.. . 3 D9 valueram no more in market ..
the only way is save $$ buy high performance lo ...

RAMs with Hynix FP-S5 chipsets still around? and how to identify the revision?

my D9GCT suddenly act weird and my TA690G cant boot.Its all happened after i memtest both stick and found lots of errors on test 5 and 6.Btw during the test the ram setting is by spd or default.After i upped my vdimm more than 2.2v then the board cant boot and diagnostic led shown memory error.Now i plug my fren KVR667 and its all good.Plus if i stick KVR667 wit my D9 it could boot.So shud i RMA the ram n there goes my D9 izzit?

editted:
After reading some ol thread at XS regarding D9 dead issues i found that i need to set vdimm up to 2.2v for my D9 to boot up.Default vdimm 1.95v cant power up the system
Thanks in advance

This post has been edited by Algojo: Aug 9 2007, 05:49 AM

Why in the world do you want Hynix FP-S5?

Those are Great Chips. equalling or better than those OCable D9s. VR zone has a review on it.

I knew that lol.
But then, it's really hard to find the good revision of FP-S5.
IINM, the good revision of FP-S5 is revision B, correct?

Which FP-S5 revision B is really hard to find.

Instead of pushing yourself to get a hard to find FP-S5 Revision B, why don't you just go and find D9GMH?

EDIT: I forgot to tell one thing, FP-S5 Revision A is a big sucker in overclocking.
Been there, done that.

* I can only post about this after nakata101 has finished selling those ram that he sell that uses FP-S5 Revision A chipsets. Don't want to ruin his sales, that's why i never tell anyone about this

This post has been edited by sHawTY: Aug 9 2007, 09:03 AM

guys,mind to post their everest bandwidth result?as well as the memory speed and timing
need to know with wat speed and timing to achieve 11k bandwidth

like this?

sorry..i mean intel

intel can get meh?

everest..not sandra

Look like Intel P35 chipset is more ram OC friendly compare to P965 chipset

CPU : Intel(R) Core(tm)2 Quad processor Q6600 G0
Motherboard : Biostar TP35D2-A7
RAM : 2 x 1GB KVR DDR800 D9GKX
RAM Timing : 550MHz, CL4-4-4-12
Vdimm : 2.35v



Attached thumbnail(s)

nice OC there br0.. now considering to get the same budget boards as my current p965 chippy believed unable to handle beyond 400mhz for quad-cores overclocking.

what a waste, now only running at 2.7ghz.. zZZzz

Yup, with my ex-dfi infinity P965 highest fsb i get is around 415 only
maybe u can try Abit IP35 or IP35-E both r value mobo

hey guy , i want ask some ram question
my ram is kingston hyperx 667mhz 2X512mb,default v1.8
1.i oc to ddr2 ram to 417(834) with vdmim v1.95 .
2. vdmim v1.95 will damage my ram or reduce my ram life ?

dun be worry, 1.95v still consider very safe for ur RAM...

ballistic tracer pc6400, can do 4-4-4-4 at 410mhz?

99% can
usually can go up to 500mhz with add vdimm

This post has been edited by rlhc17: Aug 12 2007, 02:30 PM

got them from US coz they look nice...


ocz crossfire ready ddr800 2gb kit (red)



ocz platinium rev.2 ddr800 2gb kit



ocz reaper ddr800 2gb kit (heatpipe)

ok, i'm not a good ram ocer but these rams look nice so i bought them, n will sell off 1 or 2 pairs after testing... my mobo (975) can only go nothing more than 1100 or even in most case 1050mhz for ddr... so if can run at 1000mhz, then i think these rams should be good enuf... i'll see how much can they go... any1 tried them before care to share???

bro.....let me test can ka !