wah.... rlhc17, is it memtest stable onot???

i got a problem here... i can't mix my rams (2x 1gb team vr & 2 x 512mb kingston hyper-x) on my mobo... i can run them in pair independently (means 2 x hyper-x n 2 x team vr seperately) at more than 400mhz (800mhz effetively) with same vdimm, same timing, same every other setting... but when i have all 4 rams running, they boot into windows but fail most of the softwares... n they oso run much slower... any idea???

currently running at 400fsb x 9 with team vr... stable... i thought it was bios problem but some other users at abit forum confirm the new bios (same as the one i'm using) is ok to work all 4 dimm slots... now me oso blur... is it i can't rojak my rams???

any 1 has any idea if ocz pc2-6400 performs??? titanium, platinium, ops, corssfire n sli version... i tried the crossfire version (i guess it's promos chipset as i read it somewhere)... can gimme any comment of these ocz rams??? tq...

how bout D9GCN...?

that's very nice... i tried oc the ocz ddr800 ati version to 900+ 4-4-4-12 at 2.0 but 2.2 doesn't help to keep them above 950 at 4-4-4-12, got to lossen to cl5... never got to mood to try further... will try ocz platinium or reaper once i got them... c if i got the luck...

u really kiasu 1... lol... 1st try terus 500mhz... hahahaha... but feeding more vdimm or loosen the timing oso cannot a???

me oso running 2.3vdimm for few months now, the ram is still ok...

i've tried to run 800mhz with 4-4-4-12 n 1000mhz with 5-5-5-15 on my oced e6600 (400 x 9) but ther isn't much different... the 800mhz setting score lower time in super pi 1m n 32m... if the ram can run at 1000mhz with 4-4-4-12 lor 10 then i do believe it'll gain a slightly lower time in super pi...

sorry only in 2T, i'm using 975x mobo so no option for 1T leh...

sometimes i can run memtest stable but still need to add a bit vcore to run orthos blend test stable...

i had 1 pair of 512mb kingston hyper-x ddr800 did 920mhz at 4-4-4-12 at 2.2vdimm... so i guess it's not that bad... if at looser timing i guess it'll still climb a bit higher in mhz...

ocz is releasing spd reprogramming utility for their range of rams... kinda cool huh...


soulfly,

yeah i know that, i even using team value ram now which can go beyond 1000ghz but see, buying value rams really like try our luck to get it work at higher speed but high performance ram r guaranteed to work at rated speed mar...

got them from US coz they look nice...


ocz crossfire ready ddr800 2gb kit (red)



ocz platinium rev.2 ddr800 2gb kit



ocz reaper ddr800 2gb kit (heatpipe)

ok, i'm not a good ram ocer but these rams look nice so i bought them, n will sell off 1 or 2 pairs after testing... my mobo (975) can only go nothing more than 1100 or even in most case 1050mhz for ddr... so if can run at 1000mhz, then i think these rams should be good enuf... i'll see how much can they go... any1 tried them before care to share???

hmmm, not a problem... coz maybe end of the month i go kl for 1 week.. so i can pass it to u lor...

ur p35 should be able to go much higher...

my fren brought it back for me... i saw them in websites...

hehe... that ocz reaper looks perfectly on my aw9d-max... all black heat sink with heat pipe... the red 1, i'm planning for abit f-190hd matx... with 2600xt but dunno lar if the i'll continue with that... the platinium 1 oso very nice but u might get a lot of fingerprints on them...

1030mhz at cl4... impressive... mind if i ask wat's the vdimm???

funny, last time memtest failed but orthos belnd test for 12 hours no prob... superPI 32mb oso ok...

rlhc kvr with d9gkx can reach ddr1000 with 4-4-4 timing... but i dunno how much vdimm he shoot... so i guess maybe d9gkx, i ried a few rams trying to get stable at 1000mhz with 4-4-4 timing but failed (max i pump is 2.3)...

kiong 1200mhz with 5-5-5-15??? wat's the vdimm??? is it stable??? ie. memtest, orthos or occt???

This post has been edited by HaHaNoCluE: Aug 31 2007, 08:52 PM

no prob for that... lots of lyn members been running the team value ram (667) with d9 chips for more than 800mhz 4-4-4-10...

bro, have u tried lowering the vdimm... crucial usually need lower vdimm to operate at 1000mhz compare to other brands... n it's usual dat crucial heat spreader is a bit hotter too... u might need ram cooler (fans) too...