D9 chips have compatibility problems with DS3, till now Gigabyte still haven't solved this through their BIOS updates.

Btw, what brand is your RAM?

micron oem..

Where to get this RAM? I'm getting fed up with my crappy CVS

mayb is from mjoe?

ya..it is from mjoe..but only 512mb per stick..

Sure sure.. but i tried ledi.. cant get clear focus with my 1.0MP hp camera.. i copy down the chips code ledi.. will post it ASAP. BUt Corsair chips all relabled one.. dont think anyone can recognize them...
They say micron chip got green Dot at the corner of chip.. my chip also have.. maximum can go 870Mhz.. im not satisfy with it.




i might consider to sell it.. after my final exam and try higher OC.
Bought this RAM less than 2 months..




Are u sure?? when u open Orthos u can see the instruction tht say " Sys. is running more than one core. Please run another Orthos " something like this will show. BTW coolice wht vers. r u using??

This post has been edited by yehlai: Oct 29 2006, 02:52 AM

ya
http://sp2004.fre3.com/

wat u mean wat version?orthos?or u mean board revision?

Yes im using same vers. oso i think.. state there need to run 2 Prime simutaneously...
When u open tht progeamme oledi state there....

This post has been edited by yehlai: Oct 29 2006, 02:22 AM

@Gengstapo
Are u using KVR 533 with hynix chips?? this RAM outperform my CVS 667 when OC.. Now i found a new KVS 533 with price quite cheap.. about RM 160 for 512MB. Izzit worth to downgrade my CVS 667MHz to KVR 533Mhz since KVR doing really good for OC.. gimme some advice pls.
I saw tht chips lable 'Hynix XXX-C4 'also. izzit good?
I might get 2 stick of em' only cost RM 320... hehe.

This post has been edited by yehlai: Oct 29 2006, 02:32 AM

WAH LAO...ppl say orthos onnly need run 1 program...u use sp2004 of cz need run 2 lar

ORthos

This post has been edited by yehlai: Oct 29 2006, 02:48 AM

DDR3 compatble with current setup??

if im were u, sure im downgrading to kvr 533 but with onli hynix chipset la
just get em' since it oc quite well + lower price.

actually, im oso using cvs 667 b4 but i found its $uck$, that y im getting my current 533

dudes, dont judge the ram with its brand lor i had cvs 667 but is capable around 1050fsb

not the brand larr, its bout the chipset used for the ram

Usually you guys use orthos to prime your CPU or RAM or both?

I see most of you guys just stress your CPU using the gromacs core only. Most of the time I can pass this test for more than 10 hours but when I start to stress my RAM, it'll fail after merely 1 minute.

may b ur ram not enough juice?

Obviously yes, poor CVS

Blaxez, how's the overclockability of that chips? I saw alot of this kind, but not sure how well it goes....

I can say it sucks, it's not even stable at 400MHz 5-5-5-15 and +0.3 vDimm. It has been limiting me all the time from going beyond 3GHz.