Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

Enterprise Networking Mikrotik Routers (RouterBoard & RouterOS), User and owner discussion group

views
     
go626201
post Feb 20 2022, 05:59 PM

Regular
******
Senior Member
1,882 posts

Joined: Sep 2017
QUOTE(Anime4000 @ Feb 20 2022, 05:36 PM)
not really, but doing 10GbE networking is nice tho, 1GbE hardly over-saturated SSD NAS.

Indeed SFP run hot even SFP XPON ONU can reach 61°C, Realtek SoC + Laser is very hot, pumping ~3dB back to TM OLT,
[attachmentid=11097607]
*
S+RJ10 should be getting more higher temp than normal SFP adapter so i still not going to play around with it.. tongue.gif
maybe next few year got better chip or solution then at that time,i will try to get one for use. (Future-maybe with CCR router brows.gif )
Anime4000
post Feb 20 2022, 06:13 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
QUOTE(quadcube @ Feb 20 2022, 05:53 PM)
ah, but damn..without ipv6, the congestion is really bad at peak period sweat.gif mine is an IPv6 only IPOE connection (dual stack via ds-lite), can't avoid it sweat.gif

eh? I thought MY gives out prefix? because my DHCP client gets the prefix from TM/Maxis and mikrotik side assigns the v6DHCP addresses from the prefix pool to the rest of the LAN devices (if I understands it correctly) sweat.gif

will try setting it again after going through your guide
my S+RJ10 runs at 88 celsius at low load, even with small heat sinks pasted to it laugh.gif
*
I tried /60 /52 /48 none of them are working... cannot do multiple subnet if like this, isolate IoT Device and PC's

ND is pretty simple, it use device MAC Address as IP Address, or IPv6 Token like this 2001:d08:e6:44fa::1000

many my web-server use IPv6 only to Cloudflare, no need HAProxy or Traefik.
Gaara92
post Feb 21 2022, 04:25 PM

Herald
****
Junior Member
612 posts

Joined: Mar 2008
QUOTE(Anime4000 @ Feb 20 2022, 03:16 AM)
you know where to find server case that fit in that rack? I want transform gaming case
*
There is 4U short server case that fits in 550mm depth like this one https://shopee.com.my/4U-SERVER-CASING-~-NA...2152.7940837552

QUOTE(Anime4000 @ Feb 20 2022, 06:13 PM)
I tried /60 /52 /48 none of them are working... cannot do multiple subnet if like this, isolate IoT Device and PC's

ND is pretty simple, it use device MAC Address as IP Address, or IPv6 Token like this 2001:d08:e6:44fa::1000

many my web-server use IPv6 only to Cloudflare, no need HAProxy or Traefik.
*
If you are on unifi/maxis biz they give out /56 prefix to you.
tj01
post Feb 21 2022, 08:50 PM

New Member
*
Junior Member
25 posts

Joined: Feb 2006
and stingy Time only /64
Anime4000
post Feb 25 2022, 05:49 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
QUOTE(Gaara92 @ Feb 21 2022, 04:25 PM)
There is 4U short server case that fits in 550mm depth like this one https://shopee.com.my/4U-SERVER-CASING-~-NA...2152.7940837552
If you are on unifi/maxis biz they give out /56 prefix to you.
*
I have tried to modify office unifi (@unifibiz) router with /56, not working... this need to request?
Gaara92
post Feb 27 2022, 07:09 PM

Herald
****
Junior Member
612 posts

Joined: Mar 2008
QUOTE(Anime4000 @ Feb 25 2022, 05:49 PM)
I have tried to modify office unifi (@unifibiz) router with /56, not working... this need to request?
*
Yes try request it manually.
Anime4000
post Mar 3 2022, 01:10 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
quadcube Gaara92

Yesterday I went and buy RB5009
Attached Image

after finish configure
Attached Image

that USB cable is Maxis 4G Dongle

problem with 7.x DCHPv6-PD not working, it keep searching...

