Cantik

Must be response 2 the new intel core i9

Anyone here knows where might I get a Corsair AM4 bracket for my H100i V2? Any help will be greatly appreciated!

guise, i wanna ask which mobo to go for Ryzen.. MSI B350M Mortar Arctic, or Asrock AB350m Pro4 ? can ask here or need to go specific thread?

btw both need to grab via lelong..LYP dont have smh

no

more like response to AMD Threadripper

This post has been edited by pikacu: Jun 6 2017, 12:19 PM

can't wait for threadripper! It's gonna be a beast!!!!

AMD said they didn't change the MSRP for Ryzen though

yeah saw that news as well, hmmm MY indeed follow the suit

Asrock X370 Taichi 2.4 Bios out (Agesa 1.0.0.6). My Gskill Trident GTZR now runs at the speed that its supposed to run @3200. Hynix Single Rank A die 8GBx2. Woohoo. Next see if Rx Vega is worth it in ?August?September
p.s didnt boot on the first few tries until i had to manually re type in the DRAM settings for each and lower down Tras from 56 to 58 if that would help others

This post has been edited by keledek: Jun 9 2017, 09:19 PM

GTZR CL16 ?

Yes CL16 one
load xmp profile
retype all DRAM settings again (same numbers)
Only value changed was Tras bank cycle time from 56 to 58
Bamm
3200MHz

This post has been edited by keledek: Jun 9 2017, 09:45 PM

Wuhuu, checked that my board Killer SLI also got the agesa 1006 BIOS update !

Only minor issue now is Typhoon program (free ver) only reads my RAM once then dont report anymore. Need to close the prog, wait some time then will read again but again only once. Dont know if its due to the nature/limitation thats its free or not.

ops, after i restart computer twice. not that stable already, sometime can pass windows sometimes can't. i haven't manually try to set the timings yet, will try when i reach home see whether it's still the same .

I noticed earlier that if just loading XMP profile, the DRAM setting picked to use by my mobo is for CL15 and not the JEDEC programmed 16 18 18 18 36 one.
IINM read somewhere non Samsung B die odd DRAM setting numbers doesnt agree with Ryzen IMC for some reason. (Although my RAMs ran at CL 14 on Bios 2.0 (@2400MHz - max able to boot ..sigh) and then ran at CL15 on Bios 2.3 (also @2400 Mhz max).
I just did a "might as well lah..." thing and re type all the DRAM setting manually again (thinking how stupid it is just retyping same numbers) and was surprised it booted and used the CL16 setting now.

wow, i really cant wait to try manually set it now. was using xmp 2.0 16-18-18-18-35 1.2v

wow, i really cant wait to try manually set it now. was using xmp 2.0 16-18-18-18-35 1.2v

[/quote]

i would believe XMP would use overclocked voltage of 1.35v if not mistaken

i feel lucky since everything else was default. Didnt need to play with all those SOC or proc odt voltages

[quote=keledek,Jun 10 2017, 11:17 AM]
wow, i really cant wait to try manually set it now. was using xmp 2.0 16-18-18-18-35 1.2v

[/quote]

i would believe XMP would use overclocked voltage of 1.35v if not mistaken

i feel lucky since everything else was default. Didnt need to play with all those SOC or proc odt voltages

[/quote]
i think i have to manually set to 1.35v, i'll try set around the timing

i find it weird, there';s only two option for me to choose either load xmp profile or [auto] .if i choose [auto], i can't set the ram frequency ( that option disappear) but i can set the dram timing. and i cant any option to disable xmp on asrock gaming k4 x370
even if i load xmp profile, my ram still runs at 2133mhz.

Updated my X370 killer sli to agesa 1006 BIOS, not perfect but better now.
Pre agesa 1006, can only run DDR4 2400
Post agesa 1006, can run DDR4 2933 now, but need to pump voltage to 1.38V. I've set SOC voltage manually to 1.2V to ensure stability.

I still can't get better results on my msi board. But asrock is sending me a taichi so fingers crossed. Mind if we link up on Facebook so I can perhaps pick your brain on some overclocking settings bro?

SOC voltage don't go too high. I've read that it may reduce the lifespan of the cpu. Try to keep it lower than 1.2v.
Usually they increase the dram voltage and some other extra settings that is unlocked in agesa 1006 like procodt? And command rate.