Hi all,

I need some help setting up Maxis VOIP on hAP ac2. I've already got Internet working by below:
1. Create new VLAN under Interfaces menu for VLAN 11 and selected eth port 1 as the interface.
2. Plug ethernet cable from the Huawei HG8240H port 1 to hAP ac2 port 1.
3. Create new PPPOE client with my Maxis credentials
4. Set the NAT firewall rule to have out interface=ppoe client.

So far Internet works. I then created VLAN 14 for VOIP, set it to eth2, then plug the eth2 to Archer C5v (set to bridge mode) from Maxis. But no dice here the VOIP doesn't work. I suspect I'm missing some bridging settings for this to work.

Connection as below:
Huawei ONT---Mikrotik hAP ac2---Archer C5v (bridge mode)

Happy to provide more info if info above is not sufficient.

Turns out I just need to add eth1 to the default bridge, now VOIP works