I wonder who's that.

Probably all those who sell Crucial rams.. Cheap but high performance one....

Crucial can consider cheap?

anyone using Kingston hyperx 667mhz ddr2 ram ?
the higher oc achieve wat level ?
can hit 500mhz ?

HyperX sure can hit. maybe @ 55515. My friend's Team Elite also can easily hit DDR2-1000 @ 2v.

No.
Hyper-X model lower than PC2-8500 @ 1066MHz uses crappy infineon AF-3S chipset which is not overclockable at all.

Do research before you post about things you're not really sure about.
Hyper-X models below PC2-8500 @ 1066MHz uses crappy Infinieon AF-3S chipset.

Even Hyper-x PC2-6400 @ 800MHz use AF-3S chipset too.

You want an overclockable Hyper-X rams? Buy those Hyper-X above Hyper-X PC2-8500 and above models only.
As those Hyper-X uses Micron D9GKX chipset.

Team Elite is different, because all Team Elite Rams uses ProMOS chipset that is proven to be able to run at 1000MHz, but at a relatively bad timings.
Not as good as Micron D9GMH @ Micron D9GKX @ Micron D9GCT.

hyper-X not overclockable , i do research whole day ! almost bad rumor ..

i had 1 pair of 512mb kingston hyper-x ddr800 did 920mhz at 4-4-4-12 at 2.2vdimm... so i guess it's not that bad... if at looser timing i guess it'll still climb a bit higher in mhz...

rumors ar bad after all u need to test it first then u knoe about it

recently my hyperx reach 866mhz only (default 667 1.95v )

I thought even my Patriot value can hit DDR2-1000, so I think the so called hyperX can do it.... haha

wat is ur patriot ram chip and default freq ?

Forgot already, but really need 2.2V and only stable @ 56618.

Managed to tweak my rams further....

Timings : 4-4-4-4
Speed : 950mhz
Vdimm : 2.1v

Pass memtest x3 passes
Pass superPI 32M
Orthosing using blend test......


Attached thumbnail(s)

i used to have a corsair value with crappy elpida chips that can do the same speed/timing/voltage as yours
plus... it's cheaper!

now...

does anybody have systool with older build?

This post has been edited by soulfly: Aug 7 2007, 02:54 PM

hey guy , any ddr2 value ram with D9 chip to introduce ?

currently, from the previous findings of D9 on Value rams, are only D9NHL. Even then is hard to find them now. Mostly on Elpidas now

Not all Micron D9 chipset is a good overclocker.
Only three model that is confirmed to be a good overclocker. That is, D9GCT, D9GMH & D9GKX.

Nowadays?
You can only wish.

As most valueram that comes with those three chipset i state up there is nomore.
You can only get 2nd hand ram in the garage sales section.

ocz is releasing spd reprogramming utility for their range of rams... kinda cool huh...


soulfly,

yeah i know that, i even using team value ram now which can go beyond 1000ghz but see, buying value rams really like try our luck to get it work at higher speed but high performance ram r guaranteed to work at rated speed mar...

that spd programming stuff is a bit silly. instead of hard setting the ram, better use BIOS setting. set too tight via spd and end up with silicon+chip bookmark