Outline ·
[ Standard ] ·
Linear+
AMD (Malaysia) Official Thread
|
llk
|
Jun 17 2017, 03:02 PM
|
|
QUOTE(seichirosano @ Jun 17 2017, 02:58 PM) ok thanks a lot! can i do it with both ram installed? because my second ram can't be booted alone, most be accompanied by other ram. and replied from seller already, need to RMA  This software is used to repair ram's spd be careful when u try to play with it. Since seller allowed you to rma why not just return back?
|
|
|
|
|
|
seichirosano
|
Jun 17 2017, 03:34 PM
|
Getting Started

|
QUOTE(llk @ Jun 17 2017, 03:02 PM) This software is used to repair ram's spd be careful when u try to play with it. Since seller allowed you to rma why not just return back? ops, i thought only read the info within the ram and compare it. then its fine, i won't fiddle the setting. might as well just send back. was hoping that can get 1 to 1 exchange on the spot though.
|
|
|
|
|
|
AMDAthlon
|
Jun 18 2017, 05:09 PM
|
|
QUOTE(seichirosano @ Jun 12 2017, 09:46 PM) guys, is something wrong with my ram or my mobo, cause sometime when i enter bios the ram stated is in dual channel, sometimes in single channel but still shows total of 16gb. but when i enter cpu-z it shows dual channel. I seems to have the same problems with you. I can boot fine to windows with both sticks but sometimes 8gb of it is reserved in task manager, sometimes 16gb is available as normal and Sometimes it will cold post 3 times Is it because one of the ram is Dual Rank and the other is Single Rank? This is frustrating because my overclock settings are not applied due to this ram problems  It may work for awhile, but after restart cold post again What did you do?
|
|
|
|
|
|
goldfries
|
Jun 19 2017, 12:20 AM
|
40K Club
|
If your RAM sticks aren't loading properly, please set their voltage to 1.35v
|
|
|
|
|
|
seichirosano
|
Jun 19 2017, 06:05 AM
|
Getting Started

|
QUOTE(AMDAthlon @ Jun 18 2017, 05:09 PM) I seems to have the same problems with you. I can boot fine to windows with both sticks but sometimes 8gb of it is reserved in task manager, sometimes 16gb is available as normal and Sometimes it will cold post 3 times Is it because one of the ram is Dual Rank and the other is Single Rank? This is frustrating because my overclock settings are not applied due to this ram problems  It may work for awhile, but after restart cold post again What did you do? i continue use the single channel one and send the dual channel one back for checking. *Update, now even 2666mhz 8gb on the single stick also not stable, after restart will revert back to 2133mhz but can't OC back to 2666mhz, not sure is mobo slot 2 problem or what will go home and try slot 4.  same with up voltage to 1.35v still can't get 2666mhz. This post has been edited by seichirosano: Jun 19 2017, 11:19 AM
|
|
|
|
|
|
ray123
|
Jun 20 2017, 03:53 PM
|
|
Updated my Asus Prime B350 Plus to BIOS 0803 with AGESA 1.0.0.6. Mmmmmm no more cold boot issues~
|
|
|
|
|
|
llk
|
Jun 20 2017, 07:36 PM
|
|
QUOTE(ray123 @ Jun 20 2017, 03:53 PM) Updated my Asus Prime B350 Plus to BIOS 0803 with AGESA 1.0.0.6. Mmmmmm no more cold boot issues~ God dammit Asus! So call flagship board Crosshair hero till now hasn't got official agesa 1.0.0.6 bios, although my ram can do 3200mhz without issue but the cold boost is so annoying everytime i start my pc
|
|
|
|
|
|
keledek
|
Jun 21 2017, 11:23 AM
|
Getting Started

