Thing I have tried


both not work, someone said downgrade to v6.49.4, I not tried it yet

I bought at https://www.synchroweb.com/, give a call, stock is limited

yea, I like Mikrotik WinBox, so I plan to sell my RB12 for RM600

RB5009 is ROS v7 only,downgrade is not possible.

yea, stock firmware I got is 7.0.5, this time IPv6 not available which is sad, IPv4 IX has many hop and higher latency

Interesting product... I wonder how does it work to integrate to server? Home server?

USD199 is okay... not too expensive...

https://mikrotik.com/product/ccr2004_1g_2xs...-specifications





This post has been edited by thankyou: Mar 4 2022, 10:57 PM

Host see this card as Normal Ethernet, it show 4 Ethernet like any other 4 port NIC


However, if you using non-server motherboard, have a problem: Boot too fast before CCR2004-1G-2XS-PCIe fully boot, host wont see it

this can be fixed if you using Server Motherboard,

but if you using consumer motherboard (B450, B550, X570) enable these: Intel-Vd/AMD-Vi, IOMMU, SR-IOV, PCIe Hotswap, "pcie_acs_override=downstream,multifunction", this allow host "re-attach" the card after boot-up

with "pcie_acs_override=downstream,multifunction" even nicer, let say you have 4-port NIC, each port can be pass-through to KVM

Hi all,

I need some help setting up Maxis VOIP on hAP ac2. I've already got Internet working by below:
1. Create new VLAN under Interfaces menu for VLAN 11 and selected eth port 1 as the interface.
2. Plug ethernet cable from the Huawei HG8240H port 1 to hAP ac2 port 1.
3. Create new PPPOE client with my Maxis credentials
4. Set the NAT firewall rule to have out interface=ppoe client.

So far Internet works. I then created VLAN 14 for VOIP, set it to eth2, then plug the eth2 to Archer C5v (set to bridge mode) from Maxis. But no dice here the VOIP doesn't work. I suspect I'm missing some bridging settings for this to work.

Connection as below:
Huawei ONT---Mikrotik hAP ac2---Archer C5v (bridge mode)

Happy to provide more info if info above is not sufficient.

Turns out I just need to add eth1 to the default bridge, now VOIP works

What's new in 7.2rc5 (2022-Mar-23 12:04):
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;

Finally fix?
I haven't install the new beta,going to try it later tonight.

Edit:
Fix confirmed. Unifi ipv6 prefix working now.

This post has been edited by go626201: Mar 24 2022, 02:20 AM

Oh yeah! Am waiting for this!

I hope it gets pushed to next month's stable release. I'm running on 7.1.5 right now.

Good news indeed

New to mikrotik.... RB951G to pair with TIME 500mbps.... can max out speed (with fastrack) ... more feature compare with other router

looking forward its uptime stability

probably will invest either RB3xxx or hap ac2 next year

This post has been edited by machai_world: Mar 30 2022, 11:21 PM

Router is old (i believe its good during unifi VIP5/10 season) hahaha...

but performance wise is ok compare with my Tp-link archer c6 (idling 40~60% cpu ,sometime hit 90%)

This post has been edited by machai_world: Mar 31 2022, 01:15 AM

Hello,
Sorry if this is it the right place to post this question.
Anyone know where to buy the rackmount ears for RB4011 ?

Thanks

Go get any of the Taobao forwarding agents at Services Noticeboard subforum to get it from here.

Will check, thanks for your help

Anynone here want to letgo their RB5009? So hard to find one locally used or new.

RouterOS is very stable. I've been running it for 10 years (in a few months) and I've not once come across an issue due to RouterOS.
I've encounter other issues but it was due to the hardware (faulty internal 3.3V supply, which I've fixed) and not due to the RouterOS.

I can say it's on par or even more stable than IOS (not iOS).
Btw, I run v6 Long Term code.

sound convincing, thats why plan to upgrade next year hehehe

Click here

saw subtel sell in lazada

This post has been edited by machai_world: Apr 11 2022, 10:26 AM

Already mesaged them. Waiting for restock around July