sorry this is mr3420 version of AA RC1

http://downloads.openwrt.org/attitude_adju...hfs-factory.bin

This post has been edited by chuahcs79: Nov 28 2012, 12:45 AM

How about Ignore Ping / Forbid Ping From WAN / LAN Port?
Can use ? Now im still working, Need to test when going back home this morning.

hope someone can compile openwrt with the needed package to use 3g function
it would be great, if openwrt easy to understand....
you have test it chuah?

well i am a beginnner in openwrt just like you

i try, but somehow somewhere i lost the way,. dont get it at all

I read the tutorials on how to compile all the needed package together but seems likes the guides are shown in Linux-based OS

Right now too lazy to install a Virtual Machine to actually test it out

HuuuuLuuuu

This post has been edited by ibnuasad: Nov 28 2012, 02:05 AM

i think u capable to compile a whole image with 3G include,.

---

Added on November 28, 2012, 2:43 amafter install the AA 12 RC1 for mr mr3420 V1

this is the result i get



Here's the link for latest newest Attitude Adjustment 12.09 RC1 newest version

Here

This post has been edited by chuahcs79: Nov 28 2012, 04:28 AM

got freetime today at work.. lemme try.. lol..

DOne Disable SP1 Firewall.... For this moment the LED always Purple..

This post has been edited by hairul: Nov 28 2012, 09:54 AM

OpenWRT and DDWRT wont give you Higher Speed.

These 2 enhanced FW for Routers will only give you WiFi Freedom and Stability, hence a speedtest showing Highspeed does not necessary Guarantee High Speed for everyone. Chuah's case is different cause he live in an area that can Max out on his QoS of 16000/8640 due to several reasons, namely

1) His proximity to a FEW MAXIS TOWERS there

2) The density of users there, maybe those pipu there dun use M3G internet, hence he sapu all the Bandwidth.

3) The height of his Unit in his Apartment

4) Clear line of sight of the Towers.

5) I believe the area around Maxis Flagship Building, KLCC area have excellent signal but users there complained they dun get good speed even the QoS is 42000/8640 , Why ? simple, Users Density so is HIGH, everyone is fighting for Bandwidth, hench they got sucky speed.

If you guys wan Stronger WiFi and Better Stability on your connection, try the 2 routers trick which i mooted. Even Chuah is using it now. Like one of you guys mentioned before, using 2 Routers is like running a Dual Core processor compared to a Single Router. It does helps on the power distribution of the routers. One router to do the job of dialing of the modem and connection and another router to do the channeling of the signal for usage, LAN or WiFi.

I believe a third factor which might help to get the best out of the setup, that is to utilise Gigabit LAN ports or Switches.
Best combo is Router A( Gigabit LAN port present) dial in > Router B ( also Gigabit LAN port present ) > LAN out to Gigabit Switch ~ mutiple pcs /WiFi out . The dial in router should be OpenWRT and router B should be DDWRT.
It was said that DDWRT have issues with dial into 3G USB modems, so we have to use a OpenWRT router to do the dial job. DDWRT have better management, so we will use it to manage the second router.

Chuah, the ball is at your feet now. Prove to us that you a C7 or Messi now.

If I have time I would compile too

Just too lazy to setup gcc compiler

i'm lazy to cross compile actually.. the toolchain is a mess.. haha..
now downloading the trunk sources.. anyone work for telekom?
any problem with ur vps for KKM?
line so slow these days..

My OVH is running okay

Except for yesterday night my Maxis super high ping to everywhere, can't even SSH properly

hurm.. my office VPS through TM is acting up.. the contractors havent replaced the equipment yet.. so, still a 2mbps line.. heard the new one is
ok.. OOT already..

oh i forget to mention that result is using v1 alone with new openwrt plus wifi out :Dfrom last night till now still using v1 alone to dial 3g modem + wifi out. No issue at all. Single routers working great so far

This post has been edited by chuahcs79: Nov 28 2012, 04:42 PM

Seems like Disable Firewall on V2, Auto Ping still not working in using V1 that connected to V2...

Yes else the Firewall will false detect the loop ping as SSYN flood

This router too secure

Anyway TS please pin this on first post

SSYN disable also cant get thru?
Need to use direct with modem, then auto ping will work.
Later want to try disable all others security and try again.

Maybe Chuah can test? V1 (openwrt) Run Auto ping Connect to Stock V2.

This post has been edited by hairul: Nov 29 2012, 01:38 AM

i am using V2 to dial zte mf680 and lan out to V1 openwrt ( DHCP with auto ping command ) &

V1 dial zte mf680 and lan out to V2 stock


my both way setup is fine though,..

here my V1 pinger in system log

This post has been edited by chuahcs79: Nov 29 2012, 03:23 AM

chuahcs,

if upgrading the openwrt firmware from old openwrt...do i need to install the package again?

Chuah, does the LED always Purple Colour? How do you access webui to 1st Router (V2) when your PC connect to V1 LAN while V1 are connect to V2?

This post has been edited by hairul: Nov 29 2012, 07:43 AM