It seem like RT N-16 is out of stock everywhere in KL.

is there any other Asus model to be recommend by sifu here ?

I'm going down to lowyat to hunt the N-16,but I still need a backup plan incase really cannot find. (My other choice is hunt in HK when I'm travelling there end of the Feb.)

hmm cant seem to configure IPv6 on stock firmware with AC68U, is there any tutorial for WAN IPv6 ? managed to get LAN IPv6 running only

purchase the RT-N14UHP yesterday as a replacement router for unifi since N16 is a discontinue model.

manage to get set up smoothly but how come my wireless only connect at 150mbps only ?

currently setting is set to wireless N only with 40 mhz.

is there any steps I miss out because N14UP is a N300 router which are capable of 300 mbps but I can only achieve half the speed ?

Is your Unifi router still turn on and connected to the modem? I use to have this issue and it seems that there is a conflict with my Maxis router WiFi for some reason. It is already disabled, but my devices can still locate it (WTF). Try to turn it off as a test, my WiFi have not intermittently broke anymore.

By the way, to restart your WiFi connection you need to access the router, change the wifi name, and then change it back. Works for me everytime, but I get pissed off after multiple wifi restart every day.

Hi, I was wondering if someone could point me to the right direction. I recently bought Asus RT-N12HP as an upgrade from my default unifi router, as my 2nd floor of the house getting poor reception.

As finish set all the setting needed, my wired connection seems fine, but the wifi works like for the 1st 1 minute then when gila-gila. After that 1 minute, there is no internet connection even the wifi is connected, after several minute of trying, I cant even connect to the wifi (all password are correctly typed), It keep telling me cant connect to the wifi, even its in 5 bars.

I have tried connect using my ipad2, notebook with its default wifi and with an extra USB wifi. All in same result.
Mostly getting "Windows can't connect to my "wifi SSID"", sometime even can connect to my wifi, I'm getting 0 internet access or limited connectivity. I also tried troubleshoot button on the wifi icon. Same result.

Is it my setting problem? or the item is manufactured defect?
I didn't touch much of the settings, mainly all in their default setting.
When I throw back in the TM unifi router, everything works fine.


- I have tried various "Authentication Method" aka security level, even Open, it still same result.
- I also in 2-10meter range only from the router

*Within the 1st 1 minute wifi connectivity I was able to surf internet, I tried the download speed, it only took up 10% of my unifi 10mb package.. the range between the pc and the router is just 1m apart....

Hi wengjoe,

Try update the firmware to the latest and try again.

The current firmware version is Beta Version 3.0.0.4.374.2239.

http://www.asus.com/Networking/RTN14UHP/#support

Remember to do a factory reset after you have done updating.

And may I know what model of wifi card you are using?

Thank you

Hi Asusmy,

currently using Intel Centrino Wireless N-2230 that came together with my Lenovo Y500.

my current firmware version is 3.0.0.4.374_1217, does updating firmware will solve the issue ?

more like a setting issue or my wifi card is capable only at 150mbps...

Dear ASUSmy, can you direct me what did I do wrong?

Hi Edison83,

You can try set a value at the Control Channel.

Thank you

whats the recommended value?

Hi Edison83,

You can use the software below to scan your surrounding and use the one that is less people use. Or you can try fix it at 6 to test.

http://www.inssider.com/

Thank you

Did this, ntg came up, do i need to manually enter?

BTW only 6to4 works which translate only ipv4 to ipv6, how to do pure native ipv6 like others =(

Hi Edison83,

You can use the software below to scan your surrounding and use the one that is less people use. Or you can try fix it at 6 to test.

http://www.inssider.com/

Thank you

Hi Edison83,

You can use the software below to scan your surrounding and use the one that is less people use. Or you can try fix it at 6 to test.

http://www.inssider.com/

Thank you

Hi warlove3,

Maybe this is because the UNIFI are using dual stack platform?

http://unifidr.blogspot.com/2013/09/congra...ipv6-ready.html

Do let me know if I am wrong.

Thank you

Hi Asusmy,

currently using Intel Centrino Wireless N-2230 that came together with my Lenovo Y500.

my current firmware version is 3.0.0.4.374_1217, does updating firmware will solve the issue ?

more like a setting issue or my wifi card is capable only at 150mbps...

I have finally tracking the S.O.B that been causing the problem.
I notify you just for the future record.

The main cause is WFTPairing.exe which a software use by new Canon camera to wirelessly upload the picture from the camera to the computer using wifi connection. If the software were to launch during startup, it will disable all wifi within the connected PC router. By close the program WFTpairing.exe the whole wifi immediate usable again. So whoever owned a new Canon camera and transfer picture wirelessly may faced this problem in the future. I'm not sure if its just Asus Router or it apply to all router when you changed router.

As for the WFTPairing.exe fix

"Well, I tried running the WFTPairing as admin, and it started working. So if you just check "Add WFT Pairing to startup folder" will not work in Windows-8 as it runs under regular access."

source of fix : http://forums.usa.canon.com/t5/EOS/WFTPair...ws-8/td-p/15189
*Although he said later that it didn't work, mine still working after a few restart.

now everything rise and shine. Thanks to everyone tried to help me
On the other note, how do I boost the wifi signal? is by Tx power adjustment? by default it 80mW so I increase it more? please advice.