msg synchroweb..they inform rb5009 probably arrive around this two week

Thank you for the info. Gonna contact them soon

RB5009 subtel got stock now. sales person tel no.0163050261

Thanks for the inform. Just picked one up.

Lazada Subtel also had it in stock when I checked just before going to their office. Now I see it’s OOS. So many ppl waiting for this?!?!

This post has been edited by soonwai: Apr 22 2022, 06:45 PM

RouterOS 7 quite stable now.
So RB5009 is quite useful for most people. (But for me it got a downside- vpn encryption hardware acceleration is not working or not fully functional,so the vpn speed will be lower and also cpu usage is quite high for vpn usage)
My vpn usage for Wireguard and IPsec - 500+ mbps download cost 60+% cpu utilization.
Other then that,so far so good. 800mbps unifi only use below 10% cpu with fasttrack,and without fasttrack also quite good in my memory.

Update:

Wireguard Server: Nordvpn SG (Midnight can run full unifi speed to SG)

This post has been edited by go626201: Apr 23 2022, 02:32 AM

Adoi.. miss again this time? just read about this.. hopefully still got some stock.

Try direct to Subtel? Maybe they still have stocks but have not updated Lazada.

They said got plenty.. Stock at lazada & shopee updated.. around 40 unit.

Quick question, do you recommend Mikrotik hAP ac3 to replace my Asus ac86u? Currently I'm using it as an AP, connect to some of my family and smart home devices.

This post has been edited by mamakap: Apr 23 2022, 10:36 PM

I don't know about hAP ac3 but honestly, Mikrotik's wifi is just ok. Nothing to shout about. Not sure if hAP ac3's wave2 support has improved things. I'm using hAP ac2 and hAP ac (both no wave2.)

RB 5009 very hot when operating. Is this normal?

This post has been edited by OlgaC4: Apr 24 2022, 04:50 PM

Can u check the temp showing on the Winbox-System-Health?
Mine is showing 40°C CPU temp with a 2x12cm usb fan under RB5009. (Normally should between 45-55°C)
I didn't use the 2.5Gb and SFP+ port.

This post has been edited by go626201: Apr 24 2022, 07:57 PM

no fan is about 50°C with no activity.

Hi... im using Hap ac2, dun have any idea to apply ipv6 public and private ip?

no idea to setting...but still stuck at ipv4 public.. and didnt found to fast track ipv6

This post has been edited by machai_world: Apr 24 2022, 10:25 PM

For malaysia vlan ipv6,u can follow this guide- https://forum.lowyat.net/index.php?showtopi...&#entry63945436
If not strongly needed for ipv6,better do not enable ipv6 on unifi now.(maybe next year or next 2 year better,now still not stable enough to use)

Mikrotik IPv6 does not support fasttrack now,it will be implement in ROS7 future version but still does not have timeframe for it,so i think next year or next 2 year should be getting IPv6 fasttrack on mikrotik.

Currently,for RB5009 without ipv6 fasttrack,the cpu usage to use full 800mbps unifi is around 25-35% for 800mbps download,and around 6-12% for 200mbps upload.

My unifi dream machine 82 after reboot and reaching 85 after a while, still working fine without any external fan.. Dunno how correct this is.. But than can feel the heat when touching the router. Sell it already. Now waiting for RB5009.

I believe the 45-55 should be fine. They even tested the router for 60 ambient.. For me under 70 is still ok.. 80 maybe need cooling.

Noted, thanks for ur opinion

Disable anything you are not using can reduce the temperature up to 5degree on RB5009

I have to differ.
I don't recall having much issues with IPv6 on UniFi previously (since 5Mbps days, then 10Mbps)
No issues on TIME now too.

All my supported end devices have global IPv6 addresses, been running this for many years.

I usually use this to test IPv6 connectivity, unless there's any major issues, it's 10/10.
https://test-ipv6.com/

On Tests Run tab,
Test with IPv4 DNS record
ok (1.032s) using ipv4
Test with IPv6 DNS record
ok (0.820s) using ipv6
Test with Dual Stack DNS record
ok (0.813s) using ipv6
Test for Dual Stack DNS and large packet
ok (0.333s) using ipv6
Test IPv6 large packet
ok (2.110s) using ipv6
Test if your ISP's DNS server uses IPv6
ok (1.390s) using ipv6
Find IPv4 Service Provider
ok (1.091s) using ipv4 ASN 9930
Find IPv6 Service Provider
ok (0.929s) using ipv6 ASN 9930


Other IPv6 test sites,
https://ipv6-test.com/ <- I get 19/20 on this, because there's no reverse DNS record.
https://ipv6test.google.com/

This post has been edited by 1zx: May 3 2022, 10:33 AM

I actually don't install packages that i don't use. Less potential exploit surface too.

For those interested, i only run these.

advanced-tools
dhcp
ipv6
ntp
ppp
routing
security
system

This post has been edited by 1zx: May 3 2022, 10:37 AM