This post has been edited by Anime4000: Mar 3 2022, 01:13 PM
go626201
post Mar 3 2022, 02:39 PM

Regular
******
Senior Member
1,882 posts

Joined: Sep 2017
QUOTE(Anime4000 @ Mar 3 2022, 01:10 PM)
quadcube Gaara92

Yesterday I went and buy RB5009
Attached Image

after finish configure
Attached Image

that USB cable is Maxis 4G Dongle

problem with 7.x DCHPv6-PD not working, it keep searching...
*
DHCPv6-PD problem only happens on PPPoE VLan... I also waiting mikrotik to solve it,but i think maybe need wait half year to one year until they solve other ROS7 issue first...
Mikrotik forum got workaround to mitigate the issue,but i dont know how to do without additional device.(Someone said add another switch that handle vlan can mitigate it)
OlgaC4
post Mar 3 2022, 03:17 PM

Look at all my stars!!
*******
Senior Member
5,296 posts

Joined: Nov 2006
QUOTE(Anime4000 @ Mar 3 2022, 01:10 PM)
quadcube Gaara92

Yesterday I went and buy RB5009
Attached Image

after finish configure
Attached Image

that USB cable is Maxis 4G Dongle

problem with 7.x DCHPv6-PD not working, it keep searching...
*
Where got stock ?
thankyou
post Mar 3 2022, 03:46 PM

Regular
******
Senior Member
1,941 posts

Joined: Jan 2003
May consider switching ER-12 -> RB5009... Afterall I'm more used to Mikrotik settings compared to Ubiquiti CLI.

Wonder what's the 2nd hand ER-12 price right now...
Anime4000
post Mar 3 2022, 04:58 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
QUOTE(go626201 @ Mar 3 2022, 02:39 PM)
DHCPv6-PD problem only happens on PPPoE VLan... I also waiting mikrotik to solve it,but i think maybe need wait half year to one year until they solve other ROS7 issue first...
Mikrotik forum got workaround to mitigate the issue,but i dont know how to do without additional device.(Someone said add another switch that handle vlan can mitigate it)
*
Thing I have tried
CODE

sfp-sfpplus1 -> vlan621 == bridge -> pppoe-out1

CODE

sfp-sfpplus1 == bridge -> vlan621 -> pppoe-out1

both not work, someone said downgrade to v6.49.4, I not tried it yet

QUOTE(OlgaC4 @ Mar 3 2022, 03:17 PM)
Where got stock ?
*
I bought at https://www.synchroweb.com/, give a call, stock is limited

QUOTE(thankyou @ Mar 3 2022, 03:46 PM)
May consider switching ER-12 -> RB5009... Afterall I'm more used to Mikrotik settings compared to Ubiquiti CLI.

Wonder what's the 2nd hand ER-12 price right now...
*
yea, I like Mikrotik WinBox, so I plan to sell my RB12 for RM600 sweat.gif
go626201
post Mar 3 2022, 07:38 PM

Regular
******
Senior Member
1,882 posts

Joined: Sep 2017
QUOTE(Anime4000 @ Mar 3 2022, 04:58 PM)
Thing I have tried
CODE

sfp-sfpplus1 -> vlan621 == bridge -> pppoe-out1

CODE

sfp-sfpplus1 == bridge -> vlan621 -> pppoe-out1

both not work, someone said downgrade to v6.49.4, I not tried it yet
RB5009 is ROS v7 only,downgrade is not possible.
Anime4000
post Mar 3 2022, 08:15 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
QUOTE(go626201 @ Mar 3 2022, 07:38 PM)
RB5009 is ROS v7 only,downgrade is not possible.
*
yea, stock firmware I got is 7.0.5, this time IPv6 not available which is sad, IPv4 IX has many hop and higher latency
thankyou
post Mar 4 2022, 10:55 PM

Regular
******
Senior Member
1,941 posts

Joined: Jan 2003
Interesting product... I wonder how does it work to integrate to server? Home server?

USD199 is okay... not too expensive...

https://mikrotik.com/product/ccr2004_1g_2xs...-specifications

QUOTE
CCR2004-1G-2XS-PCIe
A smart PCIe network interface card that adds full-fledged router capabilities to your servers. The smart and easy way to create 25 Gigabit networks if you want to save space in your server room!




This post has been edited by thankyou: Mar 4 2022, 10:57 PM
Anime4000
post Mar 5 2022, 03:22 AM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null
QUOTE(thankyou @ Mar 4 2022, 10:55 PM)
Interesting product... I wonder how does it work to integrate to server? Home server?

