
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(RokXIII @ Jun 11 2007, 04:41 PM) Well, in my bios, dun have C1E setting. Have the same problem recently. If new bios cant fix it ..try this:Inside CPU features, there got only "CPU Thermal Control", "Virtualization Technology", "CPUID"..... I disabled all, but still can't fix the problem...  1. right click on desktop 2. select screen saver tab 3. select the power button 4. For Power schemes ..try..Always on! Good Luck!  |
|
|
Jul 5 2007, 10:45 AM
Return to original view | Post
#16
|
|
Senior Member
879 posts Joined: Jan 2003
|
Im planning to upgrade 6600ES with the 965PT. Have any1 got any issues running ES proc on this board? . Whats the best way to monitor the temp as i know an ES procs cant tell the temp correctly.
thnks |
|
|
Aug 6 2007, 03:13 PM
Return to original view | Post
#17
|
|
Senior Member
879 posts Joined: Jan 2003
|
Im thingking of upgrading to the Q6600 would the 965PT supports it..? Im using the latest Rebel Haven Bios.
This post has been edited by intune: Aug 6 2007, 03:14 PM |
|
|
Aug 6 2007, 04:49 PM
Return to original view | Post
#18
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(FLubber @ Aug 6 2007, 04:12 PM) polygon from Rebel Haven forums is ordering a unit of Q6600 to test it out. hopefully it would be a YES Yeah hopefully. I know for a fact that that the newer version with PCB 5.0 Tforce P965 supports the Quad. Not sure about the TForce 965PT. Mine is PCB ver1.0 Anyways i found this from Google. Btw if anyone can confirm this pls reply. Cheers! http://pc11.2ch.net/test/read.cgi/jisaku/1175931447/678 -------------------------------------------------------------- Dear Sir, TForce965PT supports Core2Quad Q6600 CPU but don't support FSB1333MHZ CPU due to chipset limitation. Thanks. With Best Regards =============================== Stanley Liao Biostar FAE Phone: 886-2-22180150 ext.342 E-mail: stanleyl@biostar.com.tw Website: http://www.biostar.com.tw =============================== This post has been edited by intune: Aug 6 2007, 04:52 PM |
|
|
Aug 7 2007, 12:04 AM
Return to original view | Post
#19
|
|
Senior Member
879 posts Joined: Jan 2003
|
QUOTE(ben_panced @ Aug 6 2007, 09:36 PM) heheh.. quad core here i come... but we, the tforce 965pt users are limited to q6600, or other fsb1066 quad core cpu thanks to the fact that our mobo dun support fsb1333 cpu -> hey polygon from rebel's haven forum already tried and comfirmed it..  http://www.rebelshavenforum.com/sisubb/ult...c;f=33;t=000120 This post has been edited by intune: Aug 7 2007, 12:08 AM |
|
|
Aug 29 2007, 11:44 PM
Return to original view | Post
#20
|
|
Senior Member
879 posts Joined: Jan 2003
|
My TForce 965PT Rev1 Works great with my G0 Q6600 . Now Rockin at 3.8GHz.. Im sure if I did the Pencil mod for the Vdimm can go above 4GHz easy..
|
| Change to: |  0.1012sec
 0.61
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 08:59 AM |
Quote