bro, it depends. If the wiring was not there in the 1st place, cannot main.
Need to check with the SC if the original wiring is there.

Buy the way, what is the damage for the rear fog lamp?

Its about RM260 without installations.

Btw, this post already more than 2500 allowed. Shall we start V3?   

Where did u get it bro....sc or acc shop...

How does the 500km or 2 weeks apply for service?
I called and book for my 10k service 1 month ago (odo almost 10k), I got scheduled for a service 1 month later. But now my odo is at 11k++

What does this mean and how does it apply to the 500km or 2 weeks clause?

Do I need to pay for me 10k service?

How does the 500km or 2 weeks apply for service?
I called and book for my 10k service 1 month ago (odo almost 10k), I got scheduled for a service 1 month later. But now my odo is at 11k++

What does this mean and how does it apply to the 500km or 2 weeks clause?

Do I need to pay for me 10k service?

Happy father day!!!

Anyone here send their lion for decarbo to @pugs tkl?.
Any idea how does this sifu do?

These are 'guide me home lights'. The concept was to provide lights when you drive into your garage jn darkness. The default setting is only a few seconds to conserve battery life. It can be set to flash longer if needed.

I not quite sure what the real problem on brake dust created the sound. But I have experience before, it could be brake pad not fix properly or materiel of the brake pad not compatible. Example using a full high grade brake pad for racing car which can stand higher temperature or harden brake pad on normal disc brake. This will wear and tear for disc brake rather then the brake pad and this is one of the reason create the sound from the brake edge. To remove the sound of this, they usually scheme out the edge of the brake pad. You can try

The brochure call it "follow me home"? If so, why happens irregularly...

Correct. That is the very question that has been doggin' me for months.

I not quite sure what the real problem on brake dust created the sound. But I have experience before, it could be brake pad not fix properly or materiel of the brake pad not compatible. Example using a full high grade brake pad for racing car which can stand higher temperature or harden brake pad on normal disc brake. This will wear and tear for disc brake rather then the brake pad and this is one of the reason create the sound from the brake edge. To remove the sound of this, they usually scheme out the edge of the brake pad. You can try

Condition for activation:
1. Lights set in auto mode
2. Low outside lights
3. Ignition switch from on to off

I am very surprised by your question. Do you think your engine needs a decarb job. What is your mileage?

The follow me home function works fine.  What I was referring to is only the indicator lights flashing like when the doors are locked via remote but this happens when you turn off the engine and open the door.

The brochure call it "follow me home"? If so, why happens irregularly...

Correct. That is the very question that has been doggin' me for months.

Condition for activation:
1. Lights set in auto mode
2. Low outside lights
3. Ignition switch from on to off

The follow me home function works fine.  What I was referring to is only the indicator lights flashing like when the doors are locked via remote but this happens when you turn off the engine and open the door.

It will flashing if u pull the door handle lightly, untill u unlock ur door but not opening it.
Otherwise, when u straight fully pull the handle and open the door at the same time. No flash.