don't trust the cpu-z reading..

err.. 3x cpu mul?

Don't trust cpu-z? Then what to trust?

Check cpu-z after complete calculating SuperPI

I trust Everest more than CPU-z... CPU-z gila program..
Last time it showed my pentium 4 using 2.3v...
Now use on AM2.. Cannot start sometimes.. Straight away delete it..

is brisbane core print mark show..

"Diffused in Germany"
"Made in China"

FAster brisbane guys...oc the thing

"Diffused in Germany"
"Made in Malaysia" , any diffrence ??

china made normally require more voltage..
but for sempron 'diffused in singapore'..
i believe 65nm fab in germany..

hi everybody.i m newbie +noob at here.
is here anyone using asus M2N-E motherboard?
my mobo for adjust ram voltage only max can 1.95v.
n my processor voltage max just only 1.525v
when i wan to push to 270 x10 my voltage adjust to maximum it still cant boot.y?
at 260 x10 the voltage alr need adjust to 1.500v then can start window.
can i oc my ram to more high speed?cos now i set at 533 only.
somebody can help me?
my pc spec:AMD athlon X2 3800+
ASUS M2N-E bios 0802
RAM MUSHKIN 1GB 667 DDR2
colourful Geforce 7300GT 128M
PSU AcBel Intelligent Power 450W

at 2400MHz

at 2500MHz

at 2600MHz


This post has been edited by ping86: Mar 27 2007, 06:26 PM

its seem that your proc already hit the wall.. Asus M2N-E Vcore max till 1.525v only? max ram till 1.95v? aiseh... really can't go far with this mobo i think..

you've made a big mistake buying an M2N-E ... should've consult other first

mmm, why i use cpu-z my core speed readings 1000mhz to 1900mhz and the multiplier jump frm 5x to 9x ?? n my htlink is 1000mhz ???!!!

din't get what u are trying to say.. mind to show us the CPU-Z shot?

oh shit........then going to sell my mobo now. ASUS M2N-E so suck. so got any nice mobo can intro me? haha. maybe this pc fair go to c c.

the core speed in cpu-z it will jump ... frm 1000mhz thn to 1900mhz , the numbers dont stay same

That is CnQ function.
It will adjust back to full speed when u using the processor.


-pWs-

get this --> http://sg.vr-zone.com/?i=4726&s=4

retailed about RM335 at ATE i think.
vdimm can goes up to 2.95v..

running 265 now @ 1.325 vcore..will test further later on..idle temp around 34C n load at 39C on my noctua NH-U12F..temp from thermal probe

biostar tforce 550SE

Wan to ask whether is it using stock vcore???


-pWs-

Ouch... its not that bad lah its really stable and just not an extreme overclocker

don't hate it yet, its a good board in the right hands... i kind of regret selling mine, but PM me if you wanna let go.

-pWs-,

nop..set to 1.325 from 1.3

like dat only i manage to get it stable