|
QUOTE(llk @ Jun 20 2017, 07:36 PM) God dammit Asus! So call flagship board Crosshair hero till now hasn't got official agesa 1.0.0.6 bios, although my ram can do 3200mhz without issue but the cold boost is so annoying everytime i start my pc  Asrock released agesa 1006 to the Fatality board first (their high end) before Taichi (mid range). although in forums beta ones are for Taichi only (i guess Taichi board owners are lab rats). So strange of asus to not release for the cross hair hero 6 first
|
|
|
|
|
|
llk
|
Jun 21 2017, 12:12 PM
|
|
QUOTE(keledek @ Jun 21 2017, 11:23 AM) Asrock released agesa 1006 to the Fatality board first (their high end) before Taichi (mid range). although in forums beta ones are for Taichi only (i guess Taichi board owners are lab rats). So strange of asus to not release for the cross hair hero 6 first That's why i felt so strange, usually manufacturers will prioritize on those flagship products furthermore i head there is separate team special take care of ROG products. Asus did released 2 different agesa 1006 bios unofficially (not in Asus website), if users not pandai pandai go to forums sure won't know about it.
|
|
|
|
|
|
Ebony & Ivory
|
Jun 21 2017, 09:24 PM
|
|
QUOTE(seichirosano @ Jun 19 2017, 06:05 AM) i continue use the single channel one and send the dual channel one back for checking. *Update, now even 2666mhz 8gb on the single stick also not stable, after restart will revert back to 2133mhz but can't OC back to 2666mhz, not sure is mobo slot 2 problem or what will go home and try slot 4.  same with up voltage to 1.35v still can't get 2666mhz. You use which ram? Corsair?
|
|
|
|
|
|
Ebony & Ivory
|
Jun 21 2017, 09:28 PM
|
|
QUOTE(keledek @ Jun 21 2017, 11:23 AM) Asrock released agesa 1006 to the Fatality board first (their high end) before Taichi (mid range). although in forums beta ones are for Taichi only (i guess Taichi board owners are lab rats). So strange of asus to not release for the cross hair hero 6 first Yup, asrock already released new bios with agesa 1.0.0.6 for most of their am4 x370/b350 mobo. Not bad. This post has been edited by Ebony & Ivory: Jun 21 2017, 09:33 PM
|
|
|
|
|
|
TenSou
|
Jun 22 2017, 03:58 PM
|
New Member
|
1700 for RM1419, should I bite?
|
|
|
|
|
|
llk
|
Jun 22 2017, 05:04 PM
|
|
QUOTE(TenSou @ Jun 22 2017, 03:58 PM) 1700 for RM1419, should I bite?  Tye price has been dropped significantly, i bought @rm1480 2 mths ago
|
|
|
|
|
|
Someonesim
|
Jun 22 2017, 07:17 PM
|
|
QUOTE(TenSou @ Jun 22 2017, 03:58 PM) 1700 for RM1419, should I bite?  Why not ! QUOTE(llk @ Jun 22 2017, 05:04 PM) Tye price has been dropped significantly, i bought @rm1480 2 mths ago When I bought more than 3 months ago, RM1699
|
|
|
|
|
|
llk
|
Jun 22 2017, 07:49 PM
|
|
QUOTE(Someonesim @ Jun 22 2017, 07:17 PM) Why not ! When I bought more than 3 months ago, RM1699  Omg the price drop so much in just 3 months time
|
|
|
|
|
|
AMDAthlon
|
Jun 22 2017, 09:09 PM
|
|
QUOTE(seichirosano @ Jun 19 2017, 06:05 AM) i continue use the single channel one and send the dual channel one back for checking. *Update, now even 2666mhz 8gb on the single stick also not stable, after restart will revert back to 2133mhz but can't OC back to 2666mhz, not sure is mobo slot 2 problem or what will go home and try slot 4.  same with up voltage to 1.35v still can't get 2666mhz. I think BIOS 2.50 has some problems with the Corsair RAM. Before this(on older BIOS) i could set 2666Mhz with single stick of corsair. Now even single stick not working at 2666Mhz Guess gotta wait for another update from Asrock..
|
|
|
|
|
|
seichirosano
|
Jun 23 2017, 06:51 AM
|
Getting Started

|
QUOTE(AMDAthlon @ Jun 22 2017, 09:09 PM) I think BIOS 2.50 has some problems with the Corsair RAM. Before this(on older BIOS) i could set 2666Mhz with single stick of corsair. Now even single stick not working at 2666Mhz Guess gotta wait for another update from Asrock..  you try single stick on slot 4, current result for me are stable to run 2666mhz on xmp profile. no idea why slot 2 not stable
|
|
|
|
|
|
seichirosano
|
Jun 24 2017, 12:39 PM
|
Getting Started

|
QUOTE(llk @ Jun 17 2017, 03:02 PM) This software is used to repair ram's spd be careful when u try to play with it. Since seller allowed you to rma why not just return back? latest update, seller tested with memtest (intel rig) and the ram is fine. so i really dont know what's wrong anymore.
|
|
|
|
|
|
llk
|
Jun 24 2017, 01:10 PM
|
|
QUOTE(seichirosano @ Jun 24 2017, 12:39 PM) latest update, seller tested with memtest (intel rig) and the ram is fine. so i really dont know what's wrong anymore.  Most likely is compatibility issue, if you have extra money i suggest u just buy either Gskill Trident Z C14 3200mhz or Gskill FlareX C14 3200mhz, both are using samsung b die chip which do not have issue for Ryzen.
|
|
|
|
|
|
Someonesim
|
Jun 24 2017, 01:11 PM
|
|
QUOTE(llk @ Jun 24 2017, 01:10 PM) Most likely is compatibility issue, if you have extra money i suggest u just buy either Gskill Trident Z C14 3200mhz or Gskill FlareX C14 3200mhz, both are using samsung b die chip which do not have issue for Ryzen. I read from reddit, FlareX have slightly better chance at getting 3200
|
|
|
|
|