USD199 is okay... not too expensive...

https://mikrotik.com/product/ccr2004_1g_2xs...-specifications
*
Host see this card as Normal Ethernet, it show 4 Ethernet like any other 4 port NIC
Attached Image

However, if you using non-server motherboard, have a problem: Boot too fast before CCR2004-1G-2XS-PCIe fully boot, host wont see it

this can be fixed if you using Server Motherboard,

but if you using consumer motherboard (B450, B550, X570) enable these: Intel-Vd/AMD-Vi, IOMMU, SR-IOV, PCIe Hotswap, "pcie_acs_override=downstream,multifunction", this allow host "re-attach" the card after boot-up

with "pcie_acs_override=downstream,multifunction" even nicer, let say you have 4-port NIC, each port can be pass-through to KVM
kunited
post Mar 7 2022, 02:33 AM

New Member
*
Junior Member
16 posts

Joined: Aug 2019
Hi all,

I need some help setting up Maxis VOIP on hAP ac2. I've already got Internet working by below:
1. Create new VLAN under Interfaces menu for VLAN 11 and selected eth port 1 as the interface.
2. Plug ethernet cable from the Huawei HG8240H port 1 to hAP ac2 port 1.
3. Create new PPPOE client with my Maxis credentials
4. Set the NAT firewall rule to have out interface=ppoe client.

So far Internet works. I then created VLAN 14 for VOIP, set it to eth2, then plug the eth2 to Archer C5v (set to bridge mode) from Maxis. But no dice here the VOIP doesn't work. I suspect I'm missing some bridging settings for this to work.

Connection as below:
Huawei ONT---Mikrotik hAP ac2---Archer C5v (bridge mode)

Happy to provide more info if info above is not sufficient.
kunited
post Mar 7 2022, 11:30 AM

New Member
*
Junior Member
16 posts

Joined: Aug 2019
QUOTE(kunited @ Mar 7 2022, 02:33 AM)
Hi all,

I need some help setting up Maxis VOIP on hAP ac2. I've already got Internet working by below:
1. Create new VLAN under Interfaces menu for VLAN 11 and selected eth port 1 as the interface.
2. Plug ethernet cable from the Huawei HG8240H port 1 to hAP ac2 port 1.
3. Create new PPPOE client with my Maxis credentials
4. Set the NAT firewall rule to have out interface=ppoe client.

So far Internet works. I then created VLAN 14 for VOIP, set it to eth2, then plug the eth2 to Archer C5v (set to bridge mode) from Maxis. But no dice here the VOIP doesn't work. I suspect I'm missing some bridging settings for this to work.

Connection as below:
Huawei ONT---Mikrotik hAP ac2---Archer C5v (bridge mode)

Happy to provide more info if info above is not sufficient.
*
Turns out I just need to add eth1 to the default bridge, now VOIP works thumbup.gif

go626201
post Mar 23 2022, 10:15 PM

Regular
******
Senior Member
1,882 posts

Joined: Sep 2017
What's new in 7.2rc5 (2022-Mar-23 12:04):
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;

Finally fix?
I haven't install the new beta,going to try it later tonight. rclxms.gif

Edit:
Fix confirmed. Unifi ipv6 prefix working now.

This post has been edited by go626201: Mar 24 2022, 02:20 AM
cwtien
post Mar 24 2022, 09:27 AM

Casual
***
Junior Member
477 posts

Joined: Jan 2003
From: Seri Kembangan
QUOTE(go626201 @ Mar 23 2022, 10:15 PM)
What's new in 7.2rc5 (2022-Mar-23 12:04):
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;

Finally fix?
I haven't install the new beta,going to try it later tonight. rclxms.gif

Edit:
Fix confirmed. Unifi ipv6 prefix working now.
*
Oh yeah! Am waiting for this!

I hope it gets pushed to next month's stable release. I'm running on 7.1.5 right now.
haturaya
post Mar 27 2022, 06:45 PM

Look at all my stars!!
Group Icon
Elite
2,559 posts

Joined: Jan 2003
QUOTE(go626201 @ Mar 23 2022, 10:15 PM)
What's new in 7.2rc5 (2022-Mar-23 12:04):
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;

Finally fix?
I haven't install the new beta,going to try it later tonight. rclxms.gif

Edit:
Fix confirmed. Unifi ipv6 prefix working now.
*
Good news indeed thumbsup.gif
« Next Oldest · Networks and Broadband · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0308sec    0.65    6 queries    GZIP Disabled
Time is now: 21st December 2025 - 04:53 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.