Seen it on shopee asking for rm900 but I never buy from the shop also.

quadcube Gaara92

Yesterday I went and buy RB5009
[attachmentid=11106066]

after finish configure
[attachmentid=11106067]

that USB cable is Maxis 4G Dongle

problem with 7.x DCHPv6-PD not working, it keep searching...

Can u check the temp showing on the Winbox-System-Health?
Mine is showing 40°C CPU temp with a 2x12cm usb fan under RB5009. (Normally should between 45-55°C)
I didn't use the 2.5Gb and SFP+ port.

Thanks everyone, ROS7 made possible to do IPv6 NAT,

To Malaysia ISP:
You have failed to give us at least /60 subnet, we going to use IANA reserve IPv6 address, because of this mess, ISP at fault...
Oh yea, I haven't make proper guide to replace SFU (Switch Fabric Unit) ONU with GPON ONU SFP,

EDIT:
I have made full guide that apply with TM-Unifi, TM-Maxis, Allo and TIME
https://www.hitoha.moe/odi-dfp-34x-2c2-gpon-onu-sfp/

I just put a 240mm usb fan under RB5009. Temp 39°C. 
[attachmentid=11176291]

You guys got use Queue(QoS) or only enable fasttrack only for unifi/maxis?

I trying to setup queue but the result still not satisficed , running max download speed still affected latency...
Bufferblot test keep giving A only,still unable to get A+

I thought bridge mode btu does not affect performance?
I also want to change the btu,because i think this btu got some problem,but i not sure is my area issue or not,
Sometime the rj11 phone will suddenly drop the call while using the phone. (And i having this issue about 6-7 years ao since from my previous home with the same btu and nearby resident area-different taman)

Thanks to hasmidzul_jojo for pointing out the video.

https://www.youtube.com/watch?v=aRPKUDvNyjM

hAP ax2 (RBD52Gi-5HaxD2HaxD-TC ?)
• Took nearly forever. LOL. At least he admits it.
• Should be IPQ6000
• Quad Core 1Ghz
• MU-MIMO
• WPA3
• 802.11ax dual chain (2x2) 80Mhz
• AX1800
• 4.5 dBi gain in 2.4Ghz
• 4 dBi gain in 5Ghz
• 1GB Ram
• 5 x GBe (1 is PoE in/out)
• USB 3.0 port
• DC 12-28v
• No more rubbery finish like hAP ac2

So basically same performance class as Deco X20, Asus XD4 or DLink M15. Of course, RouterOS will be its strength. Price wise? RM400 each? X20 is RM520-580 for 2 units.

Ya lor, no USB3 port according to the brochure and product page.
https://mikrotik.com/product/hap_ax2

Price is USD99. Not bad. Should be able to get below RM500 here.