Nice ar...mine 3800++ Windsor 2.5Ghz already need 1.475vcore
Really hope that jy14 organize the 2nd bulk, but seem nobody want to order


-pWs-

now doing 270 still 1.325 vcore

the abit kn9 ultra hav issue running my ram in 667..drop to 533 everything run fine now

Wow ..nice
Do you write down ur processor batch code??


-pWs-

Yo abg soulfly i did some tweaking a bit.. Here's my new result, wanted to try push higher but scared coz running on stock HSF... So update me ya...

3600+ X2 Windsor F2 | cloudwan | ABIT KN9 SLi | Kingston DDR2-667 | stock AMD cooler | 2600Mhz



But kinda penin cpuz doesnt show it as 2.6ghz.. Kept going up n down a bit... Hmmmm..

This post has been edited by cloudwan: Mar 27 2007, 11:16 PM

sry, can i ask which program u all use to c the vcore? since the cpu-z is shot shot. is it 3800+ run at 2500MHz by 1.525v is normal?

Yea...it is normal. Me now also 2.5Ghz @ 1.475vcore. One reminder for u, watch the temperature.


-pWs-

291 @ 1.35V

very very nice! whats the temps like?

lol finally u made it..
set 261 la.. RAM CL can set to 4 though..

Im slow. Brisbane in stores already?

Iyer ler i know i been a bit slow.. I been swamped with things to do only recently had the time to tweak it a bit... If i had used an aftermarket HSF like ur Noctua i think i'll try to push it even further.. Don't want to have a burned CPU yet ler.. but lookin at the brisbane O/C result makes me kinda itchy alredi.. Hehehehe

Yea...You can order from bulk order section d

What are u waiting? Change to brisbane


-pWs-

This post has been edited by -pWs-: Mar 28 2007, 12:53 PM

idle ard around 34C to 36C depends on how hot the day is.. n load around 39.5C like dat..

holy moly.. using stock cooler or noctua.. must grab 1 la like this..

WoW .. That good ar.... I'm getting itchy all over... U check the temp using whut? Speedfan ka? Hmmmm

He is using noctua if not mistaken. But still temp so low at that speed.
I damn like it

You want to grab also? Fast lor...need MOQ 10 le...now only 4 ppl taking order


-pWs-

yeap..the temp is low coz using noctua nh-u12f n couple wid the silent fan..temp taken from my fan controller with temp monitoring..installed everest n get the same temp reading as on my fan controller

should go grab it..300 is really worth it..cheap n oc high

opps....... that time too excited n forgot to copy it. now i c the box it didn't write.


got. i go check again the voltage then i found that actually i m alr using 1.525v alr. n my mobo maximum is 1.565v. the temperature is <45c. is ok?

wow vcore alr 1.565, temp still lower than 45c...
is it full load? if yea very gud man...

Are u using brisbane core?? 1.525 vcore? A bit too high for brisbane core



-pWs-