my ZTE MF680 already wrongly flash to swedish firmware under 3 last time so no more purple LED, only blue Led all the way

make sure the lan cable plug in yellow lan port in first router

and plug lan cable in blue lan port in second router

then u go to second router GUI sign in

and select DHCP Protocol ( in openwrt ) or Wan only ( in stock firmware )

then open another Tab window sign in first router Gui,

due to V1 = 192.168.1.1 & V2 = 192.168.0.1 then both can combine

---

Added on November 29, 2012, 3:44 pmyes packages always need to re install after flashing/upgrade done

This post has been edited by chuahcs79: Nov 29 2012, 03:44 PM

chuahcs
the link at first post is old firmware right?
not the AA RC1 right?

AA RC1 is also posted there below the old firmware under the video tutor

got any improvement on V1 for new version AA RC1?

it is faster for sure,

and for under modem device dont have to restart for your modem device to appear on the list,

so far only discover that few,. i am still using and checking the different

Whenever i change or select DHCP setting (Disable/Enable etc) , the router will become softbrick...

hmmm, mine so far is mine though whenever switching between DHCP or 3G

tunlr helps me watch tv, yay!

This post has been edited by noobandroid: Nov 29 2012, 08:54 PM

i sapu hulu.com everyday, no more download

no more vpn~~

without openwrt,

u also can watch,

when u want to watch, just change the DNS will do

lazy need keep change leh

well there is no soultion to -> lazyness

until openwrt configs,

make sure u are loading newer AA 12RC1 version of openwrt

already lu~

enjoy

huh signal 18,99

full signal = 31,99

yours consider medium

haha halfway only