Yea.. As TerryZeroX said, u can get the bios at Giga website. But beware that you know what Flash is...

For the ram frequency, u only can use 800Mhz divider and oc to 1066Mhz. So that is meant u can achieve 1066Mhz by overclocking but not default speed


-pWs-

yar about the falsh. how to do it?

try to do some reading on gigabyte's site theres a manual/explanation provided

ok than
thanx

---

Added on May 19, 2007, 11:00 amcantfind it


This post has been edited by guckks: May 19 2007, 11:00 AM

hi guys. i just got my new rig thanks to jy14. i havent really done OC-ing yet coz im noobie at it.

once i get to know more i will surely update here to compare with u guys.
here are my specs btw as well as screen.



3600+ X2 Brisbane G1 | awh85 | Biostar TA690G | 1GB Kingston DDR2-667 Hynix | Stock HSF | Stock clockspeed

This post has been edited by awh85: May 19 2007, 07:53 PM

Owcchh it's a sin to run it at default speed. Whack it up hire

nice rig u have there awh85.

push the CPU to 3.0ghz!

nice mobo and nice proc
i lepak in a few china forums these days, alot of chinamen playing with TA690G + brisbane combination now. Very hot combination in these days

Wow...another Brisbane user.
Clock it to 3.0Ghz


-pWs-

just some news to Abit KN9 family board.

recently ive received a lot of blue screen.Fedup of it.i unOC the cpu.
still BSOD..after some hard thinking.seems like there is some issue with Silent OTES.Crap design!!........the NB heatsink is too blardy hot!!i cant even survive 3sec touching test..

so i retrofit a small fan on top of the heatsink.temp down like heaven and earth..
no more BSOD.and im back at super clock.......

Bro..u'r cpu+mobo still virgin??

*** please do some oc..coz i also interest to get it my still confuse


heheheh...biase la.malu2 kucing

This post has been edited by sjn hassan: May 20 2007, 12:26 AM

hi ppl... here's my 2nd rig.. nothing much yet

forgive me father. i will do so once i learn more about OC-ing. but for me, i feel the current performances are already beyond heaven compared to my old s370 p3 rig.

will try in future. tho i prefer a little stability and not so much heat.

yea. i read a few reviews from the china sites (google translate) before taking the plunge.

happy to be here too

virgin

u won't feel much heat from a brisbane core.

For ur rig, the only concern if u want to oc is the power supply.
Not a good PSU though.

Brisby user welcome! Start overclocking your brisby now its a sin to run at stock clock like kucingfight said

---

Added on May 20, 2007, 1:12 pmguys any answer to this?

This post has been edited by TerryZeroX: May 20 2007, 01:12 PM

Pull off the bloody silent OTES, rip off the bubblegum and put some real thermal paste there. Thats one thing Abit f***ed up badly.

And yeah, its SILENT otes-no fans. Case ventilation must be good lar...

Not really, the extreme power 430W is actually reliable
http://www.jonnyguru.com/PSU/eXtremePower430W/

wahh...???
everyone going to Brisbane??
all 3600+??
why not try use 4000++??

see the OC difference...

This post has been edited by sempronic: May 20 2007, 09:48 PM

@sempronic

If i am not mistaken, brisbane 4000 din clock well if compared to 3600.
I only found one review overclocking brisbane 4000 and the result is not impressive.

http://www.amdzone.com/modules.php?op=modl...rtid=283&page=1


-pWs-

w0ot total pages ady >100

not considering to vreat v2 arr??

sory guy cause i'm noobie about O'C

this is my spec

AMD 64 X2 3800 @2100HZ
ABIT KN9 SLI
CORSAIR 2x512MBDDR2
COOLERMASTER HYPER TX
MSI NX7900GS
WD 200GB IDE & WD 200GB SATA II
POWERLOGIC ATRIX 5000
COOLERMASTER EXTREME POWER 430WATT

same as sempronic i think
but i can't OC my proc more than 2.1ghz..
what is the problems?





Attached thumbnail(s)