It will flashing if u pull the door handle lightly, untill u unlock ur door but not opening it.
Otherwise, when u straight fully pull the handle and open the door at the same time. No flash.

JOKE of the day: Don't shoot me if it is not funny
Perhaps why it (the follow me home lights) did not flash is because, you were not coming home? 

It will flashing if u pull the door handle lightly, untill u unlock ur door but not opening it.
Otherwise, when u straight fully pull the handle and open the door at the same time. No flash.

My coolant is at the minimum level now, last service on Feb, next schedule end July.
I noticed my coolant level cant last for 6 months for service interval, last time also same. When servicing, SC will topup to the max level, but after 4 months, it dropped to the minimum level. Is this normal?

I bought batt water to top up the coolant, still got alot left over batt water. How long can the batt water be kept?

My Osram NB dead yesterday.
Last for 1 year 3 months.
Any suggestion for new bulb?

Mentioned in earlier post best to use pre-mix coolant, otherwise it will keep diluting when topup non-coolant liquid

something is wrong, i've only topped up less than 200ml after 18 months

another set of NBU - night breaker unlimited

powerbulbs has 20% off until midnite today

My coolant is at the minimum level now, last service on Feb, next schedule end July.
I noticed my coolant level cant last for 6 months for service interval, last time also same. When servicing, SC will topup to the max level, but after 4 months, it dropped to the minimum level. Is this normal?

I bought batt water to top up the coolant, still got alot left over batt water. How long can the batt water be kept?

How much is a set, improve performance than Night Breaker Plus?
Stock bulb is sucks...

RM90 today only

never bought before but that's the latest from osram

Link?

http://www.powerbulbs.com/product/night-br...h7-twin-blister

disclaimer: i'm not related to the website 

Now, You remove the power cable first and then use long type screwdriver at point 1 if you don't has star screwdriver on hand (Hints: short type screwdriver very difficult to turn the screw)



Me, I remove the star screw first (point 2) so I can take down entire black housing. I can easily remove screw at point 1.
After you remove screw at point 1, you will see the two clip (next to the screw) at each point 2, "un-clip" it



Then, you can take out the bulb mounting, like picture below



If you want take out the bulbs, don't use hand, use masking tape. Don't press on top to the bulb directly (to avoid break). Use tape wrap on top of each bulbs, gentle pull it left-right until it loose. like picture below