I think u got a nice batch of 3600. Hehe
So what speed now? And what the vdimm for ur ram? Is it micron d9??


-pWs-

errr... i can set back to default now... but what is HTT? is it a multiplier?
I look into my bios side an i can find the CPU clock speed.. but not the memory one.....

Yeah! Another NF-M2 nview user. I'm almost ready to overclock mine, just a few last things to get out of the way. Been very busy since I got it, no time to really play with it

Soulfly, hope you can figure out how to get past the 250HTT barrier. It can clock quite high using clockgen (300+++, which some other people have managed also), but if I OC from bios it will not boot past 250-253. Then again, I haven't had time to really play with it..scarcely even started exploring the voltage and timing options..

This post has been edited by lohwenli: May 16 2007, 08:14 PM

I'm also very busy currently... this week got a few assignments due... but just managed to let myself install the mobo

I even cut my thumb when I was installing the I/O plate

Hmmm managed to hit 250 htt so far but not rock solid yet. gonna orthos whole night later


wonder how far can my lousy ga-m55sli-s4 go

This post has been edited by TerryZeroX: May 16 2007, 09:37 PM

ya hypertransport is maybe block ya cpu to get more htt / fsb...
drop LDT to 3X to gain more maybe....
still cannot catch any brisbane to try yet in penang... damn

dun forget to drop your ram speed too to left more room to test the cpu top speed

get it from the bulk lar...

still 2.973 with 313fsb.. even raise 1 fsb prime not stable..
donno wether cpu reach the limit or the ram cannot push anymore...
it's a normal KVR with kingston chipset.. but i give 2.2v like that to let the timing tight...

normally HTT should below 1000
i donno about ur board.. try googling around..

HTT is best around 900 to 1000...that what everyone think of it...
it will increase when u OC ur system....
u can control it by set it to 3x...suggested by all...

This post has been edited by sempronic: May 17 2007, 09:25 AM

Siao change to a new mobo don't tell me ar??? Berani kamu.. Don't make me go to ur house and burn ur mobo.. Jeles okeih.. Miahahhaha..

almost similar problem here... only that mine is stucked at 280.

currently flashed to earlier bios (9/1/2007) ... it does 285 currently.

and i agree.... with clockgen it can go as high as possible,

yeah will do, i'll use this speed for now 1st. another 1 or 2 days later only continue to oc

got buyer for the proc n cpu both la bro..
i thought want to setup EE HTPC.. but the board minimum voltage option is high..
if u want i can subsidise u RM50 to change to brisbane.. lol

Miahahahaha, RM50 ar? Later ar coz a bit tight for cash these few months.. Huhuhuhu.. Still haven't got the fundings to buy even a decent cooler pun.. Huhuhuhu.. But i'll take ur offer later

Hi,

Ur system is using the D9 chips with the Athlon, just as ur sig says ?

Will my D9 be able to reach 280 also ? Wonder will my bulk brisbane be able to reach 3GHz like -pWs- ? hmmm

try it first ar.....
as all we know...all brisbane is capable to go up to 3.0ghz...
about ur RAM....u also need to try....then u can know.....
and share with us all the result....


This post has been edited by sempronic: May 17 2007, 12:49 PM

my rig 5200++, mobo m59sli-s5

the prob is i cant change the multiplier for my proc. can anyone help me

downward also cannot? weird bios..

thats y lor. cant get optimize